Advertisement

Structural, optical, magnetic and electrical properties of perovskite Sr1−xWxTiO3 (x = 0.01 and 0.03) prepared by SSR method ceramics

  • G. Saravanan
  • E. Padmini
  • K. RamachandranEmail author
Article
  • 40 Downloads

Abstract

Tungsten doped with various concentrations (0, 1, and 3%) of strontium titanate ceramic sample was synthesized by a conventional solid state reaction method. The structural phase formation was examined by powder XRD technique and it revealed a single phase cubic perovskite structure of strontium titanate ceramic. The functional group and metal oxide chemical bonding of vibrations were seen to be present in the prepared ceramic samples and it was examined by Fourier transform infrared spectroscopy. The cubic perovskite structure formation and internal disorder parameter of the ceramic compounds were investigated by Raman spectrum. The surface morphology of the prepared ceramic sample was irregular, and its grain size was seen to be reduced, which was investigated by FESEM analysis. It was identified that UV–Visible Diffuse Reflectance Spectra revealed that the absorption for maximum level decreases with the doped ceramic sample. The elemental distribution of the chemical composites of doped ceramic sample was identified by EDX analysis. Dielectric constant was measured to be very low but conductivity level was good as the existence of low concentration defect and space charge polarization were present due to high dielectric constant at lower frequency.

Notes

Acknowledgements

The authors convey their heart felt gratitude to the Nano Technology Research Centre in SRM University. The authors also would like to express their sincere thanks to IIT Madras, Novocontrol technology CIF in Pondicherry University and Loyala College for granting permission to take VSM studies, Raman spectrum, FTIR, UV–Vis and broad band dielectric/impedance spectrometer studies related to instrumentation facility.

References

  1. 1.
    I.K. You, J.-D. Byun, Y.-H. Kim, Solid State Ion. 83, 159–165 (1996)CrossRefGoogle Scholar
  2. 2.
    A.V. Kovalevsky, S. Populoh, S.G. Patrício, P. Thiel, M.C. Ferro, D.P. Fagg, J.R. Frade, A. Weidenkaff, J. Phys. Chem. C 119, 4466–4478 (2015)CrossRefGoogle Scholar
  3. 3.
    S. Devi, A.K. Jha, Asian J. Chem. 21, S117–S124 (2009)Google Scholar
  4. 4.
    H. Kalhori et al., Morphology and structural studies of WO3 films deposited on SrTiO3 by PLD. Appl. Surf. Sci. 390, 43–49 (2016)CrossRefGoogle Scholar
  5. 5.
    Y. Wu et al. Sol. Energy Mater. Sol. Cells. 176, 230–238 (2008)CrossRefGoogle Scholar
  6. 6.
    A. Jia, Z. Su, L.L. Lou, S. Liu, Solid State Sci. 12, 1140–1145 (2010)CrossRefGoogle Scholar
  7. 7.
    C.D. Savaniu, J.T. Irvine, J. Mater. Chem. 19, 8119–8128 (2009)CrossRefGoogle Scholar
  8. 8.
    S.J. Webb et al., J. Am. Ceram. Soc. 85, 1753–1756 (2002)CrossRefGoogle Scholar
  9. 9.
    S.K. Rout, S. Panigrahi, J. Bera, Bull. Mater. Sci. 28, 275–279 (2005)CrossRefGoogle Scholar
  10. 10.
    M. Muralidharan, V. Anbarasu, A. Elaya Perumal, K. Sivakumar, J. Mater. Sci.: Mater. Electron. 26, 6352–6365 (2015)Google Scholar
  11. 11.
    H.M. Nguyen, N.V. Dang, P.Y. Chuang et al., Appl. Phys. Lett. 99, 202501 (2011)CrossRefGoogle Scholar
  12. 12.
    S. Devi, P. Ganguly, S. Jain, A.K. Jha, Ferroelectrics 381, 120–129 (2009)CrossRefGoogle Scholar
  13. 13.
    T. Ahmad., A. K. Ganguli, J. Am. Ceram. Soc. 89, 1326–1332 (2006)CrossRefGoogle Scholar
  14. 14.
    X. Liang, W. Wu, Z. Meng, Mater. Sci. Eng. 99, 366–369 (2003)CrossRefGoogle Scholar
  15. 15.
    C. Dong, J. Appl. Cryst. 32, 838–838 (1999)CrossRefGoogle Scholar
  16. 16.
    I. Coondoo, A.K. Jha, S.K. Agarwal, J. Electroceram. 27, 253–260 (2007)Google Scholar
  17. 17.
    S. Ouni, S. Nouri, J. Rohlicek, R.B. Hassen, Structural and electrical properties of the sol–gel prepared Sr1-xErxSnO3-d compounds. J. Solid State Chem. 192, 132–138 (2012)CrossRefGoogle Scholar
  18. 18.
    M.C.F. Alves, M.R. Nascimento, S.J.G. Lima, P.S. Pizani, J.W.M. Espinosa, E. Longo, L.E.B. Soledade, A.G. Souza, I.M.G. Santos, Mater. Lett. 63, 118–120 (2009)CrossRefGoogle Scholar
  19. 19.
    T. Xian, H. Yang, L. Di, J. Ma, H. Zhang, J. Dai, Nanoscale Res. Lett. 9, 327 (2014)CrossRefGoogle Scholar
  20. 20.
    M.C.F. Alves, S.C. Souza, H.H.S. Lima, M.R. Nascimento, M.R.S. Silva, J.W.M. Espinosa, S.J.G. Lima, E. Longod, P.S. Pizani, L.E.B. Soledadea, A.G. Souzaa, I.M.G. Santosa, J. Alloys Compd. 476, 507–512 (2009)CrossRefGoogle Scholar
  21. 21.
    V.P. Pavlovic, B.D. Stojanovic, V.B. Pavlovic, Z. Marinkovic-Stanojevic, Lj. Živković, M.M. Ristic, Sci. Sint. 40, 235 (2008)CrossRefGoogle Scholar
  22. 22.
    R.L. Brutchey, G. Cheng, Q. Gu, Adv. Mater. 20, 1029 (2008)CrossRefGoogle Scholar
  23. 23.
    K.R. Nandan, A. Ruban Kumar, J. Mater. Sci.: Mater. Electron. 27, 13179–13191 (2016)Google Scholar
  24. 24.
    H. Yu, S. Ouyang, S. Yan, Z. Li, T. Yu, Z. Zou, J. Mater. Chem. 21, 11347–11351 (2011)CrossRefGoogle Scholar
  25. 25.
    M. Raghasudha, D. Ravinder, P. Veerasomaiah, Nanosci. Nanotechnol. 3, 105–114 (2013)Google Scholar
  26. 26.
    J. Nowotny, M. Rekas, Ceram. Int. 20, 265 (1994)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of Physics, Faculty of Engineering and TechnologySRM Institute of Science and TechnologyChennaiIndia

Personalised recommendations