The Effects of Nitrogen on Structure, Morphology and Electrical Resistance of Tantalum by Ion Implantation Method
- 52 Downloads
Abstract
In this paper, samples of tantalum with purities of 99.99% (0.58 mm thickness) were implanted by Nitrogen ions. The ions’ implantation process was performed at 30 keV and also at different portions which were in the range between 1 × 1017 and 1 × 1018 ions/cm2. The electrical characteristics were investigated on tantalum nitrides and Ta structures by current–voltage. The samples’ surface morphology was also studied through the atomic force microscopy. Through the application of the X-ray diffraction technique, the microstructure of the modified surfaces was obtained after ion implantation. Results of the experiments show the formation of hexagonal tantalum nitride (TaN0.43), as well as the fact that ion dose increases, more interstitial spaces are occupied by nitrogen atoms in the target crystal. The electrical resistivity of the tantalum after nitrogen implantation is found to increase with ion doses. Experimental data demonstrated that different nitrogen dose in ion beam powerfully affects microstructure, phase formation, surface morphology and resistivity of the tantalum. The changes in nitrogen ions were found to be responsible for variation in the resistivity values.
Keywords
Tantalum Ion implantation XRD AFM Electrical resistivityNotes
Acknowledgements
We would like to thank the department of plasma physic research at Research and Science Branch of Islamic Azad University for providing the ion implantation for synthesis and AFM and XRD devices for analysis.
References
- 1.A.S. Abd-El-Aziz, C.E. Carraher, C.U. Pittman, M. Zeldin (eds.), Inorganic and Organometallic Macromolecules (Springer-Verlag, New York, 2008)Google Scholar
- 2.P. Budzyński, P. Tarkowski, E. Jartych, A.P. Kobzev, Vacuum 63, 737 (2001)CrossRefGoogle Scholar
- 3.Y. Liu, X. Zu, S. Qiu, X. Huang, Rare Met. 25, 309 (2006)CrossRefGoogle Scholar
- 4.D. Shikha, U. Jha, S.K. Sinha, P.K. Barhai, K.G.M. Nair, S. Dash, A.K. Tyagi, S. Kalavathy, D.C. Kothari, Surf. Coat. Technol. 203, 2541 (2009)CrossRefGoogle Scholar
- 5.M. Zeldin, Acad. Press-Harcourt Sci. Technol. 12, 1 (2002)Google Scholar
- 6.V.I. Lavrentiev, A.D. Pogrebnjak, Surf. Coat. Technol. 99, 24 (1998)CrossRefGoogle Scholar
- 7.H.K. Sanghera, J.L. Sullivan, S.O. Saied, Appl. Surf. Sci. 141, 57 (1999)CrossRefGoogle Scholar
- 8.A.H. Ramezani, M.R. Hantehzadeh, M. Ghoranneviss, E. Darabi, Corros. Eng. Sci. Technol. 51, 393 (2016)CrossRefGoogle Scholar
- 9.A.H. Ramezani, M. Ghoranneviss, A. Shokouhy, A. Sari, J. Fusion Energy 30, 64 (2011)CrossRefGoogle Scholar
- 10.M. Zeldin, J. Inorg. Organomet. Polym. 11, 63 (2001)CrossRefGoogle Scholar
- 11.A.H. Ramezani, A.H. Sari, A. Shokouhy, Int. Nano Lett. 7, 57 (2017)CrossRefGoogle Scholar
- 12.M. Zeldin, E. Granger, W.K. Fife, J. Inorg. Organomet. Polym. 3, 141 (1993)CrossRefGoogle Scholar
- 13.C.A. Parish, M. Zeldin, J. Pratt, J. Inorg. Organomet. Polym. 12, 31 (2002)CrossRefGoogle Scholar
- 14.S.M. Kang, S.G. Yoon, S.J. Suh, D.H. Yoon, J. Thin Solid Films 61, 13 (2006)Google Scholar
- 15.S. Uekusa, T. Hama, Mem, Inst. Sci. Tech. Meiji Univ 46, 19 (2007)Google Scholar
- 16.N. Frety, J. Nazon, J. Sarradin, V. Flaud, J.C. Tedenac, J. Alloys Compd. 464, 526 (2008)CrossRefGoogle Scholar
- 17.M. Zeldin, J. Inorg. Organomet. Polym. 11, 63 (2001)CrossRefGoogle Scholar
- 19.Y.J. Lee, B.S. Suh, S.K. Rha, C.O. Park, Thin Solid Film 146, 320141 (1998)Google Scholar
- 19.A.H. Ramezani, M.R. Hantehezadeh, M. Ghoranneviss et al., Bull. Mater. Sci. 39, 633 (2016)CrossRefGoogle Scholar
- 20.G.S. Chen, S.T. Chen, L.C. Yang, P.Y. Lee, J. Vac. Sci. Technol. A18, 720 (2000)CrossRefGoogle Scholar
- 21.R. Gholipur, Z. Khorshidi, A. Bahari, ACS Appl. Mater. Interfaces. 9, 12528 (2017)CrossRefGoogle Scholar
- 22.I.M. Belii, F.F. Komarov, V.S. Tishkovand, V.M. Yankovskii, Phys. Stat. Sol. 45, 343 (1978)CrossRefGoogle Scholar
- 23.W.J. Wang, T.M. Wang, X.J. Wang, Nucl. Instrum. Methods Phys. Res. Sec. B108, 300 (1996)CrossRefGoogle Scholar
- 24.X. Zhou, H.K. Ding, H.D. Li, B.X. Liu, Vacuum 39, 307 (1989)CrossRefGoogle Scholar
- 25.C.L. Au, W.A. Anderson, D.A. Schmitz, J.C. Flassayer, F.M. Collins, J. Mater. Res. 5, 1224 (1990)CrossRefGoogle Scholar
- 26.A.D. Yadav, S.K. Dubey, G.K. Gupta, T.K. Gundu Rao, Radiat. Effects Defect Solids 153, 25 (2000)CrossRefGoogle Scholar
- 27.S. Hoseinzadeh, R. Ghasemiasl, A. Bahari, A.J. Ramezani, Mater. Sci. 28, 14855 (2017)Google Scholar
- 28.S. Hoseinzadeh, R. Ghasemiasl, A. Bahari, A.H. Ramezani, J. Mater. Sci.: Mater. Electron. 28, 14446 (2017)Google Scholar
- 29.M. Nakhaei, A. Bahari., J. Mater. Sci.: Mater. Electron. 27, 5899 (2016)Google Scholar
- 30.D. Dastan, S.L. Panahi, N.B. Chaure., J. Mater. Sci.: Mater. Electron. 27, 12291 (2016)Google Scholar
- 31.D. Dastan, A. Banpurkar., J. Mater. Sci.: Mater. Electron. 28, 3851 (2016)Google Scholar
- 32.R. Ghasemiasl, S. Hoseinzadeh, M.A. Javadi, J. Thermophys. Heat Transf. (2017)Google Scholar
- 33.J.C. Yang, B. Kolasa, J.M. Bibson, M. Yeadon, Appl. Phys. Lett. 73, 2841 (1998)CrossRefGoogle Scholar
- 34.M.H. Tsai, S.C. Sun, H.T. Chiu, S.H. Chuang, Appl. Phys. Lett. 68, 1412 (1996)CrossRefGoogle Scholar
- 35.K.G. Stephen, I.H. Wilson, Thin Solid Films 50, 325 (1978)CrossRefGoogle Scholar