Investigations on the structural, mechanical, thermal, and electrical properties of Ce-doped TiO2/poly(n-butyl methacrylate) nanocomposites
- 2 Downloads
This study focused on the fabrication of poly(n-butyl methacrylate) (PBMA) nanocomposites with various concentrations of cerium-doped titanium dioxide (Ce–TiO2) nanoparticles via in situ polymerization technique. The structural characterization and the material properties of all the composites were analyzed by UV–visible, FTIR, XRD, SEM, DSC, TG, and tensile strength measurements. The UV–visible and FTIR studies confirmed the effective inclusion of Ce–TiO2 nanoparticles into the PBMA matrix. The change in amorphous morphology of PBMA to a crystalline structure was observed from the XRD pattern. The SEM morphology revealed the attachment of nanoparticles in the polymer matrix. The inclusion of Ce–TiO2 nanoparticles enhanced the glass transition temperature, and thermal stability of the PBMA matrix was revealed from DSC and TG, respectively. The tensile strength of PBMA was greatly enhanced by the addition of Ce–TiO2 nanoparticles. The AC conductivity, dielectric constant, and dielectric loss studies were also performed in the frequency range 102–106 Hz, and it was observed that addition of Ce–TiO2 nanoparticles greatly enhanced the electrical properties of PBMA. The change in dielectric constant with the addition of nanoparticles was correlated with a theoretical modeling study. This work also extended to study the role of Ce–TiO2 nanoparticles in the reinforcing mechanism of the nanocomposite by comparing the actual tensile strength of the composite with different theoretical modeling. The high dielectric constant and tensile strength of composite are beneficial in designing lightweight and highly efficient nanoelectronic materials based on the family of polybutyl acrylates.
KeywordsPoly(n-butyl methacrylate) Ce–TiO2 nanoparticles Characterizations Thermal properties AC conductivity Dielectric properties Tensile strength Modeling
Compliance with ethical standards
Conflict of interest
The authors of this article have no conflict of interest to declare.
- 4.Jundale DM, Navale ST, Khuspe GD, Dalavi DS, Patil PS, Patil VB. Polyaniline–CuO hybrid nanocomposites: synthesis, structural, morphological, optical and electrical transport studies. J Mater Sci: Mater Electron. 2013;24:3526–35.Google Scholar
- 7.Ramesan MT, Santhi V. In situ synthesis, characterization, conductivity studies of polypyrrole/silver doped zinc oxide nanocomposites and their application for ammonia gas sensing. J Mater Sci: Mater Electron. 2017;28:18804–14.Google Scholar
- 16.Suhailath K, Jayakrishnan P, Naufal B, Periyat P, Jasna VC, Ramesan MT. Synthesis by in situ-free radical polymerization, characterization, and properties of poly (n-butyl methacrylate)/samarium-doped titanium dioxide nanoparticles composites. Adv Polym Technol. 2016. https://doi.org/10.1002/adv21770.Google Scholar
- 17.Ramesan MT, Sampreeth T. In situ synthesis of polyaniline/Sm-doped TiO2 nanocomposites: evaluation of structural, morphological, conductivity studies and gas sensing applications. J Mater Sci: Mater Electron. 2017;28:16181–91.Google Scholar
- 24.Yuvaraj H, Kim WS, Kim JT, Kang IP, Gal YS, Kim SW, Lim KT. Synthesis of poly(methyl methacrylate) encapsulated TiO2 nanocomposite particles in supercritical CO2. Mol Cryst Liq Cryst. 2009;514:355–65.Google Scholar