Advertisement

Journal of Thermal Analysis and Calorimetry

, Volume 134, Issue 3, pp 2017–2027 | Cite as

Alkyd hybrid coatings for electrical rotating machines

  • Alina Ruxandra Caramitu
  • Marius Bumbac
  • Cristina Mihaela Nicolescu
  • Traian Zaharescu
Article
  • 22 Downloads

Abstract

Alkyd hybrid systems containing antioxidants (IRGANOX 1010, IRGANOX 1076, and SANTONOX R), titania and alumina were subjected to thermal and radiation degradation for their application in the electrical engineering. For the characterization of thermal stability of hybrid compositions, crystallinity evolution in nanostructured organic polymers, and structure changes, due to different thermal treatment isothermal and nonisothermal chemiluminescence, X-ray diffraction, infrared absorption spectroscopy with Fourier transforming infrared spectrometer and Raman spectroscopy were, respectively, used. It was found that the oxidation protector IRGANOX 1010 and TiO2 filler increased the thermal stability proved by chemiluminescence. The long-term heating characterized by temperature index demonstrated that the modified alkyd–melamine–epoxy resin is a suitable treatment for polyester laminates used in the electrical rotating machines. The superior thermal performances of cured polyester laminates were also demonstrated by the evaluation of swelling degree that is placed at half or lower values in modified materials than in neat resin. The interaction between formulation components is revealed by the improvement of thermal strength whose level is increased due to the cage effects promoted by additive and filler.

Keywords

Alkyd resin Hybrid compositions Stabilization Thermal degradation Radiation accelerated ageing 

Notes

Acknowledgements

This study was accomplished in the frame of research and development project PN-II-PT-PCCA-2013-4-0792 “High performance polymeric insulations for electrical rotation machines. Technology and modeling approaches (IsMach)” funded by the Ministry of Education, Research and Sport.

