Advertisement

Amphiphilic tadpole-shaped POSS-poly(glycerol methacrylate) hybrid polymers: synthesis and self-assembly

  • Asad Ullah
  • Syed Mujtaba Shah
  • Hazrat Hussain
ORIGINAL PAPER
  • 11 Downloads

Abstract

A new series of well-defined amphiphilic hybrid polymers of tadpole-shaped architecture with polyhedral oligomeric silsesquioxane (POSS) nanocage as the hydrophobic head and poly(glycerol methacrylate) (PGMA) as the hydrophilic tail (POSS-PGMA) has been synthesized via atom transfer radical polymerization (ATRP). The aminopropylIsobutyl POSS, a monofunctional POSS nanocage, was transformed into ATRP initiator by treating with 2-bromoisobutyrylbromide. The POSS-PGMA was achieved in two steps. First, solketal methacrylate (SMA) (the precursor monomer for GMA), synthesized by reacting solketal with methacryloyl chloride, was polymerized under typical ATRP conditions with THF as the solvent at 40 °C, employing the synthesized POSS based initiator, and CuCl/N,N,N,N,N-pentamethyldiethylenetriamine as the catalyst system. The size exclusion chromatography (SEC) chromatograms reveal monomodal molecular weight distributions and narrow polydispersity indices; suggesting that well-defined tadpole-shaped hybrid polymers have been achieved. This further confirms that the monofunctional POSS initiator is able to affectively polymerize SMA in a controlled fashion under ATRP conditions. In the second step, the obtained POSS-PSMA was transformed into amphiphilic POSS-PGMA by acid hydrolysis. The successful transformation could be verified by 1H NMR and FTIR spectroscopy. Finally, because of the amphiphilic nature, the obtained POSS-PGMA could self-assemble when dispersed in water as confirmed by measuring the critical aggregation concentration (CAC) by fluorescence spectroscopy, using pyrene as the fluorescence probe. The CAC was found to increase with increasing the PGMA chain length. The large hydrodynamic size of the self-assembled structures, as determined by the laser light scattering data, however, suggests that the aggregates are not of typical core-shell type micelles.

Keywords

POSS Tadpole-shaped ATRP Self-assembly PGMA 

Notes

Acknowledgements

H.H. gratefully acknowledges the financial support from Higher Commission (HEC) of Pakistan under NRPU project No. 20-3074/NRPU/R&D/HEC/13 and QAU URF.

Supplementary material

10965_2018_1662_MOESM1_ESM.docx (157 kb)
ESM 1 (DOCX 157 kb)

