Optimization of substrates and physical properties of CdS thin films for perovskite solar cell applications

Article
First Online:
Received:
Accepted:

Abstract

The physical properties of cadmium sulfide (CdS) thin films have been optimized using different substrates for perovskite solar cell applications as electron-transport layer. The films were deposited by electron beam evaporation on glass, fluorine doped tin oxide (FTO), indium tin oxide and silicon wafer (n-type) and characterized by different respective tools. XRD results show that the films have cubic zinc blende structure with (111) as preferred orientation for all substrates and the calculated crystallographic constants are also discussed. The direct band gap is found 2.41 eV for the films deposited on FTO substrates which is suitable for electron-transport layer in perovskite solar cells due to its good conductivity, crystallinity and an appropriate conduction band level. The electrical studies show that the characteristic behavior is almost linear in both the directions and the conductivity is found to maximum for FTO substrate. The films are also found to be homogeneous, smooth, uniform and free from crystal defects as revealed by SEM studies.

Keywords

Solar Cell Perovskite Solar Cell Conduction Band Level Ambipolar Charge Transport Plane Perovskite Solar Cell 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in to check access.

Notes

Acknowledgements

The authors are pleased to acknowledge the University Grants Commission, New Delhi for financial assistant (F.No. 42-828/2013(SR), F.No. 530/4/DSA-II/2015(SAP-I), F.25-1/2014-15(BSR)/7-123/2007/(BSR)) and to the IUSSTF, New Delhi vide file BASE-2016/I/6 through Bhaskara Advanced Solar Energy Internship to SC.

