Deformation behavior of tin and some tin alloys

Article

Abstract

Plastic deformation, creep and deformation twinning of β-tin and some tin alloys related to Pb-free solder applications are reviewed. The results are summarized and evaluated among conflicting findings and conclusions. The studies are helpful for the search of the best Pb-free solder with reliability and long service life. The areas which need more information are pointed out.

References

  1. 1.
    L.C. Tyte, Proc. Roy. Soc. 50, 193 (1938)Google Scholar
  2. 2.
    K. Löhberg, H. Moustafa, Zeitschrift für Metallkunde 67(5), 333 (1976)Google Scholar
  3. 3.
    S.N.G. Chu, J.C.M. Li, Mater. Sci. Eng. 39, 1 (1979)Google Scholar
  4. 4.
    B. Akdim, D.A. Papaconstantopoulos, M.J. Mehl, Phil. Mag. B 82, 47 (2002)Google Scholar
  5. 5.
    K.N. Subramanian, J.G. Lee, Mat. Sci. Eng. A421, 46 (2006)Google Scholar
  6. 6.
    C.S. Barrett in Metallurgy and Metallurgical Engineering Series, ed. by R. F. Mehl, 2nd edn. (McGraw-Hill, New York, 1952), pp. 337–379 (see also Metals Handbook, American Society for Metals, Metals Park, OH, 1948, p. 1071)Google Scholar
  7. 7.
    E. Schmid, W. Boas, Plasticity (Chapman-Hall, London, 1968)Google Scholar
  8. 8.
    M. Lorenz, Zeitschrift für Metallkunde 59, 419 (1968)Google Scholar
  9. 9.
    H. Mark, M. Polanyi, Z. Physik 18, 75 (1923)Google Scholar
  10. 10.
    J. Obinata, E. Schmid, Z. Physik 82, 224 (1933)Google Scholar
  11. 11.
    J. Weertman, J.E. Breen, J. Appl. Phys. 27, 1189 (1956)Google Scholar
  12. 12.
    G.I. Kirichenko, V.P. Soldatov, Fizika Metallov I Metallovedenie 54(3) 560 (1982) Translation, Phys. Met. Metall. 54, 130 (1982)Google Scholar
  13. 13.
    K. Ojima, T. Hirokawa, Jpn. J. Appl. Phys., Part 1 (Regular Papers & Short Notes), 22, 46 (1983)Google Scholar
  14. 14.
    M. Nagasaka, Jpn. J. Appl. Phys., Part 1 (Regular Papers & Short Notes), 28, 446 (1989)Google Scholar
  15. 15.
    R. Fiedler, A.R. Lang, J. Mat. Sci. 7, 531 (1972)Google Scholar
  16. 16.
    R. Fiedler, I. Vagera, Phys. Status Solidi A32, 419 (1975)Google Scholar
  17. 17.
    A.N. Stroh, Phil. Mag. 3, 625 (1958)CrossRefGoogle Scholar
  18. 18.
    B. Duzgun, I. Aytas, Jpn. J. Appl. Phys. Part 1-Regular Papers Short Notes & Review Papers 32, 3214 (1993)Google Scholar
  19. 19.
    K. Honda, Jpn. J. Appl. Phys. 17, 33 (1978)Google Scholar
  20. 20.
    K. Honda, Jpn. J. Appl. Phys. 18, 215 (1979)Google Scholar
  21. 21.
    K. Honda, Jpn. J. Appl. Phys. 26, 637 (1987)Google Scholar
  22. 22.
    L. Rotherham, A.D.N. Smith, G.B. Greenough, J. Inst. Metals 79, 439 (1951)Google Scholar
  23. 23.
    E. Fraizier, M.H. Nadal, R. Oltra, Jpn. J. Appl. Phys. 93, 649 (2003)Google Scholar
  24. 24.
