Advertisement

Journal of Sol-Gel Science and Technology

, Volume 88, Issue 1, pp 249–254 | Cite as

Fabrication of UV-curable silicone coating with high transmittance and laser-induced damage threshold for high-power laser system

  • Xue-Ran Deng
  • Wei Yang
  • Qing-Hua Zhang
  • Hao-Hao Hui
  • Yao-Wei Wei
  • Jian Wang
  • Qiao Xu
  • Xiang-Yang Lei
  • Jin-Ju Chen
  • Ji-Liang Zhu
Original Paper: Sol-gel and hybrid materials for optical, photonic and optoelectronic applications
  • 88 Downloads

Abstract

Third harmonic generating (THG) element is an important component for high-power laser system and its incident side is in need of high transmittance and laser-induced damage threshold (LIDT) at specified wavelengths (1064 nm and 532 nm) to meet the demand of laser-driven inertial confinement fusion. An UV-curable organic–inorganic hybrid silicone coating was fabricated for this THG element and its relevant properties have been investigated. Si–O–Si backbone structure in combination with characteristics from a mixture of tripropyleneglycoldiacrylate (TPGDA) as a reactive diluent and Darocur 1173 (HMPP) as a photoinitiator provided qualified adhesion, hardness, transmittance, and laser damage resistance for the UV-cured coating. Based on this design, THG element with both high transmittance and LIDT at specified wavelengths was successfully achieved after the solidification of coatings by means of UV irradiation, which provides an alternate option to cure coatings upon the temperature-sensitive substrates (like potassium dideuterium phosphate (DKDP), ammonium dihydrogen phosphate (ADP), and so on) without heating, and meanwhile greatly reduces the time consumption of curing process.

Highlights

  • Photopolymerization of silicone coating is applied in high-power laser system.

  • Qualified optical, mechanical, and laser-resistant property is achieved.

  • The phase transition problem of precious DKDP crystal is solved.

Keywords

UV-curable Silicone coating Transmittance Laser-induced damage threshold High-power laser system 

Notes

Acknowledgements

This work is supported by the National Natural Science Foundation of China (grant no. 51505575).

Compliance with ethical standards

Conflict of interest

The authors declare that they have no conflict of interest.

