Advertisement

Journal of Polymers and the Environment

, Volume 18, Issue 3, pp 384–400 | Cite as

Critical Review of Norms and Standards for Biodegradable Agricultural Plastics Part Ι. Biodegradation in Soil

  • Demetres Briassoulis
  • Cyril Dejean
Original Paper

Abstract

A critical review of norms and standards and corresponding tests to determine the biodegradability in soil for biodegradable plastics, possibly applicable also to biodegradable agricultural plastics, is presented. There are only a few norms available at the international level about biodegradable plastics in soil. The criteria, parameters and testing methodologies for the characterization, labelling and validation of the agricultural plastic waste streams with respect to possible biodegradation in soil according to existing international standards are analysed while the relevant controversies are identified. To derive the best suited for agricultural plastics specs and testing methods, the possible developments or adaptation of available specs, is investigated. Considering the existing types of biodegradable plastic products in agriculture and their effective life management at the agricultural field, only a few norms appear to provide suitable tests that could be adapted, following appropriate research work, for testing biodegradability in soil under real field conditions. It is shown that some major revisions are needed, with the support of systematic research work, before a new universal norm and standard testing methods become available for testing agricultural plastics for biodegradation under real, and highly variable, soil conditions. Based on the analysis of the different norms and their content it appears necessary to incorporate provisions for transferability of results to different soils and climates, validation of tests through a positive reference and also, set prerequisites for soil media. Long term biodegradation in soil prediction is another open issue.

Keywords

Biodegradable agricultural plastics Biodegradability in soil Testing methods Norms Labelling 

Notes

Acknowledgements

The present work has been supported by the European ‘Labelling agricultural plastic waste for valorising the waste stream’, Collective research, LABELAGRIWASTE, Contract no. 516256-2. Special thanks are due to Novamont S.p.A. staff for the technical support offered on the management in soil media with respect to air flow diffusion and moisture content regulation.

