Advertisement

Materials Science

, Volume 54, Issue 6, pp 796–802 | Cite as

Influence of the Modes of Ion Nitriding on the Fretting-Fatigue of 40Kh Steel

  • P. V. KaplunEmail author
  • V. A. Honchar
Article
  • 3 Downloads

We present the results of experimental investigation of the fretting-fatigue with bending for 40Kh steel after ion nitriding in hydrogen-free and hydrogen-containing media. The optimal mode of ion nitriding in hydrogen-free media is determined according to the criterion of maximum service life of 40Kh steel under the conditions of fretting-fatigue. We also establish the effect of hydrogen on steel after nitriding in hydrogen-containing medium.

Keywords

fretting-fatigue with bending ion nitriding service life hydrogen-free medium hydrogencontaining medium 

References

  1. 1.
    S. H. Kostohryz, Yu. I. Shalapko, and A. L. Hanzyuk, “Theoretical aspects of the application of fusible alloys for the suppression of fretting-corrosion,” Visn. Tekhnol. Univ. Podillya, No. 4, Part 2, 80–83 (1998).Google Scholar
  2. 2.
    A. G. Kuz’menko, P. V. Kaplun, and Yu. I. Shalapko, “Fretting-fatigue of 45Kh steel with diffusion coatings,” Probl. Tribol., No. 2, 16–20 (2000).Google Scholar
  3. 3.
    Y. I. Shalapko and V. G. Kaplun, “Fretting-wear of constructional steel 1045 after laser modification of surface,” Appl. Mech. Eng.,7, 425–431 (2002).Google Scholar
  4. 4.
    Yu. I. Shalapko, V. G. Kaplun, and V. A. Gonchar, “Laser treatment of electric-spark coatings aimed at guaranteeing their fretting stability,” Vestn. Dvigatelestr., No. 1, 135–140 (2002).Google Scholar
  5. 5.
    V. V. Shevelya and G. S. Kalda, Fretting-Fatigue of Metals [in Russian], Podillya, Khmel’nitskii (1998).Google Scholar
  6. 6.
    N. L. Golego, A. Ya. Alyab’ev, and V. V. Shevelya, Fretting-Corrosion of Metals [in Russian], Tekhnika, Kiev (1974).Google Scholar
  7. 7.
    V. I. Pokhmurskii, Corrosion-Fatigue Strength of Steels and the Methods for Its Enhancement [in Russian], Naukova Dumka, Kiev (1974).Google Scholar
  8. 8.
    R. B. Waterhouse, Fretting Corrosion, Pergamon, Oxford (1972).Google Scholar
  9. 9.
    G. N. Filimonov and L. T. Balatskii, Fretting in the Joints of Marine Components [in Russian], Sudostroenie, Leningrad (1973).Google Scholar
  10. 10.
    A. N. Petukhov and B. F. Balashov, “Methods for increasing the fatigue strength of the components under the conditions of frettingcorrosion,” Vestn. Mashinostr., No. 6, 17–19 (1974).Google Scholar
  11. 11.
    V. I. Pokhmurskii, Corrosion Fatigue of Metals [in Russian], Metallurgiya, Moscow (1985).Google Scholar
  12. 12.
    N. L. Golego, V. P. Onoprienko, M. N. Rozhkov, and A. L. Gaidarenko, “On the mechanical factor in fretting corrosion,” Tren. Iznos,4, No. 4, 581–585 (1983).Google Scholar
  13. 13.
    N. S. Kulagin, A. I. Dukhota, and V. L. Svechnikov, “Fractographic features and diagnostic signs of fatigue fracture surfaces caused by fretting,” in: Promising Methods of the Restoration of Parts and Units in the Aeronautical Engineering [in Russian], KIIGA, Kiev (1989), pp. 24–28.Google Scholar
  14. 14.
    A. I. Dukhota, M. V. Kindrachuk, and V. F. Labunets, “Influence of fretting-corrosion on the fatigue strength of titanium alloys,” in: Works 13th Internat. Colloq. “Mechanical Fatigue of Metals” MFM-2006 (Sept. 25–28, 2006), TDTU, (2006), pp. 243–250.Google Scholar
  15. 15.
    V. I. Pokhmurs’kyi and M. S. Khoma, Corrosion Fatigue of Metals and Alloys [in Ukrainian], SPOLOM, Lviv (2008).Google Scholar
  16. 16.
    V. G. Kaplun and P. V. Kaplun, Ion Nitriding in Hydrogen-Free Media [in Russian], KhNU, Khmel’nitskii (2015).Google Scholar
  17. 17.
    P. V. Kaplun, “Influence of hydrogen on the ion nitriding of steels,” Fiz.-Khim. Mekh. Mater.,53, No. 6, 68–72 (2017); English translation:Mater. Sci.,53, No. 6, 818–822 (2018).CrossRefGoogle Scholar
  18. 18.
    P. V. Kaplun and V. A. Honchar, “Low-cycle fatigue of steels after ion nitriding in hydrogen-free atmospheres,” Fiz.-Khim. Mekh. Mater.,52, No. 3, 95–98 (2016); English translation:Mater. Sci.,52, No. 3, 402–406 (2016).CrossRefGoogle Scholar
  19. 19.
    V. M. Fedirko and I. M. Pohrelyuk, Nitriding of Titanium and Its Alloys [in Ukrainian], Naukova Dumka, Kyiv (1996).Google Scholar
  20. 20.
    О. І. Balyts’kyi, V. М. Mochul’s’kyi, and L. M. Ivas’kevych, “Evaluation of the influence of hydrogen on the mechanical characteristics of complexly alloyed nickel alloys,” Fiz.-Khim. Mekh. Mater.,51, No. 4, 91–100 (2015); English translation:Mater. Sci.,51, No. 4, 538–547 (2016).Google Scholar
  21. 21.
    O. I. Balyts’kyi, J. Chmiel, P. Krause, J. Niekrasz, and M. Maciag, “Role of hydrogen in the cavitation fracture of 45 steel in lubricating media,” Fiz.-Khim Mekh. Mater.,45, No. 5, 39–42 (2009); English translation:Mater. Sci.,45, No. 5, 651–654 (2009).CrossRefGoogle Scholar
  22. 22.
    A. V. Prokopenko and V. N. Torgov, “Procedure of fatigue testing of the compressor blades of gas-turbine engines in corrosive media,” Probl. Prochn., No. 4, 107–109 (1980).Google Scholar
  23. 23.
    G. I. Krasovskii and G. F. Filaretov, Design of Experiments [in Russian], Izd. BGU, Minsk (1982).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Khmel’nyts’kyi National UniversityKhmel’nyts’kyiUkraine

Personalised recommendations