Advertisement

Metallurgist

, Volume 63, Issue 5–6, pp 658–664 | Cite as

Development of a Method for the Visualization of the Process of Forming of Curved Profiles in the Software Used for the Numerical Analyses of the Roll Passes

  • V. A. OsadchiiEmail author
  • S. M. Gorbatyuk
  • D. I. Filippov
  • N. S. Kuprienko
Article
  • 8 Downloads

We propose a method for the visualization of the process of bending in the developed computer-aided system aimed at the design of equipment and tools used in manufacturing of bent profiles. The necessity of development of a special program for the numerical analyses of the profiling equipment of the rolls of roll-bending units is demonstrated. We present the description of the conditions of working with the proposed software and its functionality and discuss the method for the numerical analyses of changes in the geometry of the blanks. The displacements of reference points of the blanks in the production of arbitrary profiles according to the chosen flow diagram is analyzed. We also present graphic results of the numerical analyses of the profiling equipment for an arbitrary profile illustrating the possibilities of the program.

Keywords

rolling calibration bent profile computer-aided design 

References

  1. 1.
    A. V. Filimonov and S. V. Filimonov, Production of Semiclosed Bent Profiles by the Method of Intense Deformation [in Russian], Ul’anovsk, Ul’anovsk State Technical University (2010).Google Scholar
  2. 2.
    V. A. Osadchii, S. M. Gorbatyuk, D. I. Filippov, and N. S. Kuprienko, “CAD systems for roll-forming equipment and tools: development outlook,” Metallurg, No. 11, 28–30 (2016); English translation:Metallurgist,60, No. 11–12, 1130–1134 (2017).CrossRefGoogle Scholar
  3. 3.
    I. S. Trishevskii and M. E. Doktorov, Theoretical Fundamentals of the Process of Profiling [in Russian], Metallurgiya, Moscow (1980).Google Scholar
  4. 4.
    S. M. Gorbatyuk, V. A. Osadchii, and E. Z. Tuktarov, “Calculation of the geometric parameters of rotary rolling by using the automated design system Autodesk inventor,” Metallurgist,55, No. 7–8, 543–546 (2011).CrossRefGoogle Scholar
  5. 5.
    S. M. Gorbatyuk and A. V. Kochanov, “Method and equipment for mechanical strengthening the surface of rolling-mill rolls,” Metallurgist,56, No. 3–4, 279–283 (2012).CrossRefGoogle Scholar
  6. 6.
    S. M. Gorbatyuk and L. V. Sedykh, “Improving the durability of rolling-mill rolls,” Metallurgist,54, No. 5–6, 299–301 (2010).CrossRefGoogle Scholar
  7. 7.
    I. S. Trishevskii, V. I. Miroshnichenko, V. P. Stukalov, et al., Calibration of Rolls for the Production of Bent Profiles [in Russian], Tekhnika, Kiev (1980).Google Scholar
  8. 8.
    I. S. Trishevskii, A. B. Yurchenko, V. S. Mar’in, et al., Production of Bent Profiles. Equipment and Technology [in Russian], Metallurgiya, Moscow (1982).Google Scholar
  9. 9.
    A. P. Chekmarev and V. B. Kaluzhskii, Bent Rolled Profiles [in Russian], Metallurgiya, Moscow (1974).Google Scholar
  10. 10.
    H. Yang, H. Li, Z. Zhang, et al., “Advances and trends on tube bending forming technologies,” Chinese J. Aeronaut.,25, 1–12 (2012).CrossRefGoogle Scholar
  11. 11.
    B. V. Karpov, M. M. Skripalenko, and S. P. Galkin, “Studying the nonstationary stages of screw rolling of billets with profiled ends,” Metallurgist,61, No. 3-4, 257–264 (2017).CrossRefGoogle Scholar
  12. 12.
    M. M. Skripalenko, V. E. Bazhenov, B. A. Romantsev, et al., “Mannesmann piercing of ingots by plugs of different shapes,” Mater. Sci. Technol.,32, No. 16, 1712–1720 (2016).CrossRefGoogle Scholar
  13. 13.
    M. M. Skripalenko, D. A. Ashikhmin, M. N. Skripalenko, et al., “Use of the software deform 2D to model the process of rolling with vibration of the top work roll,” Metallurgist,56, No. 11-12, 844–847 (2013).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • V. A. Osadchii
    • 1
    Email author
  • S. M. Gorbatyuk
    • 1
  • D. I. Filippov
    • 1
  • N. S. Kuprienko
    • 1
  1. 1.National “MISiS” National Research Technological UniversityMoscowRussia

Personalised recommendations