Preparation and sublimation of uranium tetrafluoride for the production of thin 235UF4 targets
Article
First Online:
Received:
- 178 Downloads
- 2 Citations
Abstract
A wet chemical precipitation method to convert triuranium octoxide (U3O8), into uranium tetrafluoride (UF4) has been applied to determine the process yield. In this paper the wet chemical precipitation method is described in detail with a quantitative example and yield calculation. Also the vacuum deposition via sublimation of the uranium tetrafluoride is described and the prepared targets are shown.
Keywords
235U Target Radiochemistry Wet chemical precipitation SublimationNotes
Acknowledgments
The authors would like to thank Dr. Rožle Jakopič and Dr. Timotheos Altzitzoglou for their contribution and valuable discussions.
References
- 1.Joint Research Centre, The European Commission’s in-house science service, Neutron data. https://ec.europa.eu/jrc/en/research-topic/neutron-data. Accessed 9 July 2014
- 2.Gueneau C et al (2011) Thermodynamic modelling of advanced oxide and carbide nuclear fuels: description of the U–Pu–O–C systems. J Nucl Mater 419:145–167CrossRefGoogle Scholar
- 3.Eykens R, Pauwels J, Van Audenhove J (1985) The hydrofluorination of uranium and plutonium. Nucl Instrum Meth. A 236:497–499CrossRefGoogle Scholar
- 4.Stolarz A, Eykens R, Moens A, Aregbe Y (2010) Actinide target preparation at IRMM–then and now. Nucl Instrum Meth. A 613:351–356CrossRefGoogle Scholar
- 5.Richter S, Goldberg SA (2003) Improved techniques for high accuracy isotope ratio measurements of nuclear materials using thermal ionization mass spectrometry. Int J Mass Spectrom 229:181–197CrossRefGoogle Scholar
- 6.Wiberg E, Holleman AF (2001) Inorganic chemistry. Elsevier, AmsterdamGoogle Scholar
Copyright information
© Akadémiai Kiadó, Budapest, Hungary 2015