References

  1. 1.
    Nuckolls J, Wood L, Thiessen A, Zimmerman G (1972) Laser compression of matter to super-high densities: thermonuclear (CTR) applications. Nature 239:139–142CrossRefGoogle Scholar
  2. 2.
    Meyer-ter-Vehn J (1997) Prospects of inertial confinement fusion. Plasma Phys Control Fusion 39:B39–B45CrossRefGoogle Scholar
  3. 3.
    Thomas IM (1991) Optical and environmentally protective coatings for potassium dihydrogen phosphate (KDP) harmonic converter crystals. Proc SPIE 1561:70–82CrossRefGoogle Scholar
  4. 4.
    Miller GH, Moses EI, Wuest CR (2004) The national ignition facility. Opt Eng 43:2841–2853CrossRefGoogle Scholar
  5. 5.
    Wouters MEL, Wolfs DP, van der Linde MC, Hovens JHP, Tinnemans AHA (2004) Transparent UV curable antistatic hybrid coatings on polycarbonate prepared by the sol-gel method. Prog Org Coat 51:312–319CrossRefGoogle Scholar
  6. 6.
    Park GW, Hwang CG, Jung JW, Jung YM (2012) Improvement in long-term stability and photovoltaic performance of UV cured resin polymer gel electrolyte for dye-sensitized solar cell. Bull Korean Chem Soc 33:4093–4097CrossRefGoogle Scholar
  7. 7.
    Kardar P, Ebrahimi M, Bastani S (2014) Curing behaviour and mechanical properties of pigmented UV-curable epoxy acrylate coatings. Pigment Resin Technol 43:177–184CrossRefGoogle Scholar
  8. 8.
    Corcione CE, Striani R, Frigione M (2014) Organic-inorganic UV-cured methacrylic-based hybrids as protective coatings for different substrates. Prog Org Coat 77:1117–1125CrossRefGoogle Scholar
  9. 9.
    Xie H, Shi W (2014) Polymer/SiO2 hybrid nanocomposites prepared through the photoinitiator-free UV curing and sol-gel process. Compos Sci Technol 93:90–96CrossRefGoogle Scholar
  10. 10.
    Bauer F, Decker U, Czihal K, Mehenrt R, Riedel C, Riemschneider M, Schubert R, Buchmeiser M (2009) UV curing and matting of acrylate nanocomposite coatings by 172 nm excimer irradiation. Prog Org Coat 64:474–481CrossRefGoogle Scholar
  11. 11.
    Bauer F, Decker U, Naumov S, Riedel C (2010) UV curing and matting of acrylate nanocomposite coatings by 172 nm excimer irradiation, Part 2. Prog Org Coat 69:287–293CrossRefGoogle Scholar
  12. 12.
    Bauer F, Decker U, Naumov S, Riedel C (2014) Photoinitiator-free UV curing and matting of acrylate-based nanocomposite coating: Part 3. Prog Org Coat 77:1085–1094CrossRefGoogle Scholar
  13. 13.
    Corcione CE, Striani R, Frigione M (2014) Novel hydrophobic free-solvent UV-cured hybrid organic-inorganic methacrylic-based coatings for porous stones. Prog Org Coat 77:803–812CrossRefGoogle Scholar
  14. 14.
    Decker C, Nguyen Thi Viet T, Decker D, Weber-Koehl E (2001) UV-radiation curing of acrylate/epoxide systems. Polymer 42:5531–5541CrossRefGoogle Scholar
  15. 15.
    Yan ZL, Liu WQ, Gao N, Wang HL, Su K (2013) Synthesis and properties of a novel UV-cured fluorinated siloxane graft copolymer for improved surface, dielectric and tribological properties of epoxy acrylate coating. Appl Surf Sci 284:683–691CrossRefGoogle Scholar
  16. 16.
    Zhang JY, Windall G, Boyd IW (2002) UV curing of optical fibre coatings using excimer lamps. Appl Surf Sci 186:568–572CrossRefGoogle Scholar
  17. 17.
    Soppera O, Croutxe-Barghorn C (2003) Real-time Fourier transform infrared study of free-radical UV-induced polymerization of hybrid sol-gel. I. Effect of silicate backbone on photopolymerization kinetics. J Polym Sci Polym Chem 41:716–724CrossRefGoogle Scholar
  18. 18.
    Ataollahi N, Cappelletto E, Vezzu K, Di Noto V, Cavinato G, Callone E, Dire S, Scardi P, Di Maggio R (2018) Properties of anion exchange membrane based on polyamine: Effect of functionalized silica particles prepared by sol-gel method. Solid State Ion 322:85–92CrossRefGoogle Scholar
  19. 19.
    Craven M, Xiao D, Kunstmann-Olsen C, Kozhevnikova EF, Blanc F, Steiner A, Kozhevnikov IV (2018) Oxidative desulfurization of diesel fuel catalyzed by polyoxometalate immobilized on phosphazene-functionalized silica. Appl Catal B 231:82–91CrossRefGoogle Scholar
  20. 20.
    Wang S, Chen K, Wang Q (2018) Ytterbium triflate immobilized on sulfo-functionalized SBA-15 catalyzed conversion of cellulose to lactic acid. J Porous Mater 25:1531–1539CrossRefGoogle Scholar
  21. 21.
    Lin J, Wu X, Zheng C, Zhang P, Li Q, Wang W, Yang Z (2014) A novolac epoxy resin modified polyurethane acylates polymer grafted network with enhanced thermal and mechanical properties. J Polym Res 21:435CrossRefGoogle Scholar
  22. 22.
    Taheri-Shakib J, Shekarifard A, Naderi H (2018) Heavy crude oil upgrading using nanoparticles by applying electromagnetic technique. Fuel 232:703–711CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Research Center of Laser FusionChina Academy of Engineering PhysicsMianyangChina
  2. 2.School of Materials and EnergyUniversity of Electronic Science and Technology of ChinaChengduChina
  3. 3.College of Materials Science and EngineeringSichuan UniversityChengduChina

Personalised recommendations