References

  1. 1.
    V. Senthamilselvi, K. Ravichandran, K. Saravanakumar, Influence of immersion cycles on the stoichiometry of CdS films deposited by SILAR technique. J. Phys. Chem. Solids 74, 65–69 (2013)CrossRefGoogle Scholar
  2. 2.
    Y. Li, Y.L. Song, F.Q. Zhou, P.F. Ji, M.L. Tian, M.L. Wan, H.C. Huang, X.J. Li, Photovoltaic properties of CdS/Si multi-interface nano-heterojunction with incorporation of Cd nanocrystals into the interface. Mater. Lett. 164, 539–542 (2016)CrossRefGoogle Scholar
  3. 3.
    J.P. Enriquez, X. Mathew, Influence of the thickness on structural, optical and electrical properties of chemical bath deposited CdS thin films, Sol. Energy Mater. Sol. Cells 76, 313–322 (2003)CrossRefGoogle Scholar
  4. 4.
    J.A. Akintunde, Effect of deposition parameters and conditions on the physical and electro-optical properties of buffer solution grown CdS thin films. Phys. Stat. Sol. (a) 179, 363–371 (2000)CrossRefGoogle Scholar
  5. 5.
    S.H. Cho, S.S. Kim, M.H. Park, J.H. Suh, J.K. Hong, Surface treatment of the window layer in CdS/CdTe solar cells. J. Korean Phys. Soci. 65, 1590–1593 (2014)CrossRefGoogle Scholar
  6. 6.
    N. Romeo, A. Bosio, V. Canevari, A. Podesta, Recent progress on CdTe/CdS thin film solar cells. Sol. Energy 77, 795–801 (2004)CrossRefGoogle Scholar
  7. 7.
    G. Arreola-Jardon, L.A. Gonzalez, L.A. Garcia-Cerda, B. Gnade, M.A. Quevedo-Lopez, R. Ramirez-Bon, Ammonia-free chemically deposited CdS films as active layers in thin film transistors. Thin Solid Films 519, 517–520 (2010)CrossRefGoogle Scholar
  8. 8.
    S.G. Kumar, K.S.R.K Rao, Physics and chemistry of CdTe/CdS thin film heterojunction photovoltaic devices: fundamental and critical aspects. Energy Environ. Sci. 7, 45–102 (2014)CrossRefGoogle Scholar
  9. 9.
    K. Sentil, D. Mangalaraj, Sa..K. Narayandass, Structural and optical properties of CdS thin films. Appl. Surf. Sci 169–170, 476–479 (2001)CrossRefGoogle Scholar
  10. 10.
    B. O’Regan, M. Gratzel, A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films. Nature 353, 737–740 (1991)CrossRefGoogle Scholar
  11. 11.
    T.K. Todorov, K.B. Reuter, D.B. Mitzi, High-efficiency solar cell with earth-abundant liquid-processed absorber. Adv. Mater. 22, E156–E159 (2010)CrossRefGoogle Scholar
  12. 12.
    S. Panigrahi, D. Basak, Morphology driven ultraviolet photosensitivity in ZnO-CdS composite. J. Colloid Interface Sci 364, 10–17 (2011)CrossRefGoogle Scholar
  13. 13.
    H. Moualkia, G. Rekhila, M. Izerrouken, A. Mahdjoub, M. Trari, Influence of the film thickness on the photovoltaic properties of chemically deposited CdS thin films: application to the photo-degradation of orange II. Mater. Sci. Semicond. Process. 21, 186–193 (2014)CrossRefGoogle Scholar
  14. 14.
    F. Bella, Polymer electrolytes and perovskites: lights and shadows in photovoltaic devices. Electrochim. Acta 175, 151–161 (2015)CrossRefGoogle Scholar
  15. 15.
    H. Liu, Z. Huang, S. Wei, L. Zheng, L. Xiao, Q. Gong, Nano-structured electron transporting materials for perovskite solar cells. Nanoscale 8, 6209–6221 (2016)CrossRefGoogle Scholar
  16. 16.
    Y. Zhao, K. Zhu, Organic-inorganic hybrid lead halide perovskites for optoelectronic and electronic applications. Chem. Soc. Rev 45, 655–689 (2016)CrossRefGoogle Scholar
  17. 17.
    B. Hailegnaw, S. Kirmayer, E. Edri, G. Hodes, D. Cahen, Rain on methylammonium lead iodide based perovskites: possible environmental effects of perovskite solar cells J. Phys. Chem. Lett. 6, 1543–1547 (2015)CrossRefGoogle Scholar
  18. 18.
    Y. Yang, J. Song, Y.L. Zhao, L. Zhu, X.Q. Gu, Y.Q. Gu, M. Che, Y.H. Qiang, Ammonium-iodide-salt additives induced photovoltaic performance enhancement in one-step solution process for perovskite solar cells. J. Alloys Compd. 684, 84–90 (2016)CrossRefGoogle Scholar
  19. 19.
    A. Kojima, K. Teshima, Y. Shirai, T. Miyasaka, Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050–6051 (2009)CrossRefGoogle Scholar
  20. 20.
    A. Hwang, K. Yong, Novel CdS hole-blocking layer for photo-stable perovskite solar cells. ACS Appl. Mater. Interfaces 8, 4226–4232 (2016)CrossRefGoogle Scholar
  21. 21.
    Zuo A., H.J. Bolink, H. Han, J. Huang, D. Cahen, L. Ding, Advances in perovskite solar cells. Adv. Sci. 1500324, 1–16 (2016)Google Scholar
  22. 22.
    G. Xing, N. Mathews, S. Sun, S.S. Lim, Y.M. Lam, M. Gratzel, S. Mhaisalkar, T.C. Sum, Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI3. Science 342, 344–347 (2013)CrossRefGoogle Scholar
  23. 23.
    A.D. Sheikh, A. Bera, M.A. Haque, R.B. Rakhi, S.D. Gobbo, H.N. Alshareef, T. Wu, Atmospheric effects on the photovoltaic performance of hybrid perovskite solar cells. Sol. Energy Mater. Sol. Cells 137, 6–14 (2015)CrossRefGoogle Scholar
  24. 24.
    X. Zhang, Y. Wu, Y. Huang, Z. Zhou, S. Shen, Reduction of oxygen vacancy and enhanced efficiency of perovskite solar cell by doping fluorine into TiO2. J. Alloys Compd. 681, 191–196 (2016)CrossRefGoogle Scholar
  25. 25.
    K. Mahmood, B.S. Swain, A. Amassian, Double-layered ZnO nanostructures for efficient perovskite solar cells. Nanoscale 6, 14674–14678 (2014)CrossRefGoogle Scholar
