Materials Science

, Volume 54, Issue 6, pp 803–809 | Cite as

Effect of Alloying on the Nature of Eutectic Carbides in High-Speed Steels

  • А. А. GlotkaEmail author
  • A. N. Moroz

We studied the nature of formation of eutectic carbides in economically alloyed high-speed steels after additional introduction of niobium and titanium. We analyzed the changes in the chemical composition of the matrix and carbides depending on the stages of heat treatment. It is shown that their operating properties are on a satisfactory level. The experimental steel is recommended as a substitute for the classical R6M5 steel.


eutectic carbides high-speed economically alloyed steel heat treatment titanium niobium microstructure 


  1. 1.
    E. Gudremont, Special Steels [Russian translation], Metallurgiya, Moscow (1966).Google Scholar
  2. 2.
    Yu. A. Geller, Tool Steels [in Russian], Metallurgiya, Moscow (1975).Google Scholar
  3. 3.
    A. S. Chaus, “Modification of cast tungsten-molybdenum high-speed steels with niobium, zirconium, and titanium,” Metalloved. Termoobrab. Met., No. 6, 16–21 (2005).Google Scholar
  4. 4.
    A. Yulmaz, “Microstructural analysis of a new cast high-speed steel alloyed with niobium,” Metalloved. Termoobrab. Met., No. 7, 28–32 (2012).Google Scholar
  5. 5.
    V. М. Perekhov, V. Т. Zubkova, Yu. F. Ternovyi, A. O. Sedov, and А. А. Кononenko, Powder Tool Steel with High Heat Resistance [in Ukrainian], МPC (2006)C22C 1/05 (2006.01)C22C 1/04 (2006.01)C22C 38/00, Patent No. 47165 A of Ukraine, Publ. 17.06.2002, Bull. No. 6.Google Scholar
  6. 6.
    І. М. Bilonyk and O. E. Kapustyan, Tool Steel [in Ukrainian], МPCC22C 38/50 (2006.01)C22C 38/28 (2006.01), Patent No. 60590 of Ukraine, Publ. 25.06.2011, Bull. No. 12.Google Scholar
  7. 7.
    A. A. Glotka, Development and Analysis of the Structural-Phase State of Ni–W and Fe–W Alloys Based on W–Ni–Fe Refractory Scrap and Aimed at Alloying of Special Materials in Gas-Turbine Production [in Russian], Candidate-Degree Thesis (Engineering), Zaporizhzhya (2011).Google Scholar
  8. 8.
    G. A. Kolobov and V. S. Panov, “New technologies of reprocessing of the wastes of tungsten and hard alloys,” Metallurgiya. Nauch. Trudy Zaporizhzhya Gos. Inzh. Akad., No. 1, 64–72 (2013).Google Scholar
  9. 9.
    L. D. Moshkevich, S. I. Tishaev, N. E. Evlampieva, and A. N. Kurasov, “Regularities of the formation of eutectic carbides in high-speed steels,” Stal’, No. 10, 62–67 (1982).Google Scholar
  10. 10.
    O. I. Balyts’kyi, M. R. Havrylyuk, V. V. Kochubei, and Ya. Elias, “Influence of the thermal resistance of liquid coolants on the machining of 12Kh18АG18SH steel,” Fiz.-Khim. Mekh. Mater.,52, No. 2, 54–60 (2016); English translation:Mater. Sci.,52, No. 2, 200–208 (2016).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Zaporizhzhya National Technical UniversityZaporizhzhyaUkraine

Personalised recommendations