Advertisement

Measurement Techniques

, Volume 59, Issue 3, pp 247–251 | Cite as

Development of a Standard System for Metrological Assurance of Measurements of the Pressure of Saturated Vapors of Petroleum and Petroleum Products

  • O. S. VitkovskiiEmail author
  • M. Ya. MarusinaEmail author
Article

Results from the development of a standard system that implements a new method for measuring the pressure of vapors of saturated petroleum and petroleum products are presented. The characteristics of reference materials certified on the system are presented. The advantages of the system as compared to foreign analogs are evaluated, and the prospect for automation and approval of the system as a working standard is demonstrated.

Keywords

standard pressure of saturated vapors petroleum products analyzers certified reference materials 

References

  1. 1.
    GOST 1756–2000, Petroleum Products. Determination of the Pressure of Saturated Vapors.Google Scholar
  2. 2.
    V. N. Gorobey, Yu. G. Zakharenko, M. Ya. Marusina, and V. S. Snegov, State Primary Standards of the Units of Physical Quantities, St. Petersburg State University ITMO, St. Petersburg (2011).Google Scholar
  3. 3.
    M. Ya. Marusina, B. A. Bazarov, M. P. Marusin, et al., “Magnetic system based on permanent magnets for a flowmeter of multiphase flowing media,” Izmer. Tekhn., No. 4, 62–65 (2014).Google Scholar
  4. 4.
    M. Ya. Marusina, B. A. Bazarov, M. P. Marusin, et al., “Design of a gradient system of a multiphase flowmeter,” Izmer. Tekhn., No. 5, 68–72 (2014).Google Scholar
  5. 5.
    ISO 3007–71, Petroleum and Petroleum Products. Determination of the Pressure of Saturated Vapors.Google Scholar
  6. 6.
    V. N. Gorobey, M. P. Krutovskii, and O. S. Vitkovskii, “Methods and means for the measurement of the pressure of saturated vapors of petroleum products,” Izmer. Tekhn., No. 3, 42–45 (2006).Google Scholar
  7. 7.
    O. S. Vitkovskii and N. R. Nikolaeva, “Analyzers of the pressure of saturated vapors of petroleum products,” Prib. Sreds. Avtomatiz., No. 8, 45–49 (2010).Google Scholar
  8. 8.
    ASTM D6377, Standard Method of Determining the Pressure of Vapors of Crude Petroleum: VPCRx Indicators (method of expansion).Google Scholar
  9. 9.
    ASTM D6378, Standard Method of Determining the Pressure of Vapors of Vapors (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Blends (method of triple expansion).Google Scholar
  10. 10.
    EN ISO 13016-1–2001, Liquid Petroleum Products. Determination of the Pressure of Saturated Vapors. Part 1. Determination of the Pressure of Air-Saturated Vapors (ASVP).Google Scholar
  11. 11.
    ASTM D323, Standard Test Method for Vapors Pressure of Petroleum Products (Reid method). Google Scholar
  12. 12.
    ASTM D4953, Standard Test Method for Vapors Pressure of Gasoline and Gasoline-Oxygenate Blends (dry method).Google Scholar
  13. 13.
    ASTM D6378, Standard Test Method for Vapors Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (triple expansion method). Google Scholar
  14. 14.
    ASTM D5191, Standard Test Method for Vapors Pressure of Petroleum Products (mini method). Google Scholar
  15. 15.
    GOST 9965–76, Petroleum for Petroleum Refi ning Enterprises. Technical Conditions.Google Scholar

Copyright information

© Springer Science+Business Media New York 2016

Authors and Affiliations

  1. 1.Mendeleev All-Russia Research Institute of Metrology (VNIIM)St. PetersburgRussia
  2. 2.St. Petersburg National Research University of Information Technologies, Mechanics, and Optics (ITMO)St. PetersburgRussia

Personalised recommendations