Advertisement

Journal of Cluster Science

, Volume 29, Issue 6, pp 1099–1106 | Cite as

Synthesis of Saucer Shaped Manganese Oxide Nanoparticles by Co-precipitation Method and the Application as Fuel Additive

  • Saba Jamil
  • Shanza Rauf Khan
  • Bushra Sultana
  • Maria Hashmi
  • Muhammad Haroon
  • Muhammad Ramzan Saeed Ashraf Janjua
Original Paper
  • 64 Downloads

Abstract

Saucer shaped manganese oxide nanoparticles are synthesized through co-precipitation method using manganese chloride and manganese acetate as precursors. Synthesized manganese oxide nanoparticles are characterized via techniques like X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The composition, crystallinity and lattice parameters are analyzed from XRD data. The morphology and size of particles are analyzed by SEM and TEM analyses. The efficiency of fuel is evaluated in the presence of additive (manganese oxide nanoparticles). Various physical and combustion parameters are measured in the presence of 2, 4, 6, 8 and 10 ppm dosage of additive. It is observed that the values of these parameters of fuel are significantly changed in the presence of additive.

Graphical Abstract

Keywords

Nanoparticles Saucer Manganese oxide Fuel additive Co-precipitation 

Notes

Acknowledgements

The authors would like to acknowledge the support provided by the University of Agriculture, Faisalabad (UAF) and the University of Sargodha (UOS), Sargodha, Pakistan. This research work was initiated, designed and completed at UAF with collaboration of UOS. However, the final write up was accomplished at King Fahd University of petroleum and Minerals (KFUPM), Dhahran, Kingdom Saudi Arabia. This work was further refined and submitted from Pakistan by the corresponding author during his summer vacations from KFUPM.