  26. 26.
    J. Liu, C. Gao, L. Luo, Q. Ye, X. He, L. Quyang, X. Guo, D. Zhung, C. Liao, J. Mei, W. Lau, Low-temperature, solution processed metal sulfide as an electron transport layer for efficient planer perovskite solar cells. J. Mater. Chem. A 3, 11750–11755 (2015)CrossRefGoogle Scholar
  27. 27.
    N.A. Shah, R.R. Sagar, W. Mahmood, W.A.A. Syed, Cu-doping effects on the physical properties of cadmium sulfide thin films. J. Alloys Compd. 512, 185–189 (2012)CrossRefGoogle Scholar
  28. 28.
    S.A. Mahmoud, A.A. Ibrahim, A.S. Riad, Physical properties of thermal coating CdS thin films using a modified evaporation source. Thin Solid Films 372, 144–148 (2000)CrossRefGoogle Scholar
  29. 29.
    T. Tadokoro, Shin-Ichi Ohta, T. Ishiguro, Growth and characterization of CdS epilayers on (100) GaAs by atomic layer epitaxy. J. Cryst. Growth 130, 29–36 (1998)CrossRefGoogle Scholar
  30. 30.
    V. Bilgin, S. Kose, F. Atay, I. Akyuz, The effect of substrate temperature on the structural and some physical properties of ultrasonically sprayed CdS films, Mater. Chem. Phys. 94, 103–108 (2005)CrossRefGoogle Scholar
  31. 31.
    H. Khallaf, I.O. Oladeji, G. Chai, L. Chow, Characterization of CdS thin films grown by chemical bath deposition using four different cadmium sources. Thin Solid Films 516, 7306–7312 (2008)CrossRefGoogle Scholar
  32. 32.
    O. Vigil-Galan, J. Vidal-Larramendi, A. Escamilla-Esquivel, G. Contreras-Puente, F. Cruz-Gandarilla, G. Arriaga-Mejia, M. Chavarria-Castaneda, M. Tufino-Velazquez, Physical properties of CdS thin films grown by pulsed laser ablation on conducting substrates: effect of the thermal treatment. Phys. Stat. Sol. (a) 203, 2018–2023 (2006)CrossRefGoogle Scholar
  33. 33.
    T. Sivaraman, V. Narasimman, V.S. Nagarethinam, A.R. Balu, Effect of chlorine doping on the structural, morphological, optical and electrical properties of spray deposited CdS thin films. Prog. Nat. Sci. 25, 392–398 (2015)CrossRefGoogle Scholar
  34. 34.
    L.L. Yan, X.B. Wang, X.J. Cai, X.J. Li, Effect of pH on the structural, optical and nanomechanical properties of CdS thin films grown by chemical bath deposition. J. Alloys Compd. 632, 450–455 (2015)CrossRefGoogle Scholar
  35. 35.
    B. Liu, R. Luo, B. Li, J. Zhang, W. Li, L. Wu, L. Feng, J. Wu, Effects of deposition temperature and CdCl2 annealing on the CdS thin films prepared by pulsed laser deposition. J. Alloys Compd. 654, 333–339 (2016)CrossRefGoogle Scholar
  36. 36.
    M.J. Kim, B.K. Min, C.D. Kim, S.H. Lee, H.T. Kim, S.K. Jung, S.H. Sohn, Study of the physical property of the cadmium sulfide thin film depending on the process condition, Curr. Appl. Phys. 10, S455–S458 (2010)Google Scholar
  37. 37.
    E. Yucel, O. Sahin, Effect of pH on the structural, optical and nanomechanical properties of CdS thin films grown by chemical bath deposition. Ceram. Int. 42, 6399–6407 (2016)CrossRefGoogle Scholar
  38. 38.
    S. Chander, M.S. Dhaka, Impact of thermal annealing on physical properties of vacuum evaporated polycrystalline CdTe thin films for solar cell applications. Physica E 80, 62–68 (2016)CrossRefGoogle Scholar
  39. 39.
    S. Chander, M.S. Dhaka, Preparation and physical characterization of CdTe thin films deposited by vacuum evaporation for photovoltaic applications, Adv. Mater. Lett. 6, 907–912 (2015)CrossRefGoogle Scholar
  40. 40.
    Y.S. Lo, R.K. Choubey, W.C. Yu, W.T. Hsu, C.W. Lan, Shallow bath chemical deposition of CdS thin film. Thin Solid Films 520, 217–223 (2011)CrossRefGoogle Scholar
  41. 41.
    S. Chander, M. S. Dhaka, Influence of thickness on physical properties of vacuum evaporated polycrystalline CdTe thin films for solar cell applications. Physica E 76, 52–59 (2016)CrossRefGoogle Scholar
  42. 42.
    A.P. Samantilleke, M.F. Cerqueira, S. Heavens, P. Warren, I.M. Dharmadasa, G.E.A. Muftah, C.J.R. Silva, B. Mari, Characterisation of chemical bath deposited CdS thin films on different substrates using electrolyte contacts. Thin Solid Films 519, 7583–7586 (2011)CrossRefGoogle Scholar
  43. 43.
    A.S. Hassanien, A.A. Akl, Influence of composition on optical and dispersion parameters of thermally evaporated non-crystalline Cd50S50_xSex thin films. J. Alloys Compd. 648, 280–290 (2015)CrossRefGoogle Scholar
  44. 44.
    C.P. Nikam, S.R. Gosavi, Characterization of nanocrystalline CdS thin films deposited on FTO by CBD for photosensor applications, Adv. Appl. Sci. Res. 5, 267–272 (2014)Google Scholar
  45. 45.
    A.S. Hassanien, K.A. Aly, A.A. Akl, Optical properties of thermally evaporated ZnSe thin films annealed at different pulsed leaser powers. J. Alloys Compd. 685, 733–742 (2016)CrossRefGoogle Scholar
  46. 46.
    P.J.L. Herve, L.K.J. Vandamme, Empirical temperature dependence of the refractive index of semiconductors. J. Appl. Phys 77, 5476–5477 (1995)CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media New York 2017

Authors and Affiliations

  1. 1.Department of PhysicsMohanlal Sukhadia UniversityUdaipurIndia
  2. 2.Microelectronics Research CenterIowa State University of Science and TechnologyAmesUSA

Personalised recommendations