Skip to main content
SpringerLink
Log in

Thermal performance evaluation of a solar air heater with and without thermal energy storage

An experimental study

  • Published:
Journal of Thermal Analysis and Calorimetry Aims and scope Submit manuscript

Abstract

This communication presents the experimental study and performance analysis of a solar air heater with and without phase change material (PCM) viz. paraffin wax and hytherm oil. There are three different arrangements viz. without PCM, with PCM and with hytherm oil to study the comparative performance of this experimental system. Inlet, outlet temperatures and radiation with respect to time have been recorded and found that the output temperature in case with thermal energy storage (TES) is higher than that of without TES, besides, the outlet temperature with paraffin wax is slightly greater than that of with hytherm oil. Also there is no energy gain in the evening in case of without TES but in case of with TES there is a heat gain for around 4 h in the evening which gives the backup for hot air for around four more hours which is the main advantage of this systems with TES. Based on the data, the efficiency of the system has been calculated and it is noted that the efficiency in the case of heat storage is higher than that of without TES, besides the efficiency in the case of the paraffin wax is slightly higher than that of the hytherm oil case.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

Abbreviations

A :

Projected area of collector tube exposed to the sun light (m2)

C p :

Specific heat of air (J/kg K)

I s :

Intensity of solar radiation at any particular site (W/m2)

\( \dot{m} \) :

Mass flow rate of air (g/s)

Q c :

Energy incident on the collector tube (W)

Q u :

Useful energy gained from the collector

Q f :

Energy absorbed by air (W)

ΔT :

Temperature difference (K)

T i n :

Inlet temperature (K)

α :

Absorptance of inner surface of evacuated tube collector

τ :

Transmittance of the collector tube

η :

Thermal efficiency of the collector system

η htm :

Thermal efficiency with hytherm oil

η pcm :

Thermal efficiency with phase change material

η wopcm :

Thermal efficiency without phase change material

T htm :

Temperature with hytherm oil

T pcm :

Temperature with phase change material

T wopcm :

Temperature without phase change material

References

  1. Kurtbas I, Turgut E. Experimental investigation of solar air heater with free and fixed fins: efficiency and exergy loss. Int J Sci Technol. 2006;1:75–82.

    Google Scholar 

  2. Gupta MK, Kaushik SC. Exergy performance evaluation and parametric studies of solar air heater. Energy. 2008;33:1691–702.

    Article  Google Scholar 

  3. Esen H. Experimental energy and exergy analysis of a double-flow solar air heater having different obstacles on absorber plates. Build Environ. 2008;43:1046–54.

    Article  Google Scholar 

  4. Ucar A, Inallı M. Thermal and exergy analysis of solar air collectors with passive augmentation techniques. Int Commun Heat Mass Transf. 2006;33:1281–90.

    Article  Google Scholar 

  5. Ozturk HH, Demirel Y. Exergy-based performance analysis of packed-bed solar air heaters. Int J Energy Res. 2004;28:423–32.

    Article  Google Scholar 

  6. Karsli S. Performance analysis of new-design solar air collectors for drying applications. Renew Energy. 2007;32:1645–60.

    Article  CAS  Google Scholar 

  7. Chow TT. A review on photovoltaic/thermal hybrid solar technology. Appl Energy. 2010;87:365–79.

    Article  CAS  Google Scholar 

  8. Ali SY. Study and optimization of the thermal performances of the offset rectangular plate fin absorber plates with various glazing. Renew Energy. 2005;30:271–80.

    Article  Google Scholar 

  9. Torres-Reyes E, Navarrete-Gonzalez JJ, Zaleta-Aguilar A, Cervantes-de Gortari JG. Optimal process of solar to thermal energy conversion and design of irreversible flat-plate solar collectors. Energy. 2003;28:99–113.

    Article  CAS  Google Scholar 

  10. Gupta MK, Kaushik SC. Performance evaluation of solar air heater having expanded metal mesh as artificial roughness on absorber plate. Int J Therm Sci. 2009;48:1007–16.

    Article  CAS  Google Scholar 

  11. Agrawal B, Tiwari GN. Optimizing the energy and exergy of building integrated photovoltaic thermal (BIPVT) systems under cold climatic conditions. Appl Energy. 2010;87:417–26.

    Article  Google Scholar 

  12. Ozgen F, Esen M, Esen H. Experimental investigation of thermal performance of a double flow solar air heater having aluminium cans. Renew Energy. 2009;34:2391–8.

    Article  CAS  Google Scholar 

  13. Gao W, Lin W, Liu T, Xia C. Analytical and experimental studies on the thermal performance of cross corrugated and flat plate solar air heaters. Appl Energy. 2007;84:425–41.

    Article  CAS  Google Scholar 

  14. Chow TT, Pei G, Fong KF, Lin Z, Chan ALS, Ji J. Energy and exergy analysis of photovoltaic thermal collector with and without glass cover. Appl Energy. 2009;86:310–6.

    Article  Google Scholar 

  15. Tyagi VV, Buddhi D. PCM thermal storage in buildings a state of art. Renew Sustain Energy Rev. 2007;11:1146–66.

    Article  Google Scholar 

  16. Enibe SO. Performance of a natural circulation solar air heating system with phase change material energy storage. Renew Energy. 2002;27:69–86.

    Article  Google Scholar 

  17. Zhou G, Zhang Y, Zhang Q, Lin K, Di H. Performance of a hybrid heating system with thermal storage using shape-stabilized phase-change material plates. Appl Energy. 2007;84(10):1068–77.

    Article  Google Scholar 

  18. Alta D, Bilgili E, Ertekin C, Yaldiz O. Experimental investigation of three different solar air heaters: energy and exergy analyses. Appl Energy. 2010;87:2953–73.

    Article  CAS  Google Scholar 

  19. Akpinar KE, Kocyigit F. Energy and exergy analysis of a new flat-plate solar air heater having different obstacles on absorber plates. Appl Energy. 2010;87:3438–50.

    Article  Google Scholar 

  20. Sreekumar A. Techno-economic analysis of a roof-integrated solar air heating system for drying fruit and vegetables. Energy Convers Manag. 2010;51:2230–8.

    Article  Google Scholar 

  21. Omojaro AP, Aldabbagh LBY. Experimental performance of single and double pass solar air heater with fins and steel wire mesh as absorber. Appl Energy. 2010;87:3759–65.

    Article  CAS  Google Scholar 

Download references

Acknowledgements

One of the authors (V.V. Tyagi) highly acknowledge the financial assistance in the form of Research Associateship due to CSIR, New Delhi, India.

Author information

Authors and Affiliations

  1. Sardar Swaran Singh National Institute of Renewable Energy, Wadala Kalan, Kapurthala, 144601, Punjab, India

    S. K. Tyagi

  2. Centre for Energy Studies, Indian Institute of Technology, Delhi, Hauz Khas, New Delhi, 110016, India

    V. V. Tyagi & S. C. Kaushik

  3. School of Infrastructure Technology & Resource Management, Shri Mata Vaishno Devi University, Katra, 182320, Jammu & Kashmir, India

    A. K. Pandey

Authors
  1. V. V. Tyagi
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. A. K. Pandey
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. C. Kaushik
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. S. K. Tyagi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to V. V. Tyagi or S. K. Tyagi.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Tyagi, V.V., Pandey, A.K., Kaushik, S.C. et al. Thermal performance evaluation of a solar air heater with and without thermal energy storage. J Therm Anal Calorim 107, 1345–1352 (2012). https://doi.org/10.1007/s10973-011-1617-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10973-011-1617-3

Keywords

Search

Navigation