Journal of Polymers and the Environment

, Volume 21, Issue 4, pp 1016–1025 | Cite as

Hydrolytic Degradation of PPDO/PDLLA Blends Containing the Compatibilizer PLADO

  • Yang Bai
  • Pingya Luo
  • Pingquan Wang
  • Wei Bai
  • Chengdong Xiong
  • Congming Tang
Original Paper

Abstract

The poly(para-dioxanone) (PPDO)/poly poly (dl-lactide) (PDLLA) blends containing various contents of compatibilizer (0, 1, 3, 5, 10 %) were prepared by solution co-precipitation, which were dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) to form 10 % wt/vol solutions. Then in vitro hydrolytic degradation of PPDO/PDLLA blends containing poly (dl-lactide-co-para-dioxanone) (PLADO) as the compatibilizer was studied by the changes of weight loss, water absorption, thermal properties, surface morphology and mechanical properties of samples in phosphate buffered saline (pH 7.44) at 37 °C for 8 weeks. During the degradation, the weight loss and water absorption increased significantly for all blends, whereas hydrolysis rate of blends varied with the blend composition. The samples’ glass transition temperature decreased notably, while the degrees of crystallinity increased. Compared with uncompatibilized PPDO/PDLLA blends, PPDO/PDLLA blends with compatibilizer exhibited higher hydrolysis rate. The results suggested that the compatibilizer (PLADO) accelerated the hydrolysis rate of PPDO/PDLLA blends during the degradation.

Keywords

Biomaterials Compatibilizer PPDO/PDLLA Blends In vitro hydrolytic degradation 

Notes

Acknowledgments

This work was supported by the National Natural Science Foundation of China (51103156), Chemical Synthesis and Pollution Control Key Laboratory of Sichuan Province, College of Chemistry and Chemical Engineering, China West Normal University (CSPC2012-7), and the West Light Foundation of The Chinese Academy of Sciences.

