Advertisement

Synthesis of imprinted amino-functionalized mesoporous silica and their selective adsorption performance of Pb2+, Cu2+, and Zn2+

  • Hong YangEmail author
  • Jiaxi Fan
  • Huijuan Tian
  • Xiaoyu Wang
  • Weng Fu
  • Easar Alam
Original Paper: Fundamentals of sol-gel and hybrid materials processing
  • 25 Downloads

Abstract

The synthesis of imprinted amino-functionalized mesoporous silica (IAFMS) are using lead, copper, and zinc ions as imprinting species, anhydrous ethanol as a solvent, PEG-2000 as a template agent, tetramethylammonium hydroxide (TMAOH) as an auxiliary template agent, and tetraethoxysilane (TEOS) as a source of silica. The amino group was provided via the most common agent (3-aminopropyl)triethoxysilane (APTES). Based on the uniform design and response surface analysis, the optimum molar ratios of synthetic species such as APTES:heavy metal ions:TMAOH:PEG-2000:TEOS:anhydrous ethanol were determined as 0.270:0.065:0.25:0.073:1:50. Subsequently, Pb-IAFMS, Cu-IAFMS, and Zn-IAFMS were prepared with the same ratios as the above. Then, isothermal adsorption and selective adsorption of Pb(II), Cu(II), and Zn(II) were carried out. The results showed that the adsorption of heavy metal ions was mainly a chemical adsorption, the adsorbent surface was not a completely uniform adsorption, and a higher temperature was beneficial to the adsorption of heavy metal ions. Compared with qm values in the Langmuir model, the adsorption capacities of target ions onto imprinted materials can be 32.6–71.2% higher than those on the non-imprinted material. Values of relatively selective coefficients of IAFMS ranged from 4.35 to 18.45, which reveals the remarkable affinities of imprinted samples to the corresponding ions.

Highlights

  • Combining ion-imprinting and modification of amino groups into one step can successfully prepare IAFMS for selective adsorption of metal ions.

  • In the binary ion system, the selective coefficients of the imprinted materials to the target ions are 4 times more than it of the non-imprinted one, and the anti-jamming ability is strong.

  • The imprinted mesoporous adsorbent have a great regeneration performance, the modified amine components have good chemical stability.

Keywords

Mesoporous adsorbent Imprinted Heavy metal removal Selective adsorption 

Notes

Acknowledgements

This research was supported by the Fundamental Research Funds for the Central Universities (2017QNB05).

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.

Supplementary material

10971_2019_4985_MOESM1_ESM.docx (533 kb)
Supplementary Information.

