Get 86–2017: State Primary Standard of Units of Radiometric Quantities and Units of Spectroradiometric Quantities in the Range of Wavelengths from 0.2 to 25.0 μm
The composition and metrological characteristics of GET 86–2017, the State Primary Standard of the units of radiometric quantities and units of spectroradiometric quantities in the range of wavelengths from 0.2 to 25.0 μm, are presented. The technical characteristics and operating principles of four new plants which were introduced as components of the standard to increase the precision of reproduction and transmission of the unit of spectral density of radiance, unit of spectral density of radiant intensity, and unit of spectral density of irradiance, as well as for the purpose of reproduction and transmission of the unit of the spectral density of the total radiation flux, unit of irradiance, unit of radiance of monochromatic radiation, and unit of spectral density of the radiation flux of the excitation and emission of fluorescence are described.
Keywordsthermodynamic temperature high-temperature datum point radiance irradiance spectral density of radiance spectral density of irradiance spectral density of radiant intensity spectral density of total radiation flux
The present study was completed with the use of equipment of the Center for collective use of high-precision measurement technologies in the field of photonics created on the base of VNIIOFI and supported by the Ministry of Education and Science of Russia within the framework of Agreement No. 14.595.21.0003 of 08.28.2017 (unique identifier RFMEFI59517X00003).
- 1.V. I. Sapritskii et al., “State Primary Radiometric Standard,” Izmer. Tekhn., No. 11, 3–6 (1990).Google Scholar
- 2.GOST 8.195–2013, GSI. State Verification Chain for Instruments for Measurement of the Spectral Density of Radiance, Spectral Density of Radiant Intensity, Spectral Density of Irradiance, Radiant Intensity and Irradiance in the Range of Wavelengths from 0.2 to 25.0 μm.Google Scholar
- 3.B. B. Klevnoy, V. R. Gavrilov, Ye. A. Ivashin, et al., “Measurement of the thermodynamic temperature of high-temperature datum points,” Izmer. Tekhn., No. 4, 53–57 (2013).Google Scholar
- 4.E. R. Woolliams, K. E. Anhalt, et al., “Thermodynamic temperature assignment to the point of inflection of the melting curve of high-temperature fixed points,” Philos. Trans. Royal Soc. A, 374, Iss. 2064, 20150044 (2016), https://doi.org/10.1098/rsta.2015.0044.
- 5.V. R. Gavrilov, A. Yu. Dunaev, B. E. Lisyanskii, et al., “GET 213–2014: State Primary Standard of magnitudes of absolute and relative spectral sensitivity in the range of wavelengths from 0.25 to 14.00 μm,” Izmer. Tekhn., No. 11, 15–18 (2015).Google Scholar