    I. Takamichi, I.L. Roderick, The Physical Properties of Liquid Metals, vol. 1 (Clarendon, Oxford, 1988), p. 71, Chapter 3Google Scholar
  25. 25.
    V.M. Mathew, C.S. Menon, K.P. Jayachandran, J. Phys. Chem. Solids 63, 1835 (2002)Google Scholar
  26. 26.
    W.P. Mason, H.E. Bommel, J. Acoust. Soc. Am. 28, 930 (1956)Google Scholar
  27. 27.
    P.W. Bridgeman, Proc. Natl Acad. Sci. USA 10, 411 (1924)Google Scholar
  28. 28.
    K.D. Swartz, W.B. Chua, C. Elbaum, Phys. Rev. B 6, 426 (1972)Google Scholar
  29. 29.
    R.R. Rao, A. Padmaja, J. Appl. Phys. 62, 15 (1987)Google Scholar
  30. 30.
    P.J. Fensham, Aust. J. Sci. Res. 3A, 91 (1950)Google Scholar
  31. 31.
    J.D. Meakin, E. Klokholm, Trans. Met. Soc. AIME 218, 463 (1960)Google Scholar
  32. 32.
    W. Chomka, J. Andruszkiewicz, Nucleonica 5 611 (1960) Translation, pp. 521–524Google Scholar
  33. 33.
    C. Coston, N.H. Nachtrieb, J. Phys. Chem. 8, 2219 (1964)Google Scholar
  34. 34.
    G. Pawlicki, Nukleonica 12, 1123 (1967), Translation pp. 45–56Google Scholar
  35. 35.
    J.C.M. Li, in Rate Processes in Plastic Deformation of Materials, ed. by J.C.M. Li, A.K. Mukherjee (American Soc. Metals, Metals Park, OH, 1975), p. 475Google Scholar
  36. 36.
    K.L. Devries, G.S. Baker, P. Gibbs, J. Appl. Phys. 34, 2258 (1963)Google Scholar
  37. 37.
    V.D. Natsik, V.P. Soldatov, L.G. Ivanchenko, G.I. Kirichenko, Low Temp. Phys. 30(3), 253 (2004)Google Scholar
  38. 38.
    V.P. Soldatov, V.D. Natsik, G.I. Kirichenko, Low Temp. Phys. 27, 1048 (2001)Google Scholar
  39. 39.
    V.D. Natsik, V.P. Soldatov, G.I. Kirichenko, L.G. Ivanchenko, Low Temp. Phys. 29, 340 (2003)Google Scholar
  40. 40.
    G.I. Kirichenko, V.D. Natsik, V.P. Soldatov, Fizika Nizkikh Temperatur 18(11), 1270 (Nov. 1992) Transloation: Sov. J. Low Temp. Phys. 18, 887 (1992)Google Scholar
  41. 41.
    A.N. Diulin, G.I. Kirichenko, V.D. Natsik et al., Low Temp. Phys. 24, 452 (1998)Google Scholar
  42. 42.
    M. Fujiwara, T. Hirokawa, Jpn. J. Appl. Phys., Part 1 (Regular Papers & Short Notes), 25, 1598 (1986)Google Scholar
  43. 43.
    M. Fujiwara, Mater. Sci. Eng. A - Struct. Mater. Prop. Microstruct. Proce. 234, 991 (1997)Google Scholar
  44. 44.
    M. Nagasaka, Jpn. J. Appl. Phys. Part 1-Regular Papers Short Notes & Review Papers 38(1A), 171 (1999)Google Scholar
  45. 45.
    A.E. Ekinci, N. Ucar, G. Cankaya, B. Duzgun, Indian J. Eng. Mater. Sci. 10(5), 416 (2003)Google Scholar
  46. 46.
    J.E. Breen, J. Weertman, Trans. Am. Instit. Min. Metall. Eng. 203(11), 1230 (1955)Google Scholar
  47. 47.
    J. Weertman, J. Appl. Phys. 28(2), 196 (1957)Google Scholar
  48. 48.
    R.E. Frenkel, O.D. Sherby, J.E. Dorn, Acta Metall. 3, 470 (1955)Google Scholar
  49. 49.
    K.E. Puttick, R. King, J. Inst. Metals 80, 537 (1952)Google Scholar
  50. 50.
    C.D. Wiseman, O.D. Sherby, J.E. Dorn, Trans. AIME, J. Metals 9, 57 (1957)Google Scholar
