Advertisement

Structure and tensile properties of carbon fibers based on electron-beam irradiated polyacrylonitrile fibers

  • Yuchen Liu
  • Xiangyu Huang
  • Jie Liu
  • Jieying Liang
  • Xiaoxu WangEmail author
Chemical routes to materials
  • 61 Downloads

Abstract

Electron-beam irradiation has demonstrated the promising results for tuning the exothermic behavior of polyacrylonitrile (PAN) fibers, and the stabilization time can be shortened accordingly. However, the mechanical properties, especially the tensile strength, of carbon fibers based on irradiated PAN fibers are usually lower than those of standard carbon fibers. In this study, PAN fibers irradiated with an electron beam to 1200 kGy are continuously stabilized and carbonized to produce carbon fibers (i-CFs). The mechanical properties of the i-CFs are optimized by controlling the density of the stabilized fibers, and the best performing i-CF achieves a tensile strength of 2.27 GPa and a modulus of 174 GPa. The structure and properties of the carbon fibers and the precursor fibers are investigated to determine the origin of the low tensile properties of the i-CFs. The results show that the graphite crystalline structures are comparable between the CFs and the i-CFs. However, two distinct peaks at 2020 and 1668 cm−1 emerge in the FT-IR spectra of PAN fibers after irradiation that correspond to the C=C=N (ketenimine) and C=N–N=C conjugation groups. These cross-linking structures may disrupt the cyclization reaction and hinder the formation of the aromatic structure of PAN during stabilization, which bring about defects in the resultant carbon fibers.

Notes

Acknowledgements

This research was supported by the National Natural Science Foundation of China (Grant #: 51602016) and the Fundamental Research Funds for the Central Universities (Grant #: PYVZ1704 and ZY1607).

Compliance with ethical standards

Conflict of interest

The authors declare no conflicts of interest.

Supplementary material

10853_2019_4182_MOESM1_ESM.pdf (2.8 mb)
Supplementary material 1 (PDF 2854 kb)