References

  1. 1.
    Sharmin E, Zahar F, Nishat N, Ahmad S. Chapter 8: Recent advances in environment-friendly alkyd nanocomposites toward “greener” coatings. In: Larramendy LM, Soloneski S, editors. Green nanotechnology. London: InTech; 2016.  https://doi.org/10.5772/61432.CrossRefGoogle Scholar
  2. 2.
    Kurt I, Acar I, Güçlü AG. Preparation and characterization of water reducible alkyd resin/colloidal silica nanocomposite coatings. Prog Org Coat. 2014;77:949–56.  https://doi.org/10.1016/j.porgcoat.2014.01.017.CrossRefGoogle Scholar
  3. 3.
    Devab MA. Effect of carbon nano-tubes on the corrosion resistance of alkyd coating immersed in sodium chloride solution. Prog Org Coat. 2015;85:146–50.  https://doi.org/10.1016/j.porgcoat.2015.04.003.CrossRefGoogle Scholar
  4. 4.
    Li J, Ecco L, Fedel M, Ermini V, Delmas G, Pana JS. In situ AFM and EIS study of a solvent borne alkyd coating with nanoclay for corrosion protection of carbon steel. Prog Org Coat. 2015;87:179–88.  https://doi.org/10.1016/j.porgcoat.2015.06.003.CrossRefGoogle Scholar
  5. 5.
    Tahmaz M, Acar I, Güçlü G. Synthesis and film properties of long oil alkyd resin/organo clay nanocomposite coatings. Res Chem Intermed. 2015;41:27–42.  https://doi.org/10.1007/s11164-013-1165-5.CrossRefGoogle Scholar
  6. 6.
    Bal A, Acar I, Güçlü G. Thermal oxidative degradation kinetics of nanocomposite alkyd-melamine formaldehyde resin containing modified silica. Instrum Sci Technol. 2014;43:345–56.  https://doi.org/10.1080/10739149.2013.867504.CrossRefGoogle Scholar
  7. 7.
    Murillo EA, López BL. Novel waterborne hyperbranched acylated-maleinized alkyd resins. Prog Org Coat. 2011;72:731–8.  https://doi.org/10.1016/j.porgcoat.2011.08.004.CrossRefGoogle Scholar
  8. 8.
    Elrebii M, Boufi S. Surfactant-free waterborn hybrid alkyd-acrylic dispersion: synthesis, properties and long term stability. J Ind Eng Chem. 2014;20:3631–8.  https://doi.org/10.1016/j.jiec.2013.12.058.CrossRefGoogle Scholar
  9. 9.
    Cygan P, Laghari JR. Models for insulation ageing under electrical and thermal multistress. IEEE Trans Electr Insul. 1990;EI-25:923–34.  https://doi.org/10.1109/14.59867.CrossRefGoogle Scholar
  10. 10.
    Caramitu AR, Zaharescu T, Mitrea S, Borbath I. Qualification of ecological alkyd lacquer for metallic surface protection in nuclear engineering. Rev Chim (Bucharest). 2013;64:1468–70.Google Scholar
  11. 11.
    Bumbac M, Zaharescu T, Nicolescu CM. Thermal and radiation stability of alkyd based coatings used as insulators in the electrical rotating machines. J Sci Arts. 2017;17:119–30.Google Scholar
  12. 12.
    Chauhan RC, Singh M, Singh B. Rotating machine insulation materials and techniques—an overview. Indian J Eng Mater Sci. 2000;7:370–4.Google Scholar
  13. 13.
    ASTM D2304-10. Standard test method for thermal endurance of rigid electrical insulating materials, ASTM International, Standards products, 2010.  https://doi.org/10.1520/d2304-10.
  14. 14.
    Sörensen K, Löf D. WO Patent WO2013100836A1, Alkyd resin composition comprising silica, 2013.Google Scholar
  15. 15.
    Greenwood PHJ, Lagnemo H. US Patent US9249317B2, Alkyd-based coating composition, 2016.Google Scholar
  16. 16.
    Roy M, Nelson JK, MacCrone RK, Schadler LS, Reed CW, Keefe R, Zenger W. Polymer nanocomposites dielectric—the role of the interface. IEEE TDEI. 2005;12:629–43.  https://doi.org/10.1109/TDEI.2005.1511089.CrossRefGoogle Scholar
  17. 17.
    Zhou Z, Kai L, Tao W, Xu H, Hui Q, Bing F. Rapid determination of oxidation stability for transformer oils with antioxidants. IEEE TDEI. 2012;19:1604–8.  https://doi.org/10.1109/TDEI.2012.6311506.CrossRefGoogle Scholar
  18. 18.
    International Standard IEC 60216 – 1:2013, TC 112 - Evaluation and qualification of electrical insulating materials and systems, Electrical insulating materials—Thermal endurance properties—Part 1. Ageing procedures and evaluation of test results, International Electrotechnical Commission, 2013.Google Scholar
  19. 19.
    Rychlý J, Kocer A, Tanis F, Matisová-Rychlá L, Janigová I, Csomorová K. Comparison of isothermal and non-isothermal chemiluminescence and differential scanning calorimetry experiments with benzoyl peroxide. Chem Pap. 2009;63:471–8.  https://doi.org/10.2478/s11696-009-0021-y.CrossRefGoogle Scholar
  20. 20.
    Cakić SM, Ristić IS, Jasŏ VM, Radičević RŽ, Ilić OZ, Semindić JKB. Investigation of the curing kinetics of alkyd-melamine-epoxy resin system. Prog Org Coat. 2012;73:415–24.  https://doi.org/10.1016/j.porgcoat.2011.03.016.CrossRefGoogle Scholar
  21. 21.