  51. 51.
    L.G. Bonar, G.B. Craig, Can. J. Phys. 36, 1445 (1958)Google Scholar
  52. 52.
    O.D. Sherby, J.E. Dorn, Trans. AIME 194, 959 (1952)Google Scholar
  53. 53.
    S.H. Suh, J.B. Cohen, J. Weertman, Scripta Metall. 15, 517 (1981)Google Scholar
  54. 54.
    S.H. Suh, J.B. Cohen, J. Weertman, Metall. Trans. A-Phys. Metall. Mater. Sci. 14, 117 (1983)Google Scholar
  55. 55.
    P. Adeva, G. Caruana, O.A. Ruano et al., Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Proce. 194, 17 (1995)Google Scholar
  56. 56.
    R.J. McCabe, M.E. Fine, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 33, 1531 (2002)Google Scholar
  57. 57.
    M.D. Mathew, H.H. Yang, S. Movva, K.L. Murty, Metall. Mater. Trans. A-Phys. Metall. Mater. Sci. 36A, 99 (2005)Google Scholar
  58. 58.
    F. Garofalo, Fundamentals of Creep and Creep-Rapture in Metals (Macmillan, NY 1966), p. 101Google Scholar
  59. 59.
    C. Park, X. Long, S. Hoberman, S. Ma, I. Dutta, J. Mat. Sci. to appear (2006)Google Scholar
  60. 60.
    X. Long, D. Pan, I. Dutta, unpublishedGoogle Scholar
  61. 61.
    E.C. Yu, J.C.M. Li, Phil. Mag. 36, 811 (1977)Google Scholar
  62. 62.
    H.Y. Yu, J.C.M. Li, J. Mat. Sci. 12, 2214 (1977)Google Scholar
  63. 63.
    J.C.M. Li, Mat. Sci. Eng. A322, 23 (2002)Google Scholar
  64. 64.
    M.J. Mayo, W.D. Nix, Acta Metall. 36, 2183 (1988)Google Scholar
  65. 65.
    V. Raman, R. Berriche, J. Mater. Res. 7, 627 (1992)Google Scholar
  66. 66.
    M. Fujiwara, M. Otsuka, Mater. Sci. Eng. A - Struct. Mater. Prop. Microstruct. Proce. 319, 929 (2001)Google Scholar
  67. 67.
    M. Fujiwara, M. Otsuka, J. Jpn. Instit. Metals 63, 760 (1999)Google Scholar
  68. 68.
    T.S. Kê, Phys. Rev. 71, 533 (1947)Google Scholar
  69. 69.
    T.S. Kê, Phys. Rev. 72, 41 (1947)Google Scholar
  70. 70.
    T.S. Kê, Phys. Rev. 73, 267 (1948)Google Scholar
  71. 71.
    T.S. Kê, J. Appl. Phys. 20, 274 (1949)Google Scholar
  72. 72.
    F.A. Mohamed, K.L. Murty, J.W. Morris, Metall. Trans. 4, 935 (1973)Google Scholar
  73. 73.
    W.A. Zama, D.D. Lang, F.R. Brotzen, J. Mech. Phys. Solids 8, 45 (1960)Google Scholar
  74. 74.
    Japanese Ministry of Health and Welfare Waste Regulation (1998)Google Scholar
  75. 75.
    European Union WEEE Directive, 3rd draft ed. (2000)Google Scholar
  76. 76.
    W.J. Plumbridge, C.R.C.R. Gagg, J. Mat. Sci. Mat. Electr. 10, 461 (1999)Google Scholar
  77. 77.
    M. Amagai, M. Watanabe, M. Omiya, K. Kishimoto, T. Shibuya, Microelectr. Reliab. 42, 951 (2002)Google Scholar
  78. 78.
    M.L. Huang, L. Wang, C.M.L. Wu, J. Mat. Res. 17, 2897 (2002)Google Scholar
  79. 79.
    J. Cadek, Creep in Metallic Materials (Amsterdam, Elsevier, The Netherlands, 1988), p. 44Google Scholar
  80. 80.
