High-temperature superconducting (HTS) coils are key parts of many large-scale AC applications, such as transformers, superconducting magnetic energy storage, and motors. The estimation of AC losses of pancake coils is necessary for optimizing the design of HTS devices and cryogenic systems. To speed up the computation of AC losses, the numerical model of an infinitely long HTS stack is often utilized. An HTS stack is a good approximation of the circular coil only if the coil radius is sufficiently large, since AC losses will exhibit a stronger asymmetry along the radial direction for small values of coil radii. To assess the validation of an infinitely long stack approximation, the comparisons of AC losses between infinitely long stacks and circular coils with different radii are presented. The turn number varies from 10 to 80. We find that the AC losses of HTS circular coils will gradually increase to the same value as an infinitely long stack with increasing coil radii. A new parameter is proposed to quantitatively describe the correctness of infinitely long stack approximation. Finally, a method of AC loss estimation of HTS pancake coils is proposed.
AC loss Infinitely long stack Pancake coil YBCO Finite element model
This is a preview of subscription content, log in to check access.
The authors would like to acknowledge Dr. Hui Yu for her help in reading this manuscript and for providing valuable comments.
This work was supported in part by the National Natural Science Foundation of China under Grant 51677180 and in part by the Key Research Program of Frontier Science of the Chinese Academy of Sciences under Grant QYZDJ-SSW-JSC025.
Pardo, E. et al.: Ac loss modelling and measurement of superconducting transformers with coated-conductor Roebel-cable in low-voltage winding. Supercond. Sci. Technol. 28(11), 114008 (2015)ADSCrossRefGoogle Scholar
Liang, F. et al.: Experimental test of two types of non-inductive solenoidal coils for superconducting fault current limiters use. IEEE Trans. Appl. Supercond. 27(4), 1–5 (2017)CrossRefGoogle Scholar
Ainslie, M. et al.: Numerical analysis and finite element modelling of an HTS synchronous motor. Physica C: Superconductivity 470(20), 1752–1755 (2010)ADSCrossRefGoogle Scholar
Xing, D. et al.: AC loss comparison between multifilament and nonstriated YBCO coils designed for HTS propulsion motors. IEEE Trans. Appl. Supercond. 27(4), 1–5 (2017)CrossRefGoogle Scholar
Ainslie, M. D. et al.: An improved FEM model for computing transport AC loss in coils made of RABiTS YBCO coated conductors for electric machines. Supercond. Sci. Technol. 24(4), 045005 (2011)ADSCrossRefGoogle Scholar
Zhang, M. et al.: Experimental and numerical study of a YBCO pancake coil with a magnetic substrate. Supercond. Sci. Technol. 25(12), 125020 (2012)ADSCrossRefGoogle Scholar
Wang, L. et al.: Numerical simulation of AC loss in 2G high-temperature superconducting coils with 2D-axisymmetric finite element model by magnetic field formulation module. J. Supercond. Nov. Magn. 29(8), 2011–2018 (2016)CrossRefGoogle Scholar
Brambilla, R., Grilli, F., Martini, L.: Development of an edge-element model for AC loss computation of high-temperature superconductors. Supercond. Sci. Technol. 20(1), 16 (2007)ADSCrossRefGoogle Scholar
Zhang, M. et al.: Study of second generation, high-temperature superconducting coils: determination of critical current. J. Appl. Phys. 111(8), 083902 (2012)ADSCrossRefGoogle Scholar
Ainslie, M. D., Flack, T. J., Campbell, A. M.: Calculating transport AC losses in stacks of high temperature superconductor coated conductors with magnetic substrates using FEM. Physica C-Superconductivity and Its Applications 472(1), 50–56 (2012)ADSCrossRefGoogle Scholar
Yuan, W., Campbell, A. M., Coombs, T. A.: Ac losses and field and current density distribution during a full cycle of a stack of superconducting tapes. J. Appl. Phys. 107(9), 093909 (2010)ADSCrossRefGoogle Scholar
de Bruyn, B. J. H., Jansen, J. W., Lomonova, E. A.: Finite element model simplification methods for stacks of superconducting tapes. IEEE Trans. Magn. 52(7), 1–4 (2016)CrossRefGoogle Scholar
Yuan, W. et al.: Comparison of AC losses, magnetic field/current distributions and critical currents of superconducting circular pancake coils and infinitely long stacks using coated conductors. Supercond. Sci. Technol. 23(8), 085011 (2010)ADSCrossRefGoogle Scholar
Liu, G. et al.: Influence of substrate magnetism on frequency-dependent transport loss in HTS-coated conductors. IEEE Trans. Appl. Supercond. 27(8), 1–7 (2017)CrossRefGoogle Scholar
Liu, G. et al.: Experimental and numerical study of frequency-dependent transport loss in YBa2Cu3O7–δ coated conductors with ferromagnetic substrate and copper stabilizer. J. Appl. Phys. 121(24), 243902 (2017)ADSCrossRefGoogle Scholar
Liu, G. et al.: Numerical study on AC loss reduction of stacked HTS tapes by optimal design of flux diverter. Supercond. Sci. Technol. 30(12), 125014 (2017)ADSCrossRefGoogle Scholar
Weast, R. C.: CRC Handbook of Chemistry and Physics, p 1438. CRC Press, Inc, Boca Raton (2001)Google Scholar
Lu, J., Choi, E., Zhou, H.: Physical properties of HastelloyⓇ C-276™ at cryogenic temperatures. J. Appl. Phys. 103(6), 064908 (2008)ADSCrossRefGoogle Scholar
Kim, Y., Hempstead, C., Strnad, A.: Critical persistent currents in hard superconductors. Phys. Rev. Lett. 9(7), 306 (1962)ADSCrossRefGoogle Scholar