References

  1. 1.
    Frank E, Steudle LM, Ingildeev D, Spörl JM, Buchmeiser MR (2014) Carbon fibers: precursor systems, processing, structure, and properties. Angew Chemie Int Ed 53:5262–5298CrossRefGoogle Scholar
  2. 2.
    Zhang Y, Heo YJ, Son YR, In I, An KH, Kim BJ, Park SJ (2019) Recent advanced thermal interfacial materials: a review of conducting mechanisms and parameters of carbon materials. Carbon 142:445–460CrossRefGoogle Scholar
  3. 3.
    Wangxi Z, Jie L, Gang W (2003) Evolution of structure and properties of PAN precursors during their conversion to carbon fibers. Carbon 41:2805–2812CrossRefGoogle Scholar
  4. 4.
    Warner SB, Peebles LH, Uhlmann DR (1979) Oxidative stabilization of acrylic fibres. Part 1 Oxygen uptake and general mode. J Mater Sci 14:556–564.  https://doi.org/10.1007/BF00772714 CrossRefGoogle Scholar
  5. 5.
    Zhao W, Lu Y, Zhou L, Jiang J, Wang J, Chen Q, Tian F (2016) Effects on the oriented structure and mechanical properties of carbon fibers by pre-irradiating polyacrylonitrile fibers with γ ray. J Mater Sci 51:7073–7084.  https://doi.org/10.1007/s10853-016-9875-x CrossRefGoogle Scholar
  6. 6.
    Shin HK, Park M, Kim HY, Park SJ (2015) An overview of new oxidation methods for polyacrylonitrile-based carbon fibers. Carbon Lett 16:11–18CrossRefGoogle Scholar
  7. 7.
    Yang J, Liu Y, Liu J, Shen Z, Liang J, Wang X (2018) Rapid and continuous preparation of polyacrylonitrile-based carbon fibers with electron-beam irradiation pretreatment. Materials 11:1270CrossRefGoogle Scholar
  8. 8.
    Yuan H, Wang Y, Liu P, Yu H, Ge B, Mei Y (2011) Effect of electron beam irradiation on polyacrylonitrile precursor fibers and stabilization process. J Appl Polym Sci 122:90–96CrossRefGoogle Scholar
  9. 9.
    Sui X, Xu Z, Hu C, Chen L, Liu L, Kuang L, Ma M, Zhao L, Li J, Deng H (2016) Microstructure evolution in γ-irradiated carbon fibers revealed by a hierarchical model and Raman spectra from fiber section. Compos Sci Technol 130:46–52CrossRefGoogle Scholar
  10. 10.
    Shan M, Wang H, Xu Z, Li N, Chen C, Shi J, Liu L, Kuang L, Ma M, Zhang C (2018) Synergetic improvement of mechanical properties and surface activities in γ-irradiated carbon fibers revealed by radial positioning spectroscopy and mechanical model. Analyt Methods 10:496–503CrossRefGoogle Scholar
  11. 11.
    Xu Z, Chen L, Li J, Wang R, Qian X, Song X, Liu L, Chen G (2011) Oxidation and disorder in few-layered graphene induced by the electron-beam irradiation. Appl Phys Lett 98:183112CrossRefGoogle Scholar
  12. 12.
    Ozur GE, Proskurovsky DI, Rotshtein VP, Markov AB (2003) Production and application of low-energy high-current electron beams. Laser Part Beams 21:157–174CrossRefGoogle Scholar
  13. 13.
    Park S, Yoo SH, Kang HR, Jo SM, Joh HI, Lee S (2016) Comprehensive stabilization mechanism of electron-beam irradiated polyacrylonitrile fibers to shorten the conventional thermal treatment. Sci Rep 6:27330CrossRefGoogle Scholar
  14. 14.
    Lian F, Liu J, Ma Z, Liang J (2012) Stretching-induced deformation of polyacrylonitrile chains both in quasicrystals and in amorphous regions during the in situ thermal modification of fibers prior to oxidative stabilization. Carbon 50:488–499CrossRefGoogle Scholar
  15. 15.
    Park S, Kil HS, Choi D, Song SK, Lee S (2019) Rapid stabilization of polyacrylonitrile fibers achieved by plasma-assisted thermal treatment on electron-beam irradiated fibers. J Ind Eng Chem 69:449–454CrossRefGoogle Scholar
  16. 16.
    Takaku A, Hashimoto T, Miyoshi T (1985) Tensile properties of carbon fibers from acrylic fibers stabilized under isothermal conditions. J Appl Polym Sci 30:1565–1571CrossRefGoogle Scholar
  17. 17.
    Arbab S, Zeinolebadi A (2013) A procedure for precise determination of thermal stabilization reactions in carbon fiber precursors. Polym Degrad Stab 98:2537–2545CrossRefGoogle Scholar
  18. 18.
    Gohs U, Böhm R, Brünig H, Fischer D, Häussler L, Kirsten M, Malanin M, Müller MT, Cherif C, Wolz DSJ, Jäger H (2019) Electron beam treatment of polyacrylonitrile copolymer above the glass transition temperature in air and nitrogen atmosphere. Radiat Phys Chem 156:22–30CrossRefGoogle Scholar
  19. 19.
    Miao P, Wu D, Zeng K, Xu G, Zhao C, Yang G (2010) Influence of electron beam pre-irradiation on the thermal behaviors of polyacrylonitrile. Polym Degrad Stab 95:1665–1671CrossRefGoogle Scholar
  20. 20.
    Zhang W, Wang M, Liu W, Yang C, Wu G (2019) Higher dose rate effect of 500-keV EB irradiation favoring free radical annealing and pre-oxidation of polyacrylonitrile fibers. Polym Degrad Stab 167:201–209CrossRefGoogle Scholar
  21. 21.
    August J, Klemm K, Kroto HW, Walton DRM (1989) FTIR study of ynamines and ketenimines produced by thermolysis of substituted isoxazolones. J Chem Soc Perkin Trans 2:1841–1844CrossRefGoogle Scholar
  22. 22.
    Wolf R, Wong MW, Kennard CHL, Wentrup C (1995) A remarkably stable linear ketenimine. J Am Chem Soc 117:6789–6790CrossRefGoogle Scholar
  23. 23.
    Krow GR (1971) Synthesis and reactions of ketenimines. Angew Chemie Int Ed 10:435–449CrossRefGoogle Scholar
  24. 24.
    Lu P, Wang Y (2012) The thriving chemistry of ketenimines. Chem Soc Rev 41:5687–5705CrossRefGoogle Scholar
  25. 25.
    Neuman RC, Sylwester AP (1983) Evidence for a radical decomposition mechanism for diphenyl-N-benzylketene imine. J Org Chem 48:2285–2287CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2020

Authors and Affiliations

  1. 1.Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of EducationBeijing University of Chemical TechnologyChao-Yang District, BeijingChina
  2. 2.SINOPEC Shanghai Petrochemical Company LimitedShanghaiChina

Personalised recommendations