References

  1. 1.
    Z. Chen, J. Lai, and C. Shek (2006). Scr. Mater. 55, 735.CrossRefGoogle Scholar
  2. 2.
    S. Jamil, M. R. S. A. Janjua, and S. R. Khan (2017). Aust. J. Chem. 70, 908.CrossRefGoogle Scholar
  3. 3.
    S. Jamil and M. R. S. A. Janjua (2017). J. Clust. Sci. 28, 2369.CrossRefGoogle Scholar
  4. 4.
    M. R. S. A. Janjua, S. Jamil, N. Jahan, S. R. Khan, and S. Mirza (2017). Chem. Cent. J. 11, 49.CrossRefPubMedPubMedCentralGoogle Scholar
  5. 5.
    X. Fan, K. Lai, L. Wang, H. Qiu, J. Yin, P. Zhao, S. Pan, J. Xu, and C. Wang (2015). J. Mater. Chem. A 3, 12179.CrossRefGoogle Scholar
  6. 6.
    M. R. S. A. Janjua, Z. H. Yamani, S. Jamil, A. Mahmood, I. Ahmad, M. Haroon, M. H. Tahir, Z. Yang, and S. Pan (2016). Aust. J. Chem. 69, 467.CrossRefGoogle Scholar
  7. 7.
    M. Mutailipu, M. Zhang, B. Zhang, L. Wang, Z. Yang, X. Zhou, and S. Pan (2018). Angew. Chem. Int. Ed. 57, 6353.CrossRefGoogle Scholar
  8. 8.
    K. E. Woo, J. Wang, K. Wu, K. Lee, J. A. Dolyniuk, S. Pan, and K. Kovnir (2018). Adv. Funct. Mater. 457, 1801589.CrossRefGoogle Scholar
  9. 9.
    M. Dar, Y. Kim, W. Kim, J. Sohn, and H. Shin (2008). Appl. Surf. Sci. 254, 7477.CrossRefGoogle Scholar
  10. 10.
    A. Ashok, A. Kumar, R. R. Bhosale, F. Almomani, M. A. H. S. Saad, S. Suslov, and F. Tarlochan (2018). Int. J. Hydrogen Energy.  https://doi.org/10.1016/j.ijhydene.2018.02.111.CrossRefGoogle Scholar
  11. 11.
    M. Frietsch, F. Zudock, J. Goschnick, and M. Bruns (2000). Sens. Actuators B Chem. 65, 379.CrossRefGoogle Scholar
  12. 12.
    A. Pineda, M. Ojeda, A. A. Romero, A. M. Balu, and R. Luque (2018). Microporous Mesoporous Mater. 272, 129.CrossRefGoogle Scholar
  13. 13.
    A. Becheri, M. Dürr, P. L. Nostro, and P. Baglioni (2008). J. Nanopart. Res. 10, 679.CrossRefGoogle Scholar
  14. 14.
    S. Jamil, M. R. S. A. Janjua, S. R. Khan, and N. Jahan (2017). Mater. Res. Exp. 4, 015902.CrossRefGoogle Scholar
  15. 15.
    L. Chen, L. Li, and G. Li (2008). J. Alloys Compd. 464, 532.CrossRefGoogle Scholar
  16. 16.
    T. Peng, D. Zhao, K. Dai, W. Shi, and K. Hirao (2005). J. Phys. Chem. B 109, 4947.CrossRefPubMedGoogle Scholar
  17. 17.
    H. R. Barai, A. N. Banerjee, N. Hamnabard, and S. W. Joo (2016). RSC Adv. 6, 78887.CrossRefGoogle Scholar
  18. 18.
    N. Dharmaraj, P. Prabu, S. Nagarajan, C. Kim, J. Park, and H. Kim (2006). Mater. Sci. Eng. B 128, 111.CrossRefGoogle Scholar
  19. 19.
    S. Laurent, D. Forge, M. Port, A. Roch, C. Robic, L. Vander Elst, and R. N. Muller (2008). Chem. Rev. 108, 2064.CrossRefPubMedGoogle Scholar
  20. 20.
    S. R. Khan, S. Jamil, M. R. S. A. Janjua, and R. A. Khera (2017). Mater. Res. Exp. 4, 115019.CrossRefGoogle Scholar
  21. 21.
    M. U. Khalid, S. R. Khan, and S. Jamil (2018). J. Inorg. Organomet. Polym. Mater. 28, 168–176.CrossRefGoogle Scholar
  22. 22.
    S. Gholamrezaei and M. Salavati-Niasari (2018). Ultrason. Sonochem. 40, 651.CrossRefPubMedGoogle Scholar
  23. 23.
    M. Cakici, R. R. Kakarla, and F. Alonso-Marroquin (2017). Chem. Eng. J. 309, 151.CrossRefGoogle Scholar
  24. 24.
    J. Akbari and A. Heydari (2012). Curr. Nanosci. 8, 398.CrossRefGoogle Scholar
  25. 25.
    K. A. M. Ahmed, Q. Zeng, K. Wu, and K. Huang (2010). J. Solid State Chem. 183, 744.CrossRefGoogle Scholar
  26. 26.
    H. Yang, Y. Zhuang, H. Hu, X. Du, C. Zhang, X. Shi, H. Wu, and S. Yang (2010). Adv. Funct. Mater. 20, 1733.CrossRefGoogle Scholar
  27. 27.
    T. Ahmad, K. V. Ramanujachary, S. E. Lofland, and A. K. Ganguli (2004). J. Mater. Chem. 14, 3406.CrossRefGoogle Scholar
  28. 28.
    E. Finocchio and G. Busca (2001). Catal. Today 70, 213.CrossRefGoogle Scholar
  29. 29.
    Y. C. Zhang, T. Qiao, and X. Y. Hu (2004). J. Solid State Chem. 177, 4093.CrossRefGoogle Scholar
  30. 30.
    T. Ozkaya, A. Baykal, H. Kavas, Y. Köseoğlu, and M. S. Toprak (2008). Physica B 403, 3760.CrossRefGoogle Scholar
  31. 31.
    J. Park, E. Kang, C. J. Bae, J.-G. Park, H.-J. Noh, J.-Y. Kim, J.-H. Park, H. M. Park, and T. Hyeon (2004). J. Phys. Chem. B 108, 13594.CrossRefGoogle Scholar
  32. 32.
    W. S. Seo, H. H. Jo, K. Lee, B. Kim, S. J. Oh, and J. T. Park (2004). Angew. Chem. Int. Ed. 43, 1115.CrossRefGoogle Scholar
  33. 33.
    F. Jiao, A. Harrison, and P. G. Bruce (2007). Angew. Chem. Int. Ed. 46, 3946.CrossRefGoogle Scholar
  34. 34.
    S. Jamil, H. Ahmad, S. R. Khan, and M. R. S. A. Janjua (2018). J. Clust. Sci. 29, 685.CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • Saba Jamil
    • 1
  • Shanza Rauf Khan
    • 1
  • Bushra Sultana
    • 1
  • Maria Hashmi
    • 1
  • Muhammad Haroon
    • 2
  • Muhammad Ramzan Saeed Ashraf Janjua
    • 2
    • 3
  1. 1.Department of ChemistryUniversity of AgricultureFaisalabadPakistan
  2. 2.Department of ChemistryUniversity of SargodhaSargodhaPakistan
  3. 3.Department of ChemistryKing Fahd University of Petroleum and MineralsDhahranKingdom of Saudi Arabia

Personalised recommendations