    J. Yu, D.K. Joo, S.W. Shin, Acta Met. 50, 4315 (2002)Google Scholar
  81. 81.
    K.S. Kim, S.H. Huh, K. Suganuma, Mat. Sci. Eng. A333, 106 (2002)Google Scholar
  82. 82.
    P.T. Vianco, J.A. Rejent, A.C. Kilgo, J. Electr. Mat. 33, 1389 (2004)Google Scholar
  83. 83.
    P.T. Vianco, J.A. Rejent, A.C. Kilgo, J. Electr. Mat. 33, 1473 (2004)Google Scholar
  84. 84.
    P.T. Vianco, J.A. Rejent, A.C. Kilgo, J. Electr. Mat. 32, 142 (2003)Google Scholar
  85. 85.
    P.T. Vianco, J.A. Rejent, J.J. Martin, J. Metals 55, 50 (2003)Google Scholar
  86. 86.
    S. Wiese, K.J. Wolter, Microelectr. Reliab. 44, 1923 (2004)Google Scholar
  87. 87.
    M.M. El-Bahay et al., J. Mat. Sci. Electr. Mat. 15, 519 (2004)Google Scholar
  88. 88.
    I. Shohji, T. Yoshida, T. Takahashi, S. Hioki, Mat. Sci. Eng. A 366, 50 (2004)Google Scholar
  89. 89.
    F.Q. Lang, H. Tanaka, O. Munegata, T. Taguchi, T. Narita, Mater. Charact. 54, 223 (2005)Google Scholar
  90. 90.
    C.H. Lin, D.Y. Chu, J. Mat. Sci. Electr. Mat. 16, 355 (2005)Google Scholar
  91. 91.
    F. Guo, J.P Lucas, K.N. Subramanian, J. Mat. Sci. Mat. Electr. 12, 27 (2001)Google Scholar
  92. 92.
    F. Guo, J. Lee, J.P. Lucas, K.N. Subramanian, T.R. Bieler, J. Electr. Mat. 30, 1222 (2001)Google Scholar
  93. 93.
    S.G. Jadhav, T.R. Bieler, K.N. Subramanian, J.P. Lucas, J. Electr. Mat. 30, 1197 (2001)Google Scholar
  94. 94.
    H. Rhee, K.N. Subramanian, J. Electr. Mat. 32, 1310 (2003)Google Scholar
  95. 95.
    H. Rhee, K.N. Subramanian, A. Lee, J.G. Lee, Solder. Surface Mount Technol. 15, 21 (2003)Google Scholar
  96. 96.
    S. Wiese, F. Feustel, E. Meusel, Sens. Actuators A99, 188 (2002)Google Scholar
  97. 97.
    F. Guo, S. Choi, K.N. Subramanian, T.R. Bieler, J.P. Lucas, A. Achari, M. Paruchuri, Mat. Sci. Eng. A351, 190 (2003)Google Scholar
  98. 98.
    M. Kerr, N. Chawla, Acta Mater. 52, 4527 (2004)Google Scholar
  99. 99.
    J.P. Lucas, H. Rhee, F. Guo, K.N. Subramanian, J. Electr. Mat. 32, 1375–1383 (2003)Google Scholar
  100. 100.
    I. Dutta, C. Park, S. Choi, Mat. Sci. Eng. A 379, 401 (2004)Google Scholar
  101. 101.
    F.Q. Yang, L.L. Peng, Mat. Sci. Eng. A 409, 87 (2005)Google Scholar
  102. 102.
    I. Dutta, D. Pan, R.A. Marks, S.G. Jadhav, Mat. Sci. Eng. A 410–411, 48 (2005)Google Scholar
  103. 103.
    F.Q. Yang, J.C.M. Li, Mat. Sci. Eng. A 201, 40 (1995)Google Scholar
  104. 104.
    D. Pan, R.A. Marks, I. Dutta, R. Mahajan, S.G. Jadhav, Rev. Sci. Instrum. 75, 5244 (2004)Google Scholar
  105. 105.
    H.J. Frost, M.F. Ashby, Deformation Mechanism Maps—The Plasticity and Creep of Metals and Ceramics (Pergaman, Oxford, 1982), p. 21Google Scholar
  106. 106.
    R.K. Mahidhara, S.M.L. Sastry, I. Turlik, K.L. Murty, Scripta Met. Mat. 31, 1145 (1994)Google Scholar
  107. 107.
