The influence of the nanofiller on thermal properties of thermoplastic polyurethane elastomers

  • Ivan Ristić
  • Ivan Krakovsky
  • Teodora Janić
  • Suzana Cakić
  • Aleksandra Miletić
  • Milovan Jotanović
  • Tanja Radusin
Article
  • 4 Downloads

Abstract

Hybrid materials based on renewable resources are under huge interest of scientist nowadays. Polymer-based hybrid materials with the addition of nanoparticles are very interesting because the addition of small amount of nanoparticles significantly improves final material’s properties. Group of polymers which is suitable for use for hybrid materials preparation are polyurethanes. Polyurethanes have wide spectra of commercial and industrial applications, but for their production petroleum-based derivative is used and big efforts are still making for changing it with components from renewable resources. Thermoplastic polyurethanes were synthesized using two types of isocyanates: isophorone diisocyanate and hexamethylene diisocyanate, and the possibility of using isosorbide, instead of butanediol, as chain extender for the synthesis of thermoplastic polyurethane elastomers was investigated. NCO/OH ratio was 1.15/1 and soft segment content 50% in all samples. Also, the influence of the addition of hydrophilic and hydrophobic silicon(IV)-oxide nanoparticles, in amounts of 0.5,1, 2, and 5%, on thermal properties of the obtained green polyurethanes is determined using DSC and TG analysis. It is shown that hydrophilic silicon(IV)-oxide nanoparticles have an influence on thermal properties of soft segment in polyurethane structure, while hydrophobic ones have the influence on hard polyurethane’s segment properties, increasing Tg values. Thermal stability of polyurethanes increased with increasing the amount of nanoparticles added. FT-IR analysis showed that there is no chemical reaction between polymer and nanoparticles.

Keywords

Polyurethanes Green materials Nanocomposites Thermal properties 

Notes

Acknowledgements

We would like to thank Ministry of Education, Science and Technological Development Republic of Serbia for funding project III45022 and Ministry of Science and Technology Republic of Srpska, Project 19/6-020/961-83/15.

References

  1. 1.
    Tanaka H, Kunimura M. Mechanical properties of thermoplastic polyurethanes containing aliphatic polycarbonate soft segments with different chemical structures. Polym Eng Sci. 2002;42:1333–49.CrossRefGoogle Scholar
  2. 2.
    Fakirov S. Handbook of condensation thermoplastic elastomers. New York: Wiley; 2005.CrossRefGoogle Scholar
  3. 3.
    Jiang X, Li J, Ding M, Tan H, Ling Q, Zhong Y, Fu Q. Synthesis and degradation of nontoxic biodegradable waterborne polyurethanes elastomer with poly(ε-caprolactone) and poly(ethylene glycol) as soft segment. Eur Polym J. 2007;43:1838–46.CrossRefGoogle Scholar
  4. 4.
    Sardon H, Pascual A, Mecerreyes D, Taton D, Cramail H. Hedrick Jl. Synthesis of polyurethanes using organocatalysis: a perspective. Macromolecules. 2015;48:3153–65.CrossRefGoogle Scholar
  5. 5.
    Lim DI, Park HS, Park JH, Knowles JC, Gong MS. Application of high-strength biodegradable polyurethanes containing different ratios of biobased isomannide and poly(ε-caprolactone) diol. J Bioact Compat Polym. 2013;28:274–88.CrossRefGoogle Scholar
  6. 6.
    Park HS, Gong MS, Knowles JC. Catalyst-free synthesis of high elongation degradable polyurethane containing varying ratios of isosorbide and polycaprolactone: physical properties and initial biocompatibility. J Mater Sci Mater Med. 2013;24:281–94.CrossRefGoogle Scholar
  7. 7.
    Oh SY, Kang MS, Knowles JC, Gong MS. Synthesis of bio-based thermoplastic polyurethane elastomers containing isosorbide and polycarbonate diol and their biocompatible properties. J Biomater Appl. 2015;30:327–37.CrossRefGoogle Scholar
  8. 8.
    Marin R, Munoz-Guerra S. Carbohydrate-based poly(ester-urethane)s: a comparative study regarding cyclic alditols extenders and polymerization procedures. J Appl Polym Sci. 2009;114:3723–36.CrossRefGoogle Scholar
  9. 9.
    Spontak RJ, Patel NP. Thermoplastic elastomers: fundamentals and applications. Curr Opin Colloid Interface Sci. 2000;5:333–40.CrossRefGoogle Scholar
  10. 10.
    Amin KNM, Amiralian N, Annamalai PK, Edwards G, Chaleat C, Martin DJ. Scalable processing of thermoplastic polyurethane nanocomposites toughened with nanocellulose. Chem Eng J. 2016;302:406–16.CrossRefGoogle Scholar
  11. 11.
    Kong X, Zhao L, Curtis JM. Polyurethane nanocomposites incorporating biobased polyols and reinforced with a low fraction of cellulose nanocrystals. Carbohydr Polym. 2016;152:487–95.CrossRefGoogle Scholar
  12. 12.
    Chavarria F, Paul DR. Morphology and properties of thermoplastic polyurethane nanocomposites: effect of organoclay structure. Polymer. 2006;47:7760–73.CrossRefGoogle Scholar
  13. 13.
    Ha Thuc CN, Cao HT, Nguyen DM, Tran MA, Duclaux L, Grillet AC, Ha Thuc H. Preparation and characterization of polyurethane nanocomposites using vietnamese montmorillonite modified by polyol surfactants. J Nanomater. 2014.  https://doi.org/10.1155/2014/302735.Google Scholar
  14. 14.
    Maji PK, Das NK, Bhowmick AK. Preparation and properties of polyurethane nanocomposites of novel architecture as advanced barrier materials. Polymer. 2010;51:1100–10.CrossRefGoogle Scholar
  15. 15.
    Dias RCM, Goes AM, Serakides R, Ayres E, Orefice RL. Porous biodegradable polyurethane nanocomposites: preparation, characterization, and biocompatibility tests. Mater Res. 2010;13:201–18.CrossRefGoogle Scholar

Copyright information

© Akadémiai Kiadó, Budapest, Hungary 2018

Authors and Affiliations

  • Ivan Ristić
    • 1
  • Ivan Krakovsky
    • 2
  • Teodora Janić
    • 1
  • Suzana Cakić
    • 3
  • Aleksandra Miletić
    • 1
  • Milovan Jotanović
    • 4
  • Tanja Radusin
    • 5
  1. 1.Faculty of TechnologyUniversity of Novi SadNovi SadSerbia
  2. 2.Faculty of Mathematics and PhysicsCharles UniversityPraha 2Czech Republic
  3. 3.Faculty of Technology LeskovacUniversity of NisLeskovacSerbia
  4. 4.Faculty of Technology ZvornikUniversity of East SarajevoZvornikBosnia and Herzegovina
  5. 5.Institute of Food Technology Novi SadUniversity of Novi SadNovi SadSerbia

Personalised recommendations