Advertisement

Journal of Polymers and the Environment

, Volume 26, Issue 9, pp 4013–4018 | Cite as

Development of Biocomposite Superabsorbent Nanomaterials: Effect of Processing Technique

  • M. Felix
  • I. Martínez
  • J. M. Aguilar
  • A. Guerrero
Brief Communication
  • 74 Downloads

Abstract

Nanoclay particles have been usually introduced into protein-based bioplastics to obtain composite materials, showing enhanced mechanical properties. However, the addition of partially exfoliated nanoclay particles in these protein matrices may also involve an increase of others properties such as water absorption capacity, which may lead to the obtention of super absorbent biodegradable materials. Processing technologies exerted a remarkable influence on the techno-functional properties of the soy-based bioplastics studied in this research. On the one hand, extrusion technique led to bioplastics which showed enhanced mechanical properties. On the other hand, injection moulding technique yielded to non-exfoliated nanoclay particles within the protein matrix, which involved improvements of water absorption capacity. The development of superabsorbent protein-based biodegradable materials implied a deep knowledge of physicochemical properties of proteins and processing conditions of bioplastics. Extrusion or injection moulding techniques could be selected to obtain tailored protein-based bioplastics with enhanced properties.

Keywords

Biopolymer processing Mechanical properties Montmorillonite Proteins Water absorption capacity 

Notes

Acknowledgements

This work is part of a research project sponsored by MINECO/FEDER, “Ministerio de Economía y Competitividad”, from the Spanish Government (Ref. CTQ2015-71164-P). The authors also acknowledge University of Seville for a grant supported by VPPI-US.