    F.A. Sadykov, N.P. Barykin, I.S. Valeev, V.N. Danilenko, J. Mater. Eng. Perform. 12(1), 29 (2003)Google Scholar
  108. 108.
    K. Yomogita, Jpn. J. Appl. Phys. 9, 1437 (1970)Google Scholar
  109. 109.
    A.Z. Mohamed, M.S. Saker, A.M.A. Daiem et al., Phys. Status Solidi A-Appl. Res. 133, 51 (1992)Google Scholar
  110. 110.
    R. Clark, G.B. Craig, B. Chalmers, Acta Crystallogr. 3(6), 479 (1950)Google Scholar
  111. 111.
    E. Schmid, W. Boas, Kristallplastizitat (Springer, Berlin, 1935)Google Scholar
  112. 112.
    C.S. Barrett, Structure of Metals (McGraw-Hill, New York, 1943)Google Scholar
  113. 113.
    C.E. Elam, Distortion of Metal Crystals (Clarendon Press, Oxford, 1935)Google Scholar
  114. 114.
    B. Chalmers, Proc. Phys. Soc. 47, 733 (1935)Google Scholar
  115. 115.
    J.K. Lee, M.H. Yoo, Metall. Trans. A (Phys. Metall. Mater. Sci.) 21A, 2521–2530 (1990)Google Scholar
  116. 116.
    K. Ishii, H. Kiho, J. Phys. Soc. Jpn. 18, 1122 (1963)Google Scholar
  117. 117.
    J.D. Eshelby, Prog. Solid Mech. 2, 89 (1961)Google Scholar
  118. 118.
    T. Mura, Micromechanics of Defects in Solids, 2nd edn. (Martinus Nijhoff, Dordrecht, The Netherlands, 1987), Chapter 4Google Scholar
  119. 119.
    R. Clark, G.B. Craig, Progr. Metal Phys. 3, 135 (1952)Google Scholar
  120. 120.
    E. Votava, H. Hatwell, Acta Met. 8, 874 (1960)Google Scholar
  121. 121.
    J.T. Fourie, F. Weinberg, F.W.C. Boswell, Acta Metall. 8, 851 (1960)Google Scholar
  122. 122.
    K. Ishii, J. Phys. IV 6(C8), 269–272 (1996)Google Scholar
  123. 123.
    J.H. Brunton, M.P.W. Wilson, Proce. Roy. Soc. Lond. Ser. A-Mathemat. Phys. Sci. A 309(#1498), 345 (1969)Google Scholar
  124. 124.
    W.P. Mason, H.J. Mcskimin, W. Shockley, Phys. Rev. 73, 1213 (1948)Google Scholar
  125. 125.
    K. Ishii, H. Kiho, J. Phys. Soc. Jpn. 18, 1133 (1963)Google Scholar
  126. 126.
    K. Ishii, J. Phys. Soc. Jpn. 14, 1315 (1959)Google Scholar
  127. 127.
    S. Maruyama, J. Phys. Soc. Jpn. 15, 1243 (1960)Google Scholar
  128. 128.
    M.G. Jon, D.N. Beshers, W.P. Mason, J. Appl. Phys. 45(9), 3716 (1974)Google Scholar
  129. 129.
    D.R. Overcash, E.P. Stillwel, M.J. Skove, J.H. Davis, Philos. Mag. 25, 1481 (1972)Google Scholar
  130. 130.
    K.N. Tu, D. Turnbull. J. Metals 21, A18 (1969)Google Scholar
  131. 131.
    K.N. Tu, D. Turnbull, Acta Metall. 17(10), 1263 (1969)Google Scholar
  132. 132.
    B.D. Rothberg, Philos. Mag. 25, 1473 (1972)Google Scholar
  133. 133.
    J.H. Davis, M.J. Skove, E.P. Stillwell, Solid State Comm. 4, 597 (1966)Google Scholar

Copyright information

© Springer Science+Business Media, LLC 2006

Authors and Affiliations

  1. 1.Department of Chemical and Materials EngineeringUniversity of KentuckyLexingtonUSA
  2. 2.Department of Mechanical EngineeringUniversity of RochesterRochesterUSA

Personalised recommendations