Measurement Techniques

, Volume 53, Issue 11, pp 1222–1225 | Cite as

Metrological assurance of measurements of geometric parameters of articles by means of nondestructive testing

Article
First Online:
Received:
  • 27 Downloads

The basic results of studies carried out at the All-Russia Research Institute of Metrological Service in the area of metrological assurance of measurements of the thickness of coatings and sheet materials, wear of wire rope, and the parameters of defects are presented.

Key words

standard sample gauge sample of artificial defect nondestructive testing 
This is a preview of subscription content, log in to check access.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    L. S. Babadzhanov and M. L. Babadzhanova, Metrological Assurance of Measurements of the Thickness of Coatings. Theory and Applicationts [in Russian], Izd. Standartov, Moscow (2004).Google Scholar
  2. 2.
    L. S. Babadzhanov and M. L. Babadzhanova, Patent 2307316 RF, “Set of gauges for the measurement of the thickness of coatings for use in testing magnetic thickness gauges,” Izobr. Polez. Modeli, No. 27 (2007).Google Scholar
  3. 3.
    L. S. Babadzhanov and M. L. Babadzhanova, Patent 2392581 RF, “A method of fabrication of coating thickness gauges,” Izobr. Polez. Modeli, No. 17 (2010).Google Scholar
  4. 4.
    MI 1903–97, State System of Assurance of the Uniformity of Measurements. Standards of Coating Thickness. Inspection Techniques [in Russian].Google Scholar
  5. 5.
    R 50.2.006–2000, State System of Assurance of the Uniformity of Measurements. State Accuracy Chart for Instruments for the Measurement of the Thickness of Coatings in the Range from 1 to 20000 μm.Google Scholar
  6. 6.
    ISO 8785–1999, Geometric Characteristics of Articles (GPS). Surface Defects. Terms, Definitions, and Parameters [in Russian].Google Scholar
  7. 7.
    V. V. Klyueva (ed.), Nondestructive Testing: A Handbook [in Russian], Mashinostroenie, Moscow (2003).Google Scholar
  8. 8.
    L. S. Babadzhanov and M. L. Babadzhanova, Gauges and Samples in the Area of Nondestructive Testing [in Russian], FGUP STANDART-INFORM, Moscow (2007).Google Scholar
  9. 9.
    L. S. Babadzhanov, “Unified measurement of defect geometrical parameters by the use of nondestructive testing,” Izmer. Tekhn., No. 5, 15–19 (2009); Measur. Techn., 52, No. 5, 459–464 (2009).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2011

Authors and Affiliations

  1. 1.All-Russia Research Institute of Metrological Service (VNIIMS)MoscowRussia

Personalised recommendations