Advertisement

Journal of Radioanalytical and Nuclear Chemistry

, Volume 322, Issue 2, pp 1023–1030 | Cite as

Salt-free separation of 241Am(III) from lanthanides by highly stable macroporous silica-polymer based Me2-CA-BTP/SiO2-P adsorbent

  • Shunyan NingEmail author
  • Shichang Zhang
  • Jie Zhou
  • Wei Zhang
  • Yuezhou WeiEmail author
Article
  • 19 Downloads

Abstract

Macroporous Me2-CA-BTP/SiO2-P was used for separating 241Am(III) from lanthanides. Good selectivity towards 241Am(III) was achieved in 0.1–3 M HNO3. Adsorption equilibrium of 241Am(III) was obtained within 1 h in 0.1 M HNO3 solution. 241Am(III) was efficiently separated from lanthanides through column experiment in both 0.1 M HNO3 and 0.01 M HNO3–0.34 M NaNO3 solution. It still performed excellently at 207 kGy under γ irradiation in nitrate medium. In a word, Me2-CA-BTP/SiO2-P is a very promising candidate for separating MA from Ln that even a salt-free Ln&MA separation process may be established such as from 0.1 M HNO3 based on it.

Keywords

Minor actinides BTP HLLW Irradiation Extraction chromatography 

Notes

Acknowledgements

This work was supported by the National Natural Science Foundation of China (11705032, 11675102); and the Natural Science Foundation of Guangxi Province (2017GXNSFBA198175); and the Science and Technology Major Project of Guangxi Province (AA17204100).