References

  1. 1.
    Brown Jr JF (1965) The polycondensation of phenylsilanetriol. J Am Chem Soc 87:4317–4324CrossRefGoogle Scholar
  2. 2.
    Sprung M, Guenther F (1955) The partial hydrolysis of methyltriethoxysilane. J Am Chem Soc 77:3990–3996CrossRefGoogle Scholar
  3. 3.
    Scott DW (1946) Thermal rearrangement of branched-chain methylpolysiloxanes1. J Am Chem Soc 68:356–358CrossRefGoogle Scholar
  4. 4.
    Baney RH, Itoh M, Sakakibara A, Suzuki T (1995) Silsesquioxanes. Chem Rev 95:1409–1430CrossRefGoogle Scholar
  5. 5.
    Voronkov MG, Lavrent'yev VI (1982) Polyhedral oligosilsesquioxanes and their homo derivatives. In: Inorganic ring systems. Springer, pp 199–236Google Scholar
  6. 6.
    Feher FJ (1986) Polyhedral oligometallasilsesquioxanes (POMSS) as models for silica-supported transition-metal catalysts. Synthesis and characterization of (C5Me5) Zr [(Si7O12)(c-C6H11) 7]. J Am Chem Soc 108:3850–3852CrossRefGoogle Scholar
  7. 7.
    Zhang C, Laine RM (2000) Hydrosilylation of allyl alcohol with [HSiMe2OSiO1. 5] 8: octa (3-hydroxypropyldimethylsiloxy) octasilsesquioxane and its octamethacrylate derivative as potential precursors to hybrid nanocomposites. J Am Chem Soc 122:6979–6988CrossRefGoogle Scholar
  8. 8.
    Oleksy M, Galina H (2013) Unsaturated polyester resin composites containing bentonites modified with silsesquioxanes. Ind Eng Chem Res 52:6713–6721CrossRefGoogle Scholar
  9. 9.
    Markovic E, Ginic-Markovic M, Clarke S, Matisons J, Hussain M, Simon GP (2007) Poly(ethylene glycol)-octafunctionalized polyhedral oligomeric silsesquioxane: synthesis and thermal analysis. Macromolecules 40:2694–2701CrossRefGoogle Scholar
  10. 10.
    Guenthner AJ, Lamison KR, Lubin LM, Haddad TS, Mabry JM (2012) Hansen solubility parameters for octahedral oligomeric silsesquioxanes. Ind Eng Chem Res 51:12282–12293CrossRefGoogle Scholar
  11. 11.
    Chen K, Yu J, Qiu Z (2013) Effect of low octavinyl-polyhedral oligomeric silsesquioxanes loading on the crystallization kinetics and morphology of biodegradable poly(ethylene succinate-co-5.1 mol% ethylene adipate) as an efficient nucleating agent. Ind Eng Chem Res 52:1769–1774CrossRefGoogle Scholar
  12. 12.
    Wu J, Mather PT (2009) POSS polymers: physical properties and biomaterials applications. Polym Rev 49:25–63CrossRefGoogle Scholar
  13. 13.
    Wang X, Xuan S, Song L, Yang H, Lu H, Hu Y (2012) Synergistic effect of POSS on mechanical properties, flammability, and thermal degradation of intumescent flame retardant polylactide composites. J Polym Sci B Polym Phys 51:255–268Google Scholar
  14. 14.
    Du F, Tian J, Wang H, Liu B, Jin B, Bai R (2012) Synthesis and luminescence of POSS-containing perylene bisimide-bridged amphiphilic polymers. Macromolecules 45:3086–3093CrossRefGoogle Scholar
  15. 15.
    Mohamed MG, Hsu KC, Hong JL, Kuo SW (2016) Unexpected fluorescence from maleimide-containing polyhedral oligomeric silsesquioxanes: nanoparticle and sequence distribution analyses of polystyrene-based alternating copolymers. Polym Chem 7:135–145CrossRefGoogle Scholar
  16. 16.
    Mohamed MG, Jheng YR, Yeh SL, Chen T, Kuo SW (2017) Unusual emission of polystyrene-based alternating copolymers incorporating aminobutyl maleimide fluorophore-containing polyhedral oligomeric silsesquioxane nanoparticles. Polymers 9:103–122CrossRefGoogle Scholar
  17. 17.
    Lin H, Wan X, Jiang X, Wang Q, Yin J (2011) A nanoimprint lithography hybrid photoresist based on the thiol–ene system. Adv Funct Mater 21:2960–2967CrossRefGoogle Scholar
  18. 18.
    Pu Y, Zhang L, Zheng H, He B, Gu Z (2014) Synthesis and drug release of star-S haped poly(benzyl l-aspartate)-block-poly(ethylene glycol) copolymers with POSS cores. Macromol Biosci 14:289–297CrossRefGoogle Scholar
  19. 19.
    Pu Y, Zhang L, Zheng H, He B, Gu Z (2014) Drug release of pH-sensitive poly(L-aspartate)-b-poly(ethylene glycol) micelles with POSS cores. Polym Chem 5:463–470CrossRefGoogle Scholar
  20. 20.