References

  1. 1.
    Sun WQ, Ma GC, Sun YJ et al. (2017) Effective treatment of high phosphorus pharmaceutical wastewater by chemical precipitation. Can J Chem Eng 95:1585–1593CrossRefGoogle Scholar
  2. 2.
    Ai PL, Ahmad ZA (2014) A review on economically adsorbents on heavy metals removal in water and wastewater. Rev Environ Sci Biotechnol 13:163–181CrossRefGoogle Scholar
  3. 3.
    Lu Y, Li XG, Ma BG et al. (2016) Polymorph transformation of tricalcium silicate doped with heavy metal. J Wuhan Univ Technol 31:883–890CrossRefGoogle Scholar
  4. 4.
    Li CX, Zhong H, Wang S et al. (2015) A novel conversion process for waste residue: synthesis of zeolite from electrolytic manganese residue and its application to the removal of heavy metals. Colloids Surf A 470:258–267CrossRefGoogle Scholar
  5. 5.
    Asberry HB, Kuo CY, Gung CH et al. (2014) Characterization of water bamboo husk biosorbents and their application in heavy metal ion trapping. Microchem J 113:59–63CrossRefGoogle Scholar
  6. 6.
    Zhang P, Gong JL, Zeng GM et al. (2017) Cross-linking to prepare composite graphene oxide-framework membranes with high-flux for dyes and heavy metal ions removal. Chem Eng J 322:657–666CrossRefGoogle Scholar
  7. 7.
    Zhao MH, Xu Y, Zhang CS et al. (2016) New trends in removing heavy metals from wastewater. Appl Microbiol Biotechnol 100:6509–6518CrossRefGoogle Scholar
  8. 8.
    Mehdinia A, Shegefti S, Shemirani F (2015) Removal of lead(II), copper(II) and sinc(II) Ions from aqueous solutions using magnetic amine-functionalized mesoporous silica nanocomposites. J Braz Chem Soc 26:2249–2257Google Scholar
  9. 9.
    Shariati S, Khabazipour M, Safa F (2017) Synthesis and application of amine functionalized silica mesoporous magnetite nanoparticles for removal of chromium(VI) from aqueous solutions. J Porous Mater 24:129–139CrossRefGoogle Scholar
  10. 10.
    Tian HJ, Feng QY, Chen YJ et al. (2015) Synthesis of amino-functionalized mesoporous materials with environmentally friendly surfactants by evaporation-induced self-assembly and their application to the adsorption of lead(II) ions. J Mater Sci 50:2768–2778CrossRefGoogle Scholar
  11. 11.
    Zhao DZ, Jing SB, Xu JN et al. (2013) Recycle adsorption of Cu(II) on amine-functionalized mesoporous silica monolithic. Chem Res Chin Univ 29:793–797CrossRefGoogle Scholar
  12. 12.
    Li G, Wang BD, Sun Q et al. (2017) Adsorption of lead ion on amino-functionalized fly-ash-based SBA-15 mesoporous molecular sieves prepared via two-step hydrothermal method. Microporous Mesoporous Mater 252:105–115CrossRefGoogle Scholar
  13. 13.
    Parambadath S et al. (2016) Concentration-dependant selective removal of Cr(III), Pb(II) and Zn(II) from aqueous mixtures using 5-methyl-2-thiophenecarboxaldehyde Schiff base-immobilised SBA-15. J Sol-Gel Sci Technol 79:426–439CrossRefGoogle Scholar
  14. 14.
    Ashrafzadeh-Afshar E, Taher MA, Fazelirad H (2017) Nanosized ion-imprinted polymer doped with Alizarin Red S for separation and quantification of zinc(II) prior to its determination by electrothermal AAS. Microchim Acta 184:2975–2980CrossRefGoogle Scholar
  15. 15.
    Yang H, Chen YJ, Feng QY et al. (2017) Preparation of ion-imprinted amino-functionalized nano-porous silica for selective removal of heavy metal ions from water environment. J Nanosci Nanotechnol 17:6818–6826CrossRefGoogle Scholar
  16. 16.
    Huang K, Chen Y, Zhou F et al. (2017) Integrated ion imprinted polymers-paper composites for selective and sensitive detection of Cd(II) ions. J Hazard Mater 333:137–143CrossRefGoogle Scholar
  17. 17.
    Kazemi E, Dadfarnia S, Shabani AMH et al. (2017) Synthesis, characterization, and application of a Zn(II)- imprinted polymer grafted on graphene oxide/magnetic chitosan nanocomposite for selective extraction of zinc ions from different food sample. Food Chem 237:921–928CrossRefGoogle Scholar
  18. 18.
    Yang S, Qian J, Kuang LJ et al. (2017) Ion-imprinted mesoporous silica for selective removal of uranium from highly acidic and radioactive effluent. ACS Appl Mater Interf 9:29337–29344CrossRefGoogle Scholar
  19. 19.
    Liu Y, Chen R, Yuan D et al. (2015) Thermal-responsive ion-imprinted polymer based on magnetic mesoporous silica SBA-15 for selective removal of Sr(II) from aqueous solution. Colloid Polym Sci 293:109–123CrossRefGoogle Scholar
  20. 20.
    Roushani M, Abbasi S, Khani H (2015) Synthesis and application of ion-imprinted polymer nanoparticles for the extraction and preconcentration of copper ions in environmental water samples. Environ Monitor Assess 187:219CrossRefGoogle Scholar
