Advertisement

Measurement of DC and AC Response Curves of a Bipolar Transistor as a Function of Frequency

  • A. A. TitkovEmail author
  • A. L. Khvalin
RADIO MEASUREMENTS

We discuss improving the reliability of measured DC and AC response curves for a bipolar transistor as a function of frequency using the mass-produced 2T937 transistor (Russia) as an example. We describe preparations for measurement and the actual measurements in considerable detail. We provide experimental response curves for the 2T937 transistor. A special test (measurement) board was developed to prevent the measured response curves from being affected in any way by the transistor mount or interface hardware (power buses, soldering leads, matching devices, adapters, etc.). A bare transistor chip was used to eliminate any effect of the transistor package on the results and improve the size and weight specifications of devices using the 2T937 transistor. The transistor chip can be directly mounted to a test board whose topology is used to connect the transistor chip to the device. The microstripline board is designed to enable measurements to be performed in the microwave frequency band using a probe station with standard calibration.

Keywords

bipolar transistor bare transistor chip test (measurement) board DC and AC response curves extremely-high-frequency range 

References

  1. 1.
    V. A. Shvandara (ed.), Standardization and Management of Product Quality: Textbook, YuNITI-DANA, Moscow (2001).Google Scholar
  2. 2.
    S. B. Danilevich and S. S. Kolesnikov, “Selection of indicators for reliability of inspection results,” Zakonodat. Prikl. Metrol., No. 2, 48–51 (2008).Google Scholar
  3. 3.
    A. L. Khvalin, Analysis and Synthesis of Integrated Magnetically Controlled Ferrite Resonator Radio Devices: Auth. Abstr. Doct. Dissert. Eng. Sci. PGATI, Samara (2014).Google Scholar
  4. 4.
    Μ. P. Apin, A. G. Balabolin, and A. L. Hvalin, “Modeling the response curves of the 2T937 bipolar transistor. Part I. DC response curves,” Radiotekhnika, No. 7, 125–128 (2017).Google Scholar
  5. 5.
    Μ. P. Apin, A. G. Balabolin, and A. L. Hvalin, “Modeling the response curves of the 2T937 bipolar transistor. Part II. AC response curves as a function of frequency,” Radiotekhnika, No. 7, 129–135 (2017).Google Scholar
  6. 6.
    A. L. Khvalin, “A vector magnetometer for measuring weak fields,” Izmer. Tekhn., No. 10, 45–48 (2014).Google Scholar
  7. 7.
    A. L. Khvalin, “Physical principles for modeling field-effect transistors in the microwave region,” Geteromagn. Mikroelektr., No. 4, 59–67 (2008).Google Scholar
  8. 8.
    V. N. Samoldanov, A. A.Ignat’ev, A. V. Lyashenko, et al., “Computer modeling of ferrite resonators in the internal circuitry of a bipolar transistor operating in amplification mode,” Geteromagn. Mikroelektr., No. 1, 110–118 (2004).Google Scholar
  9. 9.
    R. Yu. Malakhov and E. M. Dobychina, “High-power transistors for on-board radar systems,” Nauch. Vest. MGTU GA, No. 12 (186), 184–190 (2012).Google Scholar
  10. 10.
    R. Yu. Malakhov, “Determination of parameters for microwave transistors,” Nauch. Vest. MGTU GA, No. 209, 136–144 (2014).Google Scholar
  11. 11.
    S. G. Piligin, USSR Invent. Certif. 1730600, “A test board for measuring the parameters of microwave transistors,” Izobreteniya, No. 16 (1992).Google Scholar
  12. 12.
    V. N. Semenenko, V. A. Chistyaev, A. A. Politiko, and K. M. Baskov, “Test stand for measuring the free-space electromagnetic parameters of materials over an ultrawide range of microwave frequencies,” Izmer. Tekhn., No. 2, 55–59 (2019), DOI:  https://doi.org/10.32446/0368-1025it.2019-2-55-59.
  13. 13.
    Yu. V. Ryasnyy, A. V. Borisov, A. N. Loskutov, and M. S. Chashkov, Patent 2 361 227 RF, “A method for measuring the S parameters of microwave transistors in linear mode,” Otkryt. Izobret., No. 19 (2009).Google Scholar
  14. 14.
    A. G. Vasil’ev and M. M. Krymko, “Current issues in development of the necessary range of high-power semiconductor devices and modules based on such devices at NPP Pulsar,” Elektron. Tekhn. Ser. 2. Poluprovodn. Prib., No. 1, 79–88 (2008).Google Scholar
  15. 15.
    V. G. Maksimenko, “Compensation of motion-induced noise for an electric-field-strength sensor electrode in seawater,” Izmer. Tekhn., No. 1, 58–62 (2019), DOI:  https://doi.org/10.32446/0368-1025it.2019-1-58-62.
  16. 16.
    A. I. Belous, M. K. Merdanov, and S. V. Shvedov, Microwave Electronics in Radar and Telecommunications Systems: Techn. Encyclop., Tekhnosfera, Moscow (2016), Vol. 2.Google Scholar
  17. 17.
    A. Ya. Kosoy, V. V. Asessorov, and V. A. Kozhevnikov, “Trends in the development of high-power microwave transistors for use in radio transmission, television, and communications equipment,” Elektron. Prom., No. 4–5, 78–80 (1994).Google Scholar
  18. 18.
    A. L. Khvalin, “Modeling 2T937 bipolar transistors based on experimental static and frequency characteristics,” Izmer. Tekhn., No. 8, 65–68 (2018), DOI:  https://doi.org/10.32446/0368-1025it-2018-8-65-68.

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.NPP AlmazSaratovRussia
  2. 2.Saratov State UniversitySaratovRussia

Personalised recommendations