    Loh XJ, Zhang Z-X, Mya KY, Y-l W, He CB, Li J (2010) Efficient gene delivery with paclitaxel-loaded DNA-hybrid polyplexes based on cationic polyhedral oligomeric silsesquioxanes. J Mater Chem 20:10634–10642CrossRefGoogle Scholar
  21. 21.
    Pramudya I, Rico CG, Lee C, Chung H (2016) POSS-containing bioinspired adhesives with enhanced mechanical and optical properties for biomedical applications. Biomacromolecules 17:3853–3861CrossRefGoogle Scholar
  22. 22.
    Wang DK, Varanasi S, Strounina E, Hill DJ, Symons AL, Whittaker AK, Rasoul F (2014) Synthesis and characterization of a POSS-PEG macromonomer and POSS-PEG-PLA hydrogels for periodontal applications. Biomacromolecules 15:666–679CrossRefGoogle Scholar
  23. 23.
    Wei K, Li L, Zheng S, Wang G, Liang Q (2014) Organic–inorganic random copolymers from methacrylate-terminated poly(ethylene oxide) with 3-methacryloxypropylheptaphenyl polyhedral oligomeric silsesquioxane: synthesis via RAFT polymerization and self-assembly behavior. Soft Matter 10:383–394CrossRefGoogle Scholar
  24. 24.
    Xu Y, Xie J, Chen L, Yuan C, Pan Y, Cheng L, Luo W, Zeng B, Dai L (2013) A novel hybrid random copolymer poly(MAPOSS-co-NIPAM-co-OEGMA-co-2VP): synthesis, characterization, self-assembly behaviors and multiple responsive properties. Macromol Res 21:1338–1348CrossRefGoogle Scholar
  25. 25.
    Wang Z, Tan BH, Hussain H, He C (2013) pH-responsive amphiphilic hybrid random-type copolymers of poly(acrylic acid) and poly(acrylate-POSS): synthesis by ATRP and self-assembly in aqueous solution. Colloid Polym Sci 291:1803–1815CrossRefGoogle Scholar
  26. 26.
    Tan B, Hussain H, He C (2011) Tailoring micelle formation and gelation in (PEG− P(MA-POSS)) amphiphilic hybrid block copolymers. Macromolecules 44:622–631CrossRefGoogle Scholar
  27. 27.
    Zheng Y, Wang L, Yu R, Zheng S (2012) Synthesis and self-assembly behavior of organic–inorganic poly(ethylene oxide)-block-poly(MA POSS)-block-poly(N-isopropylacrylamide) triblock copolymers. Macromol Chem Phys 213:458–469CrossRefGoogle Scholar
  28. 28.
    Xu Y, Chen M, Xie J, Li C, Yang C, Deng Y, Yuan C, Chang F-C, Dai L (2013) Synthesis, characterization and self-assembly of hybrid pH-sensitive block copolymer containing polyhedral oligomeric silsesquioxane (POSS). React Funct Polym 73:1646–1655CrossRefGoogle Scholar
  29. 29.
    Yang C, Deng Y, Zeng B, Yuan C, Chen M, Luo W, Liu J, Xu Y, Dai L (2012) Hybrid amphiphilic block copolymers containing polyhedral oligomeric silsesquioxane: synthesis, characterization, and self-assembly in solutions. J Polym Sci A Polym Chem 50:4300–4310CrossRefGoogle Scholar
  30. 30.
    Hong L, Zhang Z, Zhang W (2014) Synthesis of organic/inorganic polyhedral oligomeric Silsesquioxane-containing block copolymers via reversible addition–fragmentation chain transfer polymerization and their self-assembly in aqueous solution. Ind Eng Chem Res 53:10673–10680CrossRefGoogle Scholar
  31. 31.
    Hong L, Zhang Z, Zhang Y, Zhang W (2014) Synthesis and self-assembly of stimuli-responsive amphiphilic block copolymers based on polyhedral oligomeric silsesquioxane. J Polym Sci A Polym Chem 52:2669–2683CrossRefGoogle Scholar
  32. 32.
    Ullah A, Ullah S, Khan GS, Shah SM, Hussain Z, Muhammad S, Siddiq M, Hussain H (2016) Water soluble polyhedral oligomeric silsesquioxane based amphiphilic hybrid polymers: synthesis, self-assembly, and applications. Eur Polym J 75:67–92CrossRefGoogle Scholar
  33. 33.
    Hussain H, Tan B, Mya K, Liu Y, He C, Davis TP (2010) Synthesis, micelle formation, and bulk properties of poly(ethylene glycol)-b-poly(pentafluorostyrene)-g-polyhedral oligomeric silsesquioxane amphiphilic hybrid copolymers. J Polym Sci A Polym Chem 48:152–163CrossRefGoogle Scholar
  34. 34.
    Hussain H, Tan B, Seah G, Liu Y, He C, Davis T (2010) Micelle formation and gelation of (PEG− P (MA-POSS)) amphiphilic block copolymers via associative hydrophobic effects. Langmuir 26:11763–11773CrossRefGoogle Scholar
  35. 35.