References

  1. 1.
    Ozawa M, Sano Y, Tanaka Y (2000) CMPO-TRUEX process and its application in the separation of actinides from high-level liquid wastes. Min Process Extr Metall Rev 21:249–275CrossRefGoogle Scholar
  2. 2.
    Wang Z, Huang H, Ding S, Hu X, Zhang L, Liu Y, Song L, Chen Z, Li S (2017) Extraction of trivalent Americium and Europium with TODGA homologs from HNO3 solution. J Radioanal Nucl Chem 313:309–318CrossRefGoogle Scholar
  3. 3.
    Ekberg C, Fermvik A, Retegan T, Skarnemark G, Foreman MRS, Hudson MJ, Englund S, Nilsson M (2008) An overview and historical look back at the solvent extraction using nitrogen donor ligands to extract and separate An(III) from Ln(III). Radiochim Acta 96:225–233CrossRefGoogle Scholar
  4. 4.
    Chen J, Zhu Y, Jiao R (1996) The Separation of Am from lanthanides by purified cyanex 301 extraction. Sep Sci Technol 31:2723–2731CrossRefGoogle Scholar
  5. 5.
    Jianchen W, Chongli S (2001) Hot test of trialkyl phosphine oxide (TRPO) for removing actinides from highly saline high-level liquid waste (HLLW). Solv Extr Ion Exch 19:231–242CrossRefGoogle Scholar
  6. 6.
    Panak PJ, Geist A (2013) Complexation and extraction of trivalent actinides and lanthanides by triazinylpyridine N-donor ligands. Chem Rev 113:1199–1236CrossRefGoogle Scholar
  7. 7.
    Ning S, Zhang W, Yu S, Zhang S, Zhou J, Wang X, Wei Y (2019) Selective separation of MA(III) from Ln(III) by highly stable silica-polymer-based N-donor IsoBu-BTP/SiO2-P adsorbent. Extr Ion Exch 37(2):126–139CrossRefGoogle Scholar
  8. 8.
    Ekberg C, Lofstrom-Engdahl E, Aneheim E, Foreman MR, Geist A, Lundberg D, Denecke M, Persson I (2015) The structures of CyMe4-BTBP complexes of americium(iii) and europium(iii) in solvents used in solvent extraction, explaining their separation properties. Dalton Trans 44:18395–18402CrossRefGoogle Scholar
  9. 9.
    Afsar A, Harwood LM, Hudson MJ, Distler P, John J (2014) Effective separation of Am(III) and Eu(III) from HNO3 solutions using CyMe4-BTPhen-functionalized silica-coated magnetic nanoparticles. Chem Commun (Camb) 50:15082–15085CrossRefGoogle Scholar
  10. 10.
    Stefanovsky SV, Skvortsov IV, Belova EV, Rodin AV (2017) Study of thermal and radiation stability of the extractant based on CMPO in fluorinated sulfones. MRS Adv 2:641–647CrossRefGoogle Scholar
  11. 11.
    Yuan W, Wang C, Ao Y, Zhao L, Shi W, Zhai M (2016) γ-Radiation effect on Th4+ extraction behaviour of TODGA/[C2mim][NTf2]: identification and extractability study of radiolytic products. RSC Adv 6:7626–7632CrossRefGoogle Scholar
  12. 12.
    Mincher BJ, Mezyk SP, Elias G, Groenewold GS, Riddle CL, Olson LG (2013) The radiation chemistry of CMPO: part 1. Gamma radiolysis. Solv Extr Ion Exch 31:715–730CrossRefGoogle Scholar
  13. 13.
    Li W, Duan W, Sun T, Liu C, Wang J, Chen J (2017) Denitration of simulated high-level liquid waste by formic acid for the connection of PUREX process with TRPO process. J Radioanal Nucl Chem 314:221–229CrossRefGoogle Scholar
  14. 14.
    Veliscek-Carolan J (2016) Separation of actinides from spent nuclear fuel: a review. J Hazard Mater 318:266–281CrossRefGoogle Scholar
  15. 15.
    Schmidt H, Wilden A, Modolo G, Bosbach D, Santiago-Schübel B, Hupert M, Švehla J, Grüner B, Ekberg C (2016) Gamma radiolysis of the highly selective ligands CyMe4BTBP and CyMe4BTPhen: qualitative and quantitative investigation of radiolysis products. Procedia Chem 21:32–37CrossRefGoogle Scholar
  16. 16.
    Modolo AWG, Kaufholz P, Bosbach D, Geist A (2014) Development and demonstration of innovative partitioning processes (i-SANEX and 1-cycle SANEX) for actinide partitioning. Prog Nucl Energy 72:107–114CrossRefGoogle Scholar
  17. 17.
    Ning SY, Wang XP, Zou Q, Shi WQ, Tang FD, He LF, Wei YZ (2017) Direct separation of minor actinides from high level liquid waste by Me2-CA-BTP/SiO2-P adsorbent. Sci Rep 7:14679CrossRefGoogle Scholar
  18. 18.
    Ning S, Wang X, Liu R, Wei Y, He L, Tang F (2015) Evaluation of Me2-CA-BTP/SiO2-P adsorbent for the separation of minor actinides from simulated HLLW. J Radioanal Nucl Chem 303:2011–2017Google Scholar
  19. 19.
    Ning S, Zou Q, Wang X, Liu R, Wei Y (2016) Adsorption behavior of Me2-CA-BTP/SiO2-P adsorbent toward MA(III) and Ln(III) in nitrate solution. Sci China Chem 59:862–868CrossRefGoogle Scholar
  20. 20.
    Ning S, Zou Q, Wang X, Liu R, Wei Y, Zhao Y, Ding Y (2016) Evaluation study on silica/polymer-based CA-BTP adsorbent for the separation of minor actinides from simulated high-level liquid wastes. J Radioanal Nucl Chem 307:993–999CrossRefGoogle Scholar
  21. 21.
    Hoshi H, Wei YZ, Kumagai M, Asakura T, Morita Y (2006) Separation of trivalent actinides from lanthanides by using R-BTP resins and stability of R-BTP resin. J Alloys Compd 408–412:1274–1277CrossRefGoogle Scholar
  22. 22.
    Dupont C, Hill C, Suzenet F, Guillaumet G (2013) Influence of an alkoxy group on bis-triazinyl-pyridines for selective extraction of Americium(III). Solv Extr Ion Exch 31:253–268CrossRefGoogle Scholar
  23. 23.
    Sebastian Höfener MT, Koke Carsten, Heuser Johannes, Ekström Ulf, Skerencak-Frech Andrej, Schimmelpfennig Bernd, Panak Petra J (2016) Computing UV vis spectra using a combined molecular dynamics and quantum chemistry approach bis-triazin-pyridine (BTP) ligands studied in solution Phys. Chem Chem Phys 18:7728–7736CrossRefGoogle Scholar
  24. 24.
    Halleröd J, Ekberg C, Authen T, Bertolo L, Lin M, Grüner B, Švehla J, Wagner C, Geist A, Panak P, Aneheim E (2018) On the basic extraction properties of a phenyl trifluoromethyl sulfone-based GANEX system containing CyMe4-BTBP and TBP. Solv Extr Ion Exch 36:360–372CrossRefGoogle Scholar

Copyright information

© Akadémiai Kiadó, Budapest, Hungary 2019

Authors and Affiliations

  1. 1.Guangxi Key Laboratory of Processing for Non-ferrous Metals and Featured Materials, School of Resources, Environment and MaterialsGuangxi UniversityNanningPeople’s Republic of China
  2. 2.School of Nuclear Science and EngineeringShanghai Jiao Tong UniversityShanghaiPeople’s Republic of China

Personalised recommendations