References

  1. 1.
    Blanke MM (2014) Reducing ethylene levels along the food supply chain: a key to reducing food waste? J Sci Food Agric 94:2357–2361CrossRefPubMedGoogle Scholar
  2. 2.
    Stanzione J, La Scala J (2016) Sustainable polymers and polymer science: dedicated to the life and work of Richard P. Wool. J Appl Polym Sci 133:n/aCrossRefGoogle Scholar
  3. 3.
    Plastics-Europe (2017) World oceans day: why the protection of oceans is a top priority. https://www.plasticseurope.org/en/newsroom/news/world-oceans-day-why-protection-oceans-top-priority. Accessed 01 Mar 2018
  4. 4.
    Verbeek CJR, van den Berg LE (2011) Development of proteinous bioplastics using bloodmeal. J Polym Environ 19:1–10CrossRefGoogle Scholar
  5. 5.
    Álvarez-Chávez CR, Edwards S, Moure-Eraso R, Geiser K (2012) Sustainability of bio-based plastics: general comparative analysis and recommendations for improvement. J Clean Prod 23:47–56CrossRefGoogle Scholar
  6. 6.
    Felix M, Perez-Puyana V, Romero A, Guerrero A (2016) Production and characterization of bioplastics obtained by injection moulding of various protein systems. J Polym Environ 25:1–10Google Scholar
  7. 7.
    Chove BE, Grandison AS, Lewis MJ (2002) Emulsifying properties of soy protein isolates obtained by microfiltration. J Sci Food Agric 82:267–272CrossRefGoogle Scholar
  8. 8.
    Creusot N, Wierenga PA, Laus MC et al (2011) Rheological properties of patatin gels compared with β-lactoglobulin, ovalbumin, and glycinin. J Sci Food Agric 91:253–261CrossRefPubMedGoogle Scholar
  9. 9.
    Tian H, Wang Y, Zhang L et al (2010) Improved flexibility and water resistance of soy protein thermoplastics containing waterborne polyurethane. Ind Crops Prod 32:13–20CrossRefGoogle Scholar
  10. 10.
    Low A, Verbeek CJR, Lay MC (2014) Treating bloodmeal with peracetic acid to produce a bioplastic feedstock. Macromol Mater Eng 299:75–84CrossRefGoogle Scholar
  11. 11.
    Felix M, Romero A, Cordobes F, Guerrero A (2015) Development of crayfish bio-based plastic materials processed by small-scale injection moulding. J Sci Food Agric 95:679–687CrossRefPubMedGoogle Scholar
  12. 12.
    Ture H, Gallstedt M, Kuktaite R et al (2011) Protein network structure and properties of wheat gluten extrudates using a novel solvent-free approach with urea as a combined denaturant and plasticiser. Soft Matter 7:9416–9423CrossRefGoogle Scholar
  13. 13.
    Jerez A, Partal P, Martinez I et al (2005) Rheology and processing of gluten based bioplastics. Biochem Eng J 26:131–138CrossRefGoogle Scholar
  14. 14.
    Günister E, Pestreli D, Ünlü CH et al (2007) Synthesis and characterization of chitosan-MMT biocomposite systems. Carbohydr Polym 67:358–365CrossRefGoogle Scholar
  15. 15.
    Strawhecker KE, Manias E (2000) Structure and properties of poly(vinyl alcohol)/Na+ montmorillonite nanocomposites. Chem Mater 12:2943–2949CrossRefGoogle Scholar
  16. 16.
    Felix M, Martinez I, Romero A et al (2018) Effect of pH and nanoclay content on the morphology and physicochemical properties of soy protein/montmorillonite nanocomposite obtained by extrusion. Compos B 140:197–203CrossRefGoogle Scholar
  17. 17.
    Chen Z, Feng R (2009) Preparation and characterization of poly(styrene-b-butadiene-b-styrene)/montmorillonite nanocomposites. Polym Compos 30:281–287CrossRefGoogle Scholar
  18. 18.
    Türe H, Blomfeldt TOJ, Gällstedt M, Hedenqvist MS (2012) Properties of wheat-gluten/montmorillonite nanocomposite films obtained by a solvent-free extrusion process. J Polym Environ 20:1038–1045CrossRefGoogle Scholar
  19. 19.
    Amin A, Ahmed EH, Sabaa MW et al (2016) Preparation and evaluation of hyperbranched p-chloromethyl styrene polymers/montmorillonite clay nanocomposites as dielectric materials. Polym Bull 73:147–162CrossRefGoogle Scholar
  20. 20.
    Hua J, Liu J, Wang X et al (2017) Structure and properties of a cis-1,4-polybutadiene/organic montmorillonite nanocomposite prepared via in situ polymerization. J Macromol Sci B 56:451–461CrossRefGoogle Scholar
  21. 21.
    Diañez I, Martínez I, Partal P (2016) Synergistic effect of combined nanoparticles to elaborate exfoliated egg-white protein-based nanobiocomposites. Compos Part B: Eng 88:36–43CrossRefGoogle Scholar
  22. 22.
    Quigley JP, Baird DG (2015) Improved mechanical properties of organoclay/nylon 6 nanocomposites prepared via a supercritical carbon dioxide-aided, melt blending method. Polym Compos 36:527–537CrossRefGoogle Scholar
  23. 23.
    Hietala M, Mathew AP, Oksman K (2013) Bionanocomposites of thermoplastic starch and cellulose nanofibers manufactured using twin-screw extrusion. Eur Polym J 49:950–956CrossRefGoogle Scholar
  24. 24.
    Fu X, Qutubuddin S (2001) Polymer–clay nanocomposites: exfoliation of organophilic montmorillonite nanolayers in polystyrene. Polymer 42:807–813. doiCrossRefGoogle Scholar
  25. 25.
    Jovanovich G, Puppo MC, Giner SA, Añón MC (2003) Water uptake by dehydrated soy protein isolates: comparison of equilibrium vapour sorption and water imbibing methods. J Food Eng 56:331–338CrossRefGoogle Scholar
  26. 26.
    Essawy HA, El-Sabbagh SH, Tawfik ME (2015) Novel interpenetrating amphiphilic Co-networks based on compatibilized NBR/SBR-montmorillonite composites: a study on the oil absorption characteristics. Polym Compos 36:1494–1501CrossRefGoogle Scholar
  27. 27.
    Chivrac F, Pollett E, Schmutz M, Averous L (2008) New approach to elaborate exfoliated starch-based nanobiocomposites. Biomacromology 9:896–900CrossRefGoogle Scholar
  28. 28.
    Peng IC, Quass DW, Dayton WR, Allen CE (1984) The physicochemical and functional-properties of soybean 11 s globulin—a review. Cereal Chem 61:480–490Google Scholar
  29. 29.
    Cuadri AA, Romero A, Bengoechea C, Guerrero A (2017) Natural superabsorbent plastic materials based on a functionalized soy protein. Polym Test 58:126–134CrossRefGoogle Scholar
  30. 30.
    Ulrichs T, Drotleff AM, Ternes W (2015) Determination of heat-induced changes in the protein secondary structure of reconstituted livetins (water-soluble proteins from hen’s egg yolk) by FTIR. Food Chem 172:909–920CrossRefPubMedGoogle Scholar
  31. 31.
    Zohdi V, Whelan DR, Wood BR et al (2015) Importance of tissue preparation methods in FTIR micro-spectroscopical analysis of biological tissues: traps for new users. PLoS ONE 10:1–11CrossRefGoogle Scholar
  32. 32.
    Spada JC, Marczak LDF, Tessaro IC, Cardozo NSM (2015) Interactions between soy protein from water-soluble soy extract and polysaccharides in solutions with polydextrose. Carbohydr Polym 134:119–127CrossRefPubMedGoogle Scholar
  33. 33.
    Liu H, Li C, Sun XS (2015) Improved water resistance in undecylenic acid (UA)-modified soy protein isolate (SPI)-based adhesives. Ind Crops Prod 74:577–584CrossRefGoogle Scholar
  34. 34.
    Wang L, Mogami S, Karasawa H et al (2014) Preventive effect of rikkunshito on gastric motor function inhibited by l-dopa in rats. Peptides 55:136–144CrossRefPubMedPubMedCentralGoogle Scholar
  35. 35.
    Bunaciu A, Fleschin A, Aboul-Enein SY H (2014) Infrared microspectroscopy applications-review. Curr Anal Chem 10:132–139CrossRefGoogle Scholar
  36. 36.
    Fan F, Roos YH (2017) Glass transition-associated structural relaxations and applications of relaxation times in amorphous food solids: a review. Food Eng Rev 9:257–270CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Universidad de SevillaSevilleSpain
  2. 2.Dpto. Ingeniería Química, Centro de Investigación en Tecnología de Productos y Procesos Químicos (Pro2TecS)Universidad de Huelva-Campus Excelencia CeiA3HuelvaSpain

Personalised recommendations