    Zhang W, Fang B, Walther A, Müller AH (2009) Synthesis via RAFT polymerization of tadpole-shaped organic/inorganic hybrid poly(acrylic acid) containing polyhedral oligomeric silsesquioxane (POSS) and their self-assembly in water. Macromolecules 42:2563–2569CrossRefGoogle Scholar
  36. 36.
    Zheng Y, Wang L, Zheng S (2012) Synthesis and characterization of heptaphenyl polyhedral oligomeric silsesquioxane-capped poly(N-isopropylacrylamide) s. Eur Polym J 48:945–955CrossRefGoogle Scholar
  37. 37.
    Wang L, Zeng K, Zheng S (2011) Hepta (3, 3, 3-trifluoropropyl) polyhedral oligomeric silsesquioxane-capped poly(N-isopropylacrylamide) telechelics: synthesis and behavior of physical hydrogels. ACS Appl Mater Interfaces 3:898–909CrossRefGoogle Scholar
  38. 38.
    Wang L, Zheng S (2012) Surface morphology and dewettability of self-organized thermosets involving epoxy and POSS-capped poly(ethylene oxide) telechelics. Mater Chem Phys 136:744–754CrossRefGoogle Scholar
  39. 39.
    Kim B-S, Mather PT (2002) Amphiphilic telechelics incorporating polyhedral oligosilsesquioxane: 1. Synthesis and characterization. Macromolecules 35:8378–8384CrossRefGoogle Scholar
  40. 40.
    Zhang W, Yuan J, Weiss S, Ye X, Li C, Müller AH (2011) Telechelic hybrid poly(acrylic acid) s containing polyhedral oligomeric silsesquioxane (POSS) and their self-assembly in water. Macromolecules 44:6891–6898CrossRefGoogle Scholar
  41. 41.
    Kuo SW, Lee HF, Huang WJ, Jeong KU, Chang FC (2009) Solid state and solution self-assembly of helical polypeptides tethered to polyhedral oligomeric silsesquioxanes. Macromolecules 42:1619–1626CrossRefGoogle Scholar
  42. 42.
    Yu X, Zhong S, Li X, Tu Y, Yang S, Van Horn RM, Ni C, Pochan DJ, Quirk RP, Wesdemiotis C (2010) A giant surfactant of polystyrene−(carboxylic acid-functionalized polyhedral oligomeric silsesquioxane) amphiphile with highly stretched polystyrene tails in micellar assemblies. J Am Chem Soc 132:16741–16744CrossRefGoogle Scholar
  43. 43.
    Wang Z, Li Y, Dong XH, Yu X, Guo K, Su H, Yue K, Wesdemiotis C, Cheng SZ, Zhang WB (2013) Giant gemini surfactants based on polystyrene–hydrophilic polyhedral oligomeric silsesquioxane shape amphiphiles: sequential “click” chemistry and solution self-assembly. Chem Sci 4:1345–1352CrossRefGoogle Scholar
  44. 44.
    Huang M, Hsu CH, Wang J, Mei S, Dong X, Li Y, Li M, Liu H, Zhang W, Aida T, Zhang WB (2015) Selective assemblies of giant tetrahedra via precisely controlled positional interactions. Science 348:424–428CrossRefGoogle Scholar
  45. 45.
    Zhang W, Liu L, Zhuang X, Li X, Bai J, Chen Y (2008) Synthesis and self-assembly of tadpole-shaped organic/inorganic hybrid poly(N-isopropylacrylamide) containing polyhedral oligomeric silsesquioxane via RAFT polymerization. J Polym Sci A Polym Chem 46:7049–7061CrossRefGoogle Scholar
  46. 46.
    Zhang W, Wang S, Kong J (2012) Hemi-telechelic and telechelic organic/inorganic poly(ethylene oxide) hybrids based on polyhedral oligmeric silsesquioxanes (POSSs): synthesis, morphology, and self-assembly. React Funct Polym 72:580–587CrossRefGoogle Scholar
  47. 47.
    Ma Y, Gao H, Gu W, Yang YW, Wang Y, Fan Y, Wu G, Ma J (2012) Carboxylated poly (glycerol methacrylate) s for doxorubicin delivery. Eur J Pharm Sci 45:65–72CrossRefGoogle Scholar
  48. 48.
    Gu W, Ma Y, Zhu C, Chen B, Ma J, Gao H (2012) Synthesis of cross-linked carboxyl poly (glycerol methacrylate) and its application for the controlled release of doxorubicin. Eur J Pharm Sci 47:556–563CrossRefGoogle Scholar
  49. 49.
    Choi S, Jhon MS, Andrade JD (1977) Nature of water in synthetic hydrogels: III. Dilatometry, specific conductivity, and dielectric relaxation of poly(2, 3-dihydroxypropyl methacrylate). J Colloid Interface Sci 61:1–8CrossRefGoogle Scholar
  50. 50.
    Gates G, Harmon J, Ors J, Benz P (2003) Intra and intermolecular relaxations 2, 3-dihydroxypropyl methacrylate and 2-hydroxyethyl methacrylate hydrogels. Polymer 44:207–214CrossRefGoogle Scholar
  51. 51.