References

  1. 1.
    Bos U, Makishi C, Fischer M (2007) Life Cycle Assessment of Common Used Agricultural Plastic Products in the EU, ISHS Acta Horticulturae 801: International Symposium on High Technology for Greenhouse System Management: Greensys2007Google Scholar
  2. 2.
    LABELAGRIWASTE, Labelling agricultural plastic waste for valorising the waste stream, Sixth Framework Programme, Horizontal Research Activities involving SMEs Collective Research. http://labelagriwaste.aua.gr
  3. 3.
    European Plastics Converters, Plastics for Agriculture, EuPC, Avenue de Cortenbergh, 66 P.O. Box 4, 1000 Brussels—Belgium, http://www.plasticsconverters.eu/markets/agriculture
  4. 4.
    Comite International des Plastiques en Agriculture (C.I.P.A.), Paris, FranceGoogle Scholar
  5. 5.
    Briassoulis D, Hiskakis M, Scarascia G, Picuno P, Delgado C, Dejean C (2010) Quality Assurance and Safety of Crops & Foods, in printGoogle Scholar
  6. 6.
    Lamont WJ (1996) HortTech 6(3):150–154Google Scholar
  7. 7.
    González A, Fernández JA, Martín P, Rodríguez R, López J, Bañón S, Franco JA (2003) Behaviour of biodegradable film for mulching in open-air melon cultivation in South-East Spain, KTBL-Schrift, pp 71–77Google Scholar
  8. 8.
    Briassoulis D, Liantzas K, Hiskakis M (2008) Management of Agricultural Plastic Waste (APW)—A Pilot Test in Greece. In: Proceedings of EurAgEng 2008, Hersonissos, Crete, 23–26 June, 2008Google Scholar
  9. 9.
    Hiskakis M, Babou E, Briassoulis D, Marseglia A, Godosi Z, Liantzas K (2008) Recycling Specs for Agricultural Plastic Waste (APW)—A Pilot Test In Greece and in Italy. In: Proceedings of EurAgEng 2008, Hersonissos, Crete, 23–26 June, 2008Google Scholar
  10. 10.
    Hiskakis M, Briassoulis D, Teas C, Babou E, Liantzas K (2008) Using Agricultural Plastic Waste (APW) as Alternative Solid Fuel (ASF) for Energy Recovery in a Cement Industry Kiln—A Pilot Test. In: Proceedings of EurAgEng 2008, Hersonissos, Crete, 23–26 June, 2008Google Scholar
  11. 11.
    Hiskakis M, Briassoulis D (2006) Design of Agricultural Plastic Waste (APW) Chain for Greece from Generation to Disposal; A Pilot Test for Energy Recovery”, World Congress of Agricultural Engineering, 3–7 September 2006, Bonn, GermanyGoogle Scholar
  12. 12.
    Nayak PL (1999) Rev Macromol Chem Phys 39:481–505Google Scholar
  13. 13.
    Wang XL, Yang KK, Wang YZ (2003) J Macromol Sci—Pol Rev 43:385–409Google Scholar
  14. 14.
    Gross RA, Kalra B (2002) Green Chem 297:803–807Google Scholar
  15. 15.
    Briassoulis D (2004) J Polym Envirom 12(2):65–81CrossRefGoogle Scholar
  16. 16.
    Japan Environment Association (2007) Biodegradable Plastic Products Version 1.0 Certification Criteria. Eco Mark Office. http://www.ecomark.jp/english/pdf/141eC1.pdf. Accessed 16 April 2009
  17. 17.
    The Technology Roadmap for Plant/Crop-Based Renewable Resources 2020; Research Priorities for Fulfilling a Vision to Enhance U.S. Economic Security Through Renewable Plant/Crop-Based Resource Use, Renewables Vision 2020 Executive Steering Group, DOE/GO-10099-706, February 1999, http://www.oit.doe.gov/agriculture/
  18. 18.
    European Bioplastics e.V. http://www.european-bioplastics.org/. Accessed 16 April 2009
  19. 19.
    A Lead Market Initiative for Europe, ANNEX I, Action plan of the lead market initiative in the area of bio-based products, Brussels, 21.12.2007, SEC(2007) 1729Google Scholar
  20. 20.
    Krzan V, Hemjinda S, Miertus S, Corti A, Chiellini E (2006) Polym Degrad Stabil 91:2819–2833CrossRefGoogle Scholar
  21. 21.
    Grima S, Bellon-Maurel V, Silvestre F, Feuilloley P (2001) J Polym Environ 9(1):39–48CrossRefGoogle Scholar
  22. 22.
    Drımal P, Hoffmann J, Druzbık M (2007) Polym Testing 26:729–741CrossRefGoogle Scholar
  23. 23.
    Briassoulis D, Dejean C, Picuno P. Critical Review of Norms and Standards for Biodegradable Agricultural Plastics; Part II. Composting, submitted for publicationGoogle Scholar
  24. 24.
    Kyrikou I, Briassoulis D (2007) J Polym Environ 15(2):125–150CrossRefGoogle Scholar
  25. 25.
    Olabisi O, Robinson LM, Show MT (1979) Polymer–polymer miscibility. Academic press, New YorkGoogle Scholar
  26. 26.
    Chandra R, Rustgi R (1998) Program Polym Sci 23:1273–1335CrossRefGoogle Scholar
  27. 27.
    Xiao C, Lu Y, Liu H, Zhang L (2000) J Macromol Sci A 37:1663–1675CrossRefGoogle Scholar
  28. 28.
    Halley P, Rutgers R, Coombs S, Gralton J, Jenkins M, Beh H, Griffin K, Jayasekara R, Lonergan G (2001) Starch 53:362–367CrossRefGoogle Scholar
  29. 29.
    Kaplan DL, Mayer JM, Greenberger M, Gross RA, McCarthy S (1994) Polym Degrad Stabil 45:165–172CrossRefGoogle Scholar
  30. 30.
  31. 31.
    APME, Federchimica Assoplast, BPF, Syndicat des producteurs de matieres plastiques, Biodegradable plastics, October 2001Google Scholar
  32. 32.
    Feuilloley P (2004) La Recherche 374:52–54Google Scholar
  33. 33.
    Fritz J (2003) Macromol Symp 197:397–409CrossRefGoogle Scholar
  34. 34.
    Scott G, Gilead D (1995) Degradable polymers: Principles and applications, Chapter 13. Chapman & HallGoogle Scholar
  35. 35.
    Thompson RC, Olsen Y, Mitchell RP, Davis A, Rowland SJ, John AWG et al (2004) Science 304:838CrossRefGoogle Scholar