References

  1. 1.
    Chen SC, Li LL, Wang H, Wu G, Wang YZ (2012) Polym Chem 3:1231–1238CrossRefGoogle Scholar
  2. 2.
    Niu Y, Zhang P, Zhang JJ, Xiao LP, Yang KK, Wang YZ (2012) Polym Chem 3:2508–2516CrossRefGoogle Scholar
  3. 3.
    Wang XL, Zhai YL, Tang DL, Liu GY, Wang YZ (2012) J Polym Res 19:9946–9955CrossRefGoogle Scholar
  4. 4.
    Marimuthu M, Kim S, An J (2010) Soft Matter 6:2200–2207CrossRefGoogle Scholar
  5. 5.
    Bajgai MP, Parajuli DC, Ko JA, Kang HK, Khil MS, Kim HY (2009) Carbohydr Polym 78:833–840CrossRefGoogle Scholar
  6. 6.
    Zubitur M, Mugica A, Areizaga J, Cortazar M (2010) Colloid Polym Sci 288:809–818CrossRefGoogle Scholar
  7. 7.
    Feng QM, Jiang WB, Sun K, Kang S, Chen S, Zhao LJ, Dai K, Ma N (2011) J Mater Sci Mater Med 22:2319–2327CrossRefGoogle Scholar
  8. 8.
    Bai W, Chen DL, Li Q, Zhang ZP, Xiong CD (2009) Prog Chem 21:2696–2703 (in Chinese)Google Scholar
  9. 9.
    Bai W, Zhang ZP, Li Q, Chen DL, Chen HC, Zhao N, Xiong CD (2009) Polym Int 58:183–189CrossRefGoogle Scholar
  10. 10.
    Bai W, Li Q, Jiang LY, Zhang ZP, Zhang SL, Xiong CD (2011) J Appl Polym Sci 120:544–551CrossRefGoogle Scholar
  11. 11.
    Bai W, Zhang LF, Li Q, Chen DL, Xiong CD (2010) Mater Chem Phys 122:79–86CrossRefGoogle Scholar
  12. 12.
    Bai Y, Ma C, Wang PQ, Fan Z, Bai W, Xiong CD, Tang CM (2012) Polym Compos 33:1770–1776CrossRefGoogle Scholar
  13. 13.
    Zhang LL, Xiong CD, Deng XM (1995) J Appl Polym Sci 56:103–112CrossRefGoogle Scholar
  14. 14.
    Bai W, Chen DL, Li Q, Zhang ZP, Xiong ZC, Chen HC, Xiong CD (2009) Acta Polym Sin (1):78–83 (in Chinese)Google Scholar
  15. 15.
    Schindler M, Harper D (1979) J Polym Sci Polym Chem 17:2593–2600CrossRefGoogle Scholar
  16. 16.
    Sabino MA, Feijoo JL, Müller AJ (2000) Macromol Chem Phys 18:2687–2698CrossRefGoogle Scholar
  17. 17.
    Zhao HZ, Hao JY, Xiong CD, Deng XM (2009) Chin Chem Lett 20:1506–1509CrossRefGoogle Scholar
  18. 18.
    Ma ZG, Zhao N, Xiong CD (2012) Bull Mater Sci 35:575–578CrossRefGoogle Scholar
  19. 19.
    Prasanna K, Ssilaja RRN (2012) J Appl Polym Sci 124:3264–3275CrossRefGoogle Scholar
  20. 20.
    Rosa DS, Bardi MAG, Guedes CGF, Angelis DA (2009) Polym Adv Technol 20:863–870CrossRefGoogle Scholar
  21. 21.
    Terao K, Miyake J, Watanabe J, Ikeda Y (2012) Mater Sci Eng C 32:988–993CrossRefGoogle Scholar
  22. 22.
    Adamus A, Wach RA, Olejnik AK, Dzierzawska J, Rosiak JM (2012) Polym Degrad Stab 97:532–540CrossRefGoogle Scholar
  23. 23.
    Ren J, Fu HY, Ren TB, Yuan WZ (2009) Carbohydr Polym 77:576–582CrossRefGoogle Scholar
  24. 24.
    Dong WF, Li HL, Chen MQ, Ni ZB, Zhao JS, Yang HP, Gijsman P (2011) J Polym Res 18:1239–1247CrossRefGoogle Scholar
  25. 25.
    Zhang LL, Xiong CD, Deng XM (1996) Polymer 37:235–241CrossRefGoogle Scholar
  26. 26.
    Ishikiriyama K, Pyda M, Zhang G, Forschner T, Grebowicz J, Wunderlich B (1998) J Macromol Sci Phys B B37:27–44CrossRefGoogle Scholar
  27. 27.
    Zhang XF, Hua H, Shen XY, Yang Q (2007) Polymer 48:1005–1011CrossRefGoogle Scholar
  28. 28.
    Ding SD, Zheng GC, Zeng JB, Zhang L, Li YD, Wang YZ (2009) Euro Polym J 45:3043–3057CrossRefGoogle Scholar
  29. 29.
    Zhao N, Ma ZG, Xiong CD (2012) Int J Polym Mater 61:587–595CrossRefGoogle Scholar
  30. 30.
    Bonartsev AP, Boskhomodgiev AP, Iordanskii AL, Bonartseva GA, Rebrov AV, Makhina TK, Myshkina VL, Yakovlev SA, Filatova EA, Ivanov EA, Bagrov DV, Zaikov GE (2012) Mol Cryst Liq Cryst 556:288–300CrossRefGoogle Scholar
  31. 31.
    Li J, Jiang ZQ, Wang ZB, Chen P, Li Y, Zhou J, Liu J, Wang YZ, Gu Q (2011) Polym Degrad Stab 96:991–999CrossRefGoogle Scholar
  32. 32.
    Tsuji H, Tsuruno T (2010) Polym Degrad Stab 95:477–484CrossRefGoogle Scholar
  33. 33.
    Gaona LA, Ribelles JLG, Perilla JE, Lebourg M (2012) Polym Degrad Stab 97:1621–1632CrossRefGoogle Scholar
  34. 34.
    Lee JB, Lee YK, Choi GD, Na SW, Park TS, Kim WN (2011) Polym Degrad Stab 96:553–560CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 2013

Authors and Affiliations

  • Yang Bai
    • 1
  • Pingya Luo
    • 1
  • Pingquan Wang
    • 1
  • Wei Bai
    • 1
    • 2
    • 3
  • Chengdong Xiong
    • 2
  • Congming Tang
    • 3
  1. 1.State Key Laboratory of Oil and Gas Reservoir Geology and ExploitationSouthwest Petroleum UniversityChengduPeople’s Republic of China
  2. 2.Chengdu Institute of Organic ChemistryChinese Academy of SciencesChengduPeople’s Republic of China
  3. 3.Chemical Synthesis and Pollution Control Key Laboratory of Sichuan Province, College of Chemistry and Chemical EngineeringChina West Normal UniversityNanchongPeople’s Republic of China

Personalised recommendations