Advertisement

Measurement Techniques

, Volume 61, Issue 8, pp 812–816 | Cite as

Measuring and Primary Processing of Signals of a Sensor of Magnetic Induction in the Working Zone of an Electromechanical System

  • А. N. Andreev
  • D. А. Kolesnichenko
  • N. М. Kolesnichenko
Article
  • 4 Downloads

We consider various versions of the digital processing of signals of solid-state sensors of magnetic induction located in the working areas of electromechanical transducers. The obtained results can be used for the solution of the problems of control and engineering diagnostics.

Keywords

induction working zone of the electric machine digital signal processing 

References

  1. 1.
    A. N. Andreev, M. A. Andreev, D. A. Kolesnichenko, and A. P. Shatkov, “Direct regulation of the moment in an asynchronous electric drive on the basis of the data of measurements of magnetic induction in the air gap,” Sist. Upravl. Inform. Tekhnol., No. 2 (68), 78–81 (2017).Google Scholar
  2. 2.
    D. A. Kolesnichenko, A. S. Elyukov, and S. N. Sheibukhov, “High-speed system for the protection and diagnostics of asynchronous electric motors,” in: Proc. 7th Int. Sci.-Eng. Conf. Automation and Energy Saving in the Machine-Building and Metallurgical Production, Technology and Reliability of Machines, Instruments, and Equipment, Vologda State Technical University, Vologda (2012), pp. 186–188.Google Scholar
  3. 3.
    E. N. Biryukov and E. V. Ershov, “Automation of monitoring of the technical state of units of the metallurgical industry,” Proizv. Prokata, No. 2, 35–40 (2008).Google Scholar
  4. 4.
    L. G. Sidel’nikov and D. O. Afanas’ev, “Survey of the methods of control of the technical state of asynchronous motors in the process of operation,” Vestn. Perm. Nats. Issled. Politekhn. Univ., Geolog. Neftegaz. Delo, No. 7, 127–137 (2013).Google Scholar
  5. 5.
    I. V. Pakholkov, E. V. Ershov, and A. M. Voronov, “Methods of filtering of values in a data collection system,” Proc. 12th Int. Sci.-Eng, Conf. Automation and Energy Saving in Machine-Building and Metallurgical Production, Technology and Reliability of Machines, Instruments, and Equipment, Vologda State Technical University, Vologda (2017), pp. 180–183.Google Scholar
  6. 6.
    A. M. Vodovozov and A. S. Elyukov, “Identification of the parameters of an asynchronous machine in stationary modes, ” Vestn. IGEU, No. 2, 69–71 (2010).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • А. N. Andreev
    • 1
  • D. А. Kolesnichenko
    • 1
  • N. М. Kolesnichenko
    • 1
  1. 1.Vologda State UniversityVologdaRussia

Personalised recommendations