  36. 36.
    Narayan R. Standards for biobased products, MSU Chemical Engineering and Materials Science, USAGoogle Scholar
  37. 37.
    Feuilloley P, César G, Benguigui L, Grohens Y, Pillin I, Bewa H, Lefaux S, Jamal M (2005) J Polym Environ 13(4):349–355CrossRefGoogle Scholar
  38. 38.
    Narayan R, Pettigrew (1999) ASTM Standards Help Define and Grow a New Biodegradable Plastics Industry, ASTM Standardization News, December, 1999, p 36; Invited ArticleGoogle Scholar
  39. 39.
    ASTM Technical Committees/Committee D20 on Plastics/Committee D20.96 on Environmentally Degradable Plastics and Biobased Products, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USAGoogle Scholar
  40. 40.
    ASTM D 5988-03, Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting, Edition:2003Google Scholar
  41. 41.
    Modelli M, Calcagno B, Scandola M (1999) J Polym Environ 7(2):109–116CrossRefGoogle Scholar
  42. 42.
    Modelli M, Salib A, Galletti P, Samorì C (2008) Chemosphere 73(8):1322–1327CrossRefGoogle Scholar
  43. 43.
    ISO technical committee TC 61/SC 5 Physical-chemical properties, ISO/TC 061 Plastics, International Organization for Standardization (ISO) 1, ch. de la Voie-Creuse, Case postale 56 CH-1211 Geneva 20, SwitzerlandGoogle Scholar
  44. 44.
    ISO 17556:2003, Plastics—Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved, International Organization for Standardization/01-Aug-2003Google Scholar
  45. 45.
    ISO 8192:2007, Water quality—Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation, International Organization for Standardization/01-Jan-2007Google Scholar
  46. 46.
    NF U52-001 February 2005: Biodegradable materials for use in agriculture and horticulture-mulching products-Requirements and test methodsGoogle Scholar
  47. 47.
    Eubeler JP, Bernhard M, Zok S, Knepper TP (2009) Trends Anal Chem 28:1057CrossRefGoogle Scholar
  48. 48.
    De Wilde B (2002), Standardisation Activities Related to Measuring Biodegradability of Plastics in Soil and Marine Conditions, presentation in International Conference “Industrial Applications of Bioplastics” York, United Kingdom 3, 4 & 5 February 2002Google Scholar
  49. 49.
    SP Technical Research Institute of Sweden Appendix 4 to SPCR 141 Polymeric waste degradable by abiotic and subsequent biological degradation—requirements and test methods. November 2007 SP Box 857 SE-501 15 Borås SWEDENGoogle Scholar
  50. 50.
    Novamont S.p.A. http://www.materbi.com. Accessed 16 April 2009
  51. 51.
    Lowenfels J, Lewis W (2006) Teaming with microbes a Gardeners guide to the soil food web Timber Press, 196 pp., ISBN10: 0881927775Google Scholar
  52. 52.
    Nishide H, Toyota K, Kimura M (1999) Soil Sci Plant Nutr 45(4):936–972Google Scholar
  53. 53.
    Shin PK, Eun JJ (1999) J Microbiol Biotechnol 9(6):784–788Google Scholar
  54. 54.
    Hoshino A, Swada H, Yokota M, Tsuji M, Fukuda K, Kimura M (2001) Soil Sci Plant Nutr 47(1):35–43Google Scholar
  55. 55.
    Vinçotte. http://www.aib-vincotte.com/en/home/. Accessed 3 March 2010
  56. 56.
    Chiellini E, Corti A, Antone SD, Billingham NC (2007) J Polym Environ 15(3):169–178CrossRefGoogle Scholar
  57. 57.
    Narayan R. Biodegradability principles & concepts, MSU Chemical Engineering and Materials Science, USAGoogle Scholar
  58. 58.
    Narayan R (2009) BioPlast Mag 4:28–31Google Scholar
  59. 59.
    EN 13432: 2000/AC:2005—European Committee for Standardization. EN 13432. Packaging—Requirements for Packaging Recoverable Through Composting And Biodegradation-Test Scheme And Evaluation Criteria For The Final Acceptance Of Packaging, European Standard, European Committee for Standardization, Brussels, Belgium 2005Google Scholar
  60. 60.
    EN 14995-2006, Plastics—Evaluation of compostability—Test scheme and specifications, Edition: 2006Google Scholar
  61. 61.
    ISO 11269-2:2005, Soil quality—Determination of the effects of pollutants on soil flora—Part 2: Effects of chemicals on the emergence and growth of higher plants, International Organization for Standardization/01-Nov-2005/Google Scholar
  62. 62.
    ISO 11268-1:1993, Soil Quality—Effects of pollutants on earthworms (Eisenia Fetida) Part1: Detemination of acute toxicity using artificial soil substrate International Organization for Standardization/1993Google Scholar
  63. 63.
    AFNOR NF T 90-375. Water quality—determination of water chronic toxicity by growth inhibition of the freshwater algae Pseudokirchneriella subcapitata (Selenastrum capricornutum). Saint Denis: Association Française de Normalisation; 1998 [13 pp.]Google Scholar
  64. 64.
    UNI EN 14995:2006 (E)-PlasticsEvaluation of compostability—test scheme and specifications. UNI (Italian Unification Agency), Milano, 2007Google Scholar
  65. 65.
    CEN/TC 249, EN 13206:2002. Covering thermoplastic films for use in agriculture and horticultureGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2010

Authors and Affiliations

  1. 1.Department of Agricultural EngineeringAgricultural University of AthensAthensGreece
  2. 2.Research Unit on Technology for Agro Processes, CemagrefMontpellierFrance

Personalised recommendations