    Marten A, Maichel D. US Patent US6815495B2, Coating of melamine, epoxy, urethane or alkoxy resin with phenolic resin binder, 2004.Google Scholar
  22. 22.
    Sharmin E, Imo L, Ashraf SM, Ahmad S. Acrylic-melamine modified DGEBA-epoxy coatings and their anticorrosive behavior. Prog Org Coat. 2004;50:47–54.  https://doi.org/10.1016/j.porgcoat.2003.10.003.CrossRefGoogle Scholar
  23. 23.
    Radoman TS, Džunuzović JV, Trifković KT, Palija T, Marinković AD, Bugarski B, Džunuzović ES. Effect of surface modified TiO2 nanoparticles on thermal, barrier and mechanical properties of oil alkyd resin-based coatings. Express Polym Lett. 2015;9:916–31.  https://doi.org/10.3144/expresspolymlett.2015.83.CrossRefGoogle Scholar
  24. 24.
    Hearon K, Smith SE, Maher CA, Wilson TS, Maitland DJ. The effect of free radical inhibitor on the sensitized radiation crosslinking and thermal processing stabilization of polyurethane shape memory polymers. Radiat Phys Chem. 2013;83:111–21.  https://doi.org/10.1016/j.radphyschem.2012.10.007.CrossRefGoogle Scholar
  25. 25.
    Das P, Tiwari P. Thermal degradation kinetics of plastics and model selection. Thermochim Acta. 2017;654:191–202.  https://doi.org/10.1016/j.tca.2017.06.001.CrossRefGoogle Scholar
  26. 26.
    Mandal DK, Bhunia H, Bajpai PK, Bhalla VK. Thermal degradation kinetic and estimation of lifetime of radiation grafted polypropylene films. Radiat Phys Chem. 2017;136:1–8.  https://doi.org/10.1016/j.radphyschem.2017.03.036.CrossRefGoogle Scholar
  27. 27.
    Gamlin C, Dutta N, Roy-Choudhury N, Kehoe D, Matisons J. Influence of ethylene-propylene ration on the thermal degradation behavior of EPDM elastomers. Thermochim Acta. 2001;367–368:165–93.  https://doi.org/10.1016/S0040-6031(00)00668-7.CrossRefGoogle Scholar
  28. 28.
    Mariani M, Ravasio U, Varoli V, Consolati G, Faucitano A, Buttafava A. Gamma irradiation of polyester films. Radiat Phys Chem. 2007;76:1385–9.  https://doi.org/10.1016/j.radphyschem.2007.02.039.CrossRefGoogle Scholar
  29. 29.
    Peterson JT, Vyazovkin S, White CA. Kinetics of the thermal and thermo-oxidation degradation of polystyrene, polyethylene and poly(propylene). Macromol Chem Phys. 2001;202:775–84.  https://doi.org/10.1002/1521-3935(20010301)202:6%3c775:AID-MACP775%3e3.0.CO;2-G.CrossRefGoogle Scholar
  30. 30.
    Kirschweng B, Tátraaljai D, Földes E, Pugánski B. Natural antioxidants as stabilizers for polymers. Polym Degrad Stab. 2017;145:25–40.  https://doi.org/10.1016/j.polymdegradstab.2017.07.012.CrossRefGoogle Scholar
  31. 31.
    Zaharescu T, Pielikowski K. Spabilization effects of POSS nanoparticles on the gamma-irradiated polyurethane. J Therm Anal Calorim. 2016;124:767–74.  https://doi.org/10.1007/s10973-015-5191-y.CrossRefGoogle Scholar
  32. 32.
    Zaharescu T, Ilies D-C, Roşu T. Thermal and spectroscopic analysis of stabilization effect of copper complexes in EPDM. J Therm Anal Calorim. 2016;123:231–9.  https://doi.org/10.1007/s10973-015-4893-5m.CrossRefGoogle Scholar
  33. 33.
    Larkin P. Infrared and Raman spectroscopy. 1st ed. San Diego: Elsevier; 2011.Google Scholar
  34. 34.
    Anderson DG, Duffer JK, Julian JM, Scott RW, Sutliff TM, Vaikus MJ, Vandenberg JT, editors. An infrared spectroscopy atlas for the coating industry. Chicago: Infrared Spectroscopy Committee, Chicago Society for the Coating Industry; 1980.Google Scholar
  35. 35.
    Cakic SM, Ristic IS, Valdislav JM, Stamenkovic JV, Stojicovic DT. IR-change and colour changes of long-oil air drying alkyd paints as a result of UV irradiation. Prog Org Coat. 2012;73:401–8.  https://doi.org/10.1016/j.porgcoat.2010.12.002.CrossRefGoogle Scholar
  36. 36.
    Hung-Jie L, Gobalakrishnan S, Te-Chin T, Ren-Jang W, Murthy C. Preparation of nanostructured organic/inorganic polymer hybrids and their humidity sensing properties. J Taiwan Inst Chem Eng. 2011;42:868–73.  https://doi.org/10.1016/j.jtice.2011.01.001.CrossRefGoogle Scholar
  37. 37.
    Paul DR, Bucknall GB. Polymer blends. New York: Wiley; 2000.Google Scholar
  38. 38.
    Uğur Ş, Yargi Ő, Elaissari A, Pekcan Ő. Oxygen diffusion into polymer-clay composite films as a function of clay content and temperature. Macromol Symp. 2009;281:168–73.  https://doi.org/10.1002/masy.200950722.CrossRefGoogle Scholar
  39. 39.
    Barbee RB, Matayabas JC, Texler-jr JW, Piner RL. US Patent US6034163A, Polyester nanocomposites for high barrier applications, 1997.Google Scholar

Copyright information

© Akadémiai Kiadó, Budapest, Hungary 2018

Authors and Affiliations

  1. 1.National Institute for Electrical Engineering (INCDIE – ICPE CA)BucharestRomania
  2. 2.Valahia University of TargovisteTargovisteRomania

Personalised recommendations