  21. 21.
    Fan HT, Sun XT, Li WX (2014) Sol–gel derived ion-imprinted silica-supported organic–inorganic hybrid sorbent for selective removal of lead(II) from aqueous solution. J Sol-Gel Sci Technol 72:144–155CrossRefGoogle Scholar
  22. 22.
    Bizley T (2014) Self-organized inorganic–organic phyllosilicate hybrids: investigating bridging ligands and imprinting methods for heavy metal ion adsorption. Knowl Based Syst 72:28–36CrossRefGoogle Scholar
  23. 23.
    Ansari S, Karimi M (2017) Synthesis and application of molecularly imprinted polymer for highly selective solid phase extraction trace amount of sotalol from human urine samples: optimization by central composite design (CCD). Med Chem Res 26:2477–2490CrossRefGoogle Scholar
  24. 24.
    Hande PE, Samui AB, Kulkarni PS (2015) Highly selective monitoring of metals by using ion-imprinted polymers. Environ Sci Pollut Res Int 22:7375–7404CrossRefGoogle Scholar
  25. 25.
    Li YX et al. (2018) Synthesis of ion imprinted mesoporous adsorbent via one-pot synthesis in mild pH for removal of Cd2+ from water. J Sol-Gel Sci Technol 85:259–268CrossRefGoogle Scholar
  26. 26.
    Ren ZQ et al. (2018) Facile and green preparation of novel adsorption materials by combining sol-gel with ion imprinting technology for selective removal of Cu(II) ions from aqueous solution. Appl Surf Sci 435:574–584CrossRefGoogle Scholar
  27. 27.
    Fang KT, Winker P, Zhang Y (2000) Uniform design: theory and application. Technometrics 42:237–248CrossRefGoogle Scholar
  28. 28.
    Liang YZ, Fang KT, Xu QS (2001) Uniform design and its applications in chemistry and chemical engineering. Chemometr Intell Lab Syst 58:43–57CrossRefGoogle Scholar
  29. 29.
    Al-Mter AH, Lu SF (2017) A modified particle swarm optimization algorithm using uniform design. In: International conference on information system and artificial intelligence (ISAI 2016). IEEE, pp 432–435Google Scholar
  30. 30.
    Tan I, Ahmad AL, Hameed BH (2008) Preparation of activated carbon from coconut husk: optimization study on removal of 2,4,6-trichlorophenol using response surface methodology. J Hazard Mater 153:709–717CrossRefGoogle Scholar
  31. 31.
    Rastegar SO, Mousavi SM, Shojaosadati SA et al. (2011) Optimization of petroleum refinery effluent treatment in a UASB reactor using response surface methodology. J Hazard Mater 197:26–32CrossRefGoogle Scholar
  32. 32.
    Huang L, Zhou S, Jin F et al. (2014) Characterization and mechanism analysis of activated carbon fiber felt-stabilized nanoscale zero-valent iron for the removal of Cr(VI) from aqueous solution. Colloids Surf A 447:59–66CrossRefGoogle Scholar
  33. 33.
    Thanh-Dinh Nguyen, MacLachlan Mark J (2014) Biomimetic chiral nematic mesoporous materials from crab cuticles. Adv Optic Mater 2:1031–1037CrossRefGoogle Scholar
  34. 34.
    Yang ZL, Li JL, Zhang CL et al. (2013) Two-dimensional mesoporous materials: from fragile coatings to flexible membranes. Chin Chem Lett 2:89–92CrossRefGoogle Scholar
  35. 35.
    Shougao L (2013) Synthesis, characterization and catalytic performance evaluation of Pt—a micropore/mesoporous molecular sieve. Dissertation, Taiyuan University of TechnologyGoogle Scholar
  36. 36.
    Langmuir I (1916) The constitution and fundamental properties of solids and liquids. J Am Chem Soc 38:2221–2295CrossRefGoogle Scholar
  37. 37.
    Langmuir I (1918) The adsorption of gases on plane surfaces of glass, mica and platinum. J Am Chem Soc 40:1361–1403CrossRefGoogle Scholar
  38. 38.
    Reddad Z et al. (2002) Adsorption of several metal ions onto a low-cost biosorbent: kinetic and equilibrium studies. Environ Sci Technol 36:2067–2073CrossRefGoogle Scholar
  39. 39.
    Pan BC et al. (2002) Adsorption of aromatic acids on an aminated hypercrosslinked macroporous polymer. React Funct Polym 53:63–72CrossRefGoogle Scholar
  40. 40.
    Redlich O, Peterson DL (1959) A useful adsorption isotherm. J Phys Chem 63:1024CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  • Hong Yang
    • 1
    Email author
  • Jiaxi Fan
    • 1
  • Huijuan Tian
    • 2
  • Xiaoyu Wang
    • 3
  • Weng Fu
    • 3
  • Easar Alam
    • 1
  1. 1.School of Environmental Science and Spatial InformaticsChina University of Mining and TechnologyXuzhouPeople’s Republic of China
  2. 2.School of Geomatics and Marine InformationHuaihai Institute of TechnologyLianyungangPeople’s Republic of China
  3. 3.School of Chemical EngineeringThe University of QueenslandSt LuciaAustralia

Personalised recommendations