Advertisement

Measurement Techniques

, Volume 61, Issue 9, pp 941–943 | Cite as

Pulsed High-Voltage Sensor with Nanosecond Transient Response Rise Time

  • K. Yu. Sakharov
  • M. Yu. Denisov
  • V. L. Ugolev
  • R. A. Rodin
Article
  • 4 Downloads

A capacitive sensor for measuring the amplitude and time parameters of high voltage pulses in the 5–300 kV range is developed. The rise time of the transient response is 1.5 ns and the decay time is 170 μs. The standard measurement uncertainty for the amplitude of the voltage pulses with this sensor is found to be 2.9% by calibration.

Keywords

high voltage sensor nanosecond 

References

  1. 1.
    J.-H. Ryu, H.-O. Kwon, S.-H. Park, and D.-W. Yim, “A square patch capacitive voltage divider for measuring high-voltage ultrawideband pulses in a coaxial pulse forming line,” IEEE Trans. Instrum. Meas., 65, No. 3, 680–684 (2016).CrossRefGoogle Scholar
  2. 2.
    T. Huiskamp, F. Beckers, E. van Heesch, and A. Pemen, “B-Dot and D-Dot sensors for (sub)nanosecond high-voltage and high-current pulse measurements,” IEEE Sensors J., 16, No. 10, 3792–3801 ( 2016).Google Scholar
  3. 3.
    V. I. Kravchenko, Lightning Protection for Electronics: Handbook, Radio i Svyaz, Moscow (1991).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • K. Yu. Sakharov
    • 1
  • M. Yu. Denisov
    • 1
  • V. L. Ugolev
    • 1
  • R. A. Rodin
    • 1
  1. 1.All-Russia Research Institute of Optophysical Measurements (VNIIOFI)MoscowRussia

Personalised recommendations