    Gates G, Harmon J, Ors J, Benz P (2003) 2, 3-Dihydroxypropyl methacrylate and 2-hydroxyethyl methacrylate hydrogels: gel structure and transport properties. Polymer 44:215–222CrossRefGoogle Scholar
  52. 52.
    Leung BKO, Robinson GB (1993) The structure of crosslinked poly(glyceryl methacrylate) hydrogel networks. J Appl Polym Sci 47:1207–1214CrossRefGoogle Scholar
  53. 53.
    Matyjaszewski K, Xia J (2001) Atom transfer radical polymerization. Chem Rev 101:2921–2990CrossRefGoogle Scholar
  54. 54.
    Stampel G, Cross R, Mariella R (1950) The preparation of acryloyl chloride. J Am Chem Soc 72:2299–2300CrossRefGoogle Scholar
  55. 55.
    Pilon LN, Armes SP, Findlay P, Rannard SP (2005) Synthesis and characterization of shell cross-linked micelles with hydroxy-functional coronas: a pragmatic alternative to dendrimers? Langmuir 21:3808–3813CrossRefGoogle Scholar
  56. 56.
    Zhu Z, Armes SP, Liu S (2005) pH-induced micellization kinetics of ABC triblock copolymers measured by stopped-flow light scattering. Macromolecules 38:9803–9812CrossRefGoogle Scholar
  57. 57.
    Weaver J, Bannister I, Robinson K, Bories-Azeau X, Armes S, Smallridge M, McKenna P (2004) Stimulus-responsive water-soluble polymers based on 2-hydroxyethyl methacrylate. Macromolecules 37:2395–2403CrossRefGoogle Scholar
  58. 58.
    Liu S, Weaver JV, Save M, Armes SP (2002) Synthesis of pH-responsive shell cross-linked micelles and their use as nanoreactors for the preparation of gold nanoparticles. Langmuir 18:8350–8357CrossRefGoogle Scholar
  59. 59.
    Beers KL, Boo S, Gaynor SG, Matyjaszewski K (1999) Atom transfer radical polymerization of 2-hydroxyethyl methacrylate. Macromolecules 32:5772–5776CrossRefGoogle Scholar
  60. 60.
    Save M, Weaver J, Armes S, McKenna P (2002) Atom transfer radical polymerization of hydroxy-functional methacrylates at ambient temperature: comparison of glycerol monomethacrylate with 2-hydroxypropyl methacrylate. Macromolecules 35:1152–1159CrossRefGoogle Scholar
  61. 61.
    Mckenzie A, Hoskins R, Swift T, Grant C, Rimmer S (2017) Core (polystyrene)–Shell [poly(glycerol monomethacrylate)] particles. ACS Appl Mater Interfaces 9:7577–7590CrossRefGoogle Scholar
  62. 62.
    Liu F, Liu G (2001) Poly(solketal methacrylate)-block-poly(2-cinnamoyloxyethyl methacrylate)-block-poly(allyl methacrylate): synthesis and micelle formation. Macromolecules 34:1302–1307CrossRefGoogle Scholar
  63. 63.
    Feng XS, Pan CY, Wang J (2001) Synthesis of 6-armed amphiphilic block copolymers with styrene and 2, 3-Dihydroxypropyl acrylate by atom transfer radical polymerization. Macromol Chem Phys 202:3403–3409CrossRefGoogle Scholar
  64. 64.
    Mori H, Hirao A, Nakahama S (1994) Protection and polymerization of functional monomers. 21. Anionic living polymerization of (2, 2-dimethyl-1, 3-dioxolan-4-yl) methyl methacrylate. Macromolecules 27:35–39CrossRefGoogle Scholar
  65. 65.
    Ma L, Geng H, Song J, Li J, Chen G, Li Q (2011) Hierarchical self-assembly of polyhedral oligomeric silsesquioxane end-capped stimuli-responsive polymer: from single micelle to complex micelle. J Phys Chem B 115:10586–10591CrossRefGoogle Scholar
  66. 66.
    Amado E, Augsten C, Mäder K, Blume A, Kressler J (2006) Amphiphilic water soluble triblock copolymers based on poly(2, 3-dihydroxypropyl methacrylate) and poly(propylene oxide): synthesis by atom transfer radical polymerization and micellization in aqueous solutions. Macromolecules 39:9486–9496CrossRefGoogle Scholar
  67. 67.
    Valkama S, Ruotsalainen T, Nykänen A, Laiho A, Kosonen H, Ten Brinke G, Ikkala O, Ruokolainen J (2006) Self-assembled structures in diblock copolymers with hydrogen-bonded amphiphilic plasticizing compounds. Macromolecules 39:9327–9336CrossRefGoogle Scholar

Copyright information

© The Polymer Society, Taipei 2018

Authors and Affiliations

  • Asad Ullah
    • 1
  • Syed Mujtaba Shah
    • 1
  • Hazrat Hussain
    • 1
  1. 1.Department of ChemistryQuaid-i-Azam University IslamabadIslamabadPakistan

Personalised recommendations