Hydroisomerization of n-hexadecane over Brønsted acid site tailored Pt/ZSM-12

Abstract

Hydroisomerization of n-hexadecane is performed over ZSM-12 framework having tailored Brønsted acidity to investigate the effect in terms of product selectivity and yield. For this purpose, pure phase of ZSM-12 (bulk molar ratio Si/Al ~ 60) has been synthesized using TEABr as a structure directing agent. The framework Brønsted acidity is tailored with group II elements (M) viz. Ca, Ba and Mg, by means of ion-exchange method. The samples so prepared have been characterized for phase purity, textural parameters, morphology by employing powder X-ray diffraction, nitrogen adsorption–desorption isotherm measurement at 77 K, and scanning electron microscopy technique, respectively. Similarly, % metal exchange is estimated using inductively coupled plasma technique. The quantification of Brønsted acidity for H⁺–M⁺⁺–ZSM-12 samples has been estimated by means of ammonia temperature programmed desorption (NH₃-TPD) and Fourier transform infrared spectroscopy of ammonia (NH₃-FTIR). The well characterized H⁺–M⁺⁺–ZSM-12 samples were loaded with Platinum (Pt, 0.5 wt%) and subjected to hydroisomerization of n-hexadecane using an up-flow fixed bed reactor to verify the effect of process parameters like temperature and WHSV. Pt/H⁺–Ba²⁺–ZSM-12 with tailored Brønsted acidity in the range of about 25 % demonstrated the optimum performance among all the catalysts with an increased isomer selectivity and yield (89.2 and 80.3 %, respectively) by about 4 wt% at a conversion level of about 90 % compared to Pt/H⁺–ZSM-12 framework at 568 K. Such enhancement in isomer selectivity and yield is found to be significant from commercial application point of view. Based on the obtained trend, the potential benefits of implementation of Pt/H⁺–Ba²⁺–ZSM-12 (bulk molar ratio Si/Al ~ 60) framework for cold flow property improvement of ‘bio-ATF’ have been envisaged.