Metallurgist

, Volume 57, Issue 9–10, pp 904–910 | Cite as

Method of Calculating the Speed Regime for Continuous Pipe Rolling

Article
First Online:
Received:

A method is proposed for calculating the speed regime in the continuous longitudinal rolling of pipes on a long mandrel. The calculations are performed with allowance for the effect of the parameters of the roll-pass design on the regime. Specific calculations are presented as examples.

Keywords

pipes continuous mill longitudinal rolling long floating mandrel speed regime 
This is a preview of subscription content, log in to check access.

References

  1. 1.
    Yu. M. Matveev and Ya. L. Vatkin, Design of the Rolls and Mandrel of Pipe Mills [in Russian], Metallurgizdat, Moscow (1951).Google Scholar
  2. 2.
    F. A. Danilov, A. Z. Balakin, and V. G. Gleiberg, Hot Rolling and Extrusion of Pipes [in Russian], 3rd ed., Metallurgiya, Moscow (1970).Google Scholar
  3. 3.
    Yu. M. Matveev and Ya. L. Vatkin, Design of the Mandrel of Pipe Mills [in Russian], 2nd ed., Metallurgiya, Moscow (1970).Google Scholar
  4. 4.
    A. P. Chekmarev and Ya. L. Vatkin, Principles of Pipe-Rolling in Circular Passes [in Russian], Metallurgizdat, Moscow (1962).Google Scholar
  5. 5.
    Yu. G. Gulyaev, E. I. Shifrin, N. A. Maksimova-Gulyaeva, et al., “Method of calculating the speed regime for the continuous longitudinal rolling of pipes on a long mandrel,” Teor. Prakt. Metallurgii, No. 3–4, 53–57 (2010).Google Scholar
  6. 6.
    Yu. G. Gulyaev, E. I. Shifrin, D. Yu. Garmashev, et al., “Method of calculating the speed regime in the continuous longitudinal rolling of pipes on a long floating mandrel,” Metallurg. Gornorud. Prom., No. 7, 134–136 (2011).Google Scholar
  7. 7.
    A. A. Shevchenko and I. A. Chekmarev, “Elements of a theory of pipe-rolling in a continuous mill on a long floating mandrel,” Tr. UkrNITI (1959), Iss. 1, pp. 76–96.Google Scholar
  8. 8.
    A. A. Shevchenko and I. A. Chekmarev, “Parameters of the rolling of pipes on a continuous mill with a long mandrel and a group drive,” in: Technical Progress in the Pipe industry [in Russian], Metallurgiya, Moscow (1965), pp. 173–185.Google Scholar
  9. 9.
    Ya. L. Vatkin, P. L. Klimenko, I. A. Chekmarev, and V. M. Druyan, “Unit frictional forces and the neutral section in the rolling of pipes on a long mandrel,” in: Obrab. Met. Davleniem: Collection, Metallurgiya, Moscow (1967), Iss. LIII, pp. 78–81.Google Scholar

Copyright information

© Springer Science+Business Media New York 2014

Authors and Affiliations

  1. 1.National Metallurgical Academy of UkraineResearch Institute of the INTERPAIP NTZDnepropetrovskUkraine
  2. 2.Trubnaya Metallurgicheskaya KompaniyaMoscowRussia

Personalised recommendations