Advertisement

Journal of Materials Science

, Volume 54, Issue 14, pp 10235–10248 | Cite as

Effect of rare earth surface modification of carbon nanotubes on enhancement of interfacial bonding of carbon nanotubes reinforced epoxy matrix composites

  • M. R. Jiang
  • Hua Zhou
  • X. H. ChengEmail author
Composites

Abstract

Rare earth (RE) lanthanum chloride was used to modify carbon nanotubes (CNTs) to obtain rare earth modified carbon nanotubes (RECNTs). The modified CNTs were characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. The results show that RE has a significant effect on improving the surface activity of carbon nanotubes. Through the chemical function of RE, the CNTs were successfully grafted with functional groups such as amino groups and carboxyl groups. This method can be used to connect any oxygen- or nitrogen-containing functional groups to the CNTs according to actual needs. Then, the modified CNTs were incorporated into epoxy resin (EP) to prepare composite (REACNTs/EP). The mechanical properties of the composites were tested by Zwick/Roell Z100 and Zwick/Roell Z20 test machine, and the tensile fractural sections were analyzed by scanning electron microscopy, and compared to the composites prepared with untreated CNTs (CNTs/EP), acidified carbon nanotubes (ACNTs/EP), acidification and RE synergistic modification of carbon nanotubes (REACNTs/EP). The results show that the ultimate tensile strength and tensile modulus of RECNTs/EP were increased by 33.9%, 73.7%, respectively, compared with pure EP, while the properties of REACNTs/EP were increased by 50.7%, 90.9%, indicating that RE has excellent effect on improving the mechanical properties of carbon nanotube-reinforced composites.

Notes

Acknowledgements

This project was supported by The Tribology Science Fund of State Key Laboratory of Tribology (No. SKLTKF17A02) and the analytical testing was provided by Instrumental Analysis Center of Shanghai Jiao Tong University (iac.sjtu.edu.cn) and Shiyanjia test center (www.shiyanjia.com).

References

  1. 1.
    Xie S, Li W, Pan Z, Chang B, Sun L (2000) Mechanical and physical properties on carbon nanotube. J Phys Chem Solids 61(7):1153–1158CrossRefGoogle Scholar
  2. 2.
    Oberlin A, Endo M, Koyama T (1976) High resolution electron microscope observations of graphitized carbon fibers. Carbon 14(2):133–135CrossRefGoogle Scholar
  3. 3.
    Iijima S (1991) Helical microtubules of graphitic carbon. Nature 354(6348):56–58CrossRefGoogle Scholar
  4. 4.
    Volder MFLD, Tawfick SH, Baughman RH, Hart AJ (2013) Carbon nanotubes: present and future commercial applications. Science 339(6119):535–539CrossRefGoogle Scholar
  5. 5.
    Lu S, Guo Z, Ding W, Dikin DA, Lee J, Ruoff RS (2006) In situ mechanical testing of templated carbon nanotubes. Rev Sci Instrum 77(12):1192–1429CrossRefGoogle Scholar
  6. 6.
    Bei P, Mark L, Peter Z, Shuyou L, Mielke SL, Schatz GC, Espinosa HD (2008) Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements. Nat Nanotechnol 3(10):626–631CrossRefGoogle Scholar
  7. 7.
    Gyu PJ, Jeffrey L, Qunfeng C, Jianwen B, Jesse S, Richard L, Ben W, Chuck Z, Brooks JS, Leslie K (2009) Electromagnetic interference shielding properties of carbon nanotube buckypaper composites. Nanotechnology 20(41):415702CrossRefGoogle Scholar
  8. 8.
    Byrne MT, Gun’Ko YK (2010) Recent advances in research on carbon nanotube-polymer composites. Adv Mater 22(15):1672–1688CrossRefGoogle Scholar
  9. 9.
    Wetzel B, Rosso P, Haupert F, Friedrich K (2006) Epoxy nanocomposites—fracture and toughening mechanisms. Eng Fract Mech 73(16):2375–2398CrossRefGoogle Scholar
  10. 10.
    Jin AK, Dong GS, Kang TJ, Youn JR (2006) Effects of surface modification on rheological and mechanical properties of CNT/epoxy composites. Carbon 44(10):1898–1905CrossRefGoogle Scholar
  11. 11.
    Domun N, Hadavinia H, Zhang T, Sainsbury T, Liaghat GH, Vahid S (2015) Improving the fracture toughness and the strength of epoxy using nanomaterials–a review of the current status. Nanoscale 7(23):10294–10329CrossRefGoogle Scholar
  12. 12.
    Li Y, Huang X, Zeng L, Li R, Tian H, Fu X, Wang Y, Zhong WH (2019) A review of the electrical and mechanical properties of carbon nanofiller-reinforced polymer composites. J Mater Sci 54:1036–1076.  https://doi.org/10.1007/s10853-018-3006-9 CrossRefGoogle Scholar
  13. 13.
    Zhu J, Kim JD, Peng H, Margrave JL, Khabashesku VN, Barrera EV (2003) Improving the dispersion and integration of single-walled carbon nanotubes in epoxy composites through functionalization. Nano Lett 3(8):1107–1113CrossRefGoogle Scholar
  14. 14.
    Tang LC, Zhang H, Han JH, Wu XP, Zhang Z (2012) Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes. Compos Sci Technol 72(1):7–13CrossRefGoogle Scholar
  15. 15.
    Wei W, Isaac R, Ilkeun L, Francisco Z, Mihrimah O, Ozkan CS (2015) Improved functionality of graphene and carbon nanotube hybrid foam architecture by UV-ozone treatment. Nanoscale 7(16):7045–7050CrossRefGoogle Scholar
  16. 16.
    Hsieh TH, Kinloch AJ, Taylor AC, Sprenger S (2010) The effect of silica nanoparticles and carbon nanotubes on the toughness of a thermosetting epoxy polymer. J Appl Polym Sci 119(4):2135–2142CrossRefGoogle Scholar
  17. 17.
    Zhu J, Peng HQ, Rodriguez-Macias F, Margrave JL, Khabashesku VN, Imam AM, Lozano KE, Barrera EV (2010) Reinforcing epoxy polymer composites through covalent integration of functionalized nanotubes. Adv Funct Mater 14(7):643–648CrossRefGoogle Scholar
  18. 18.
    Lei X, Feng Z, Liang H, Liang C, Lan D (2018) Chemical grafting of nano-TiO2 onto carbon fiber via thiol–ene click chemistry and its effect on the interfacial and mechanical properties of carbon fiber/epoxy composites. J Mater Sci 53(4):2594–2603.  https://doi.org/10.1007/s10853-017-1739-5 CrossRefGoogle Scholar
  19. 19.
    Cheng Y, Huang J, Qi H, Cao L, Luo X, Li J, Xu Z, Yang J (2017) Controlling the Sn–C bonds content in SnO2@CNTs composite to form in situ pulverized structure for enhanced electrochemical kinetics. Nanoscale 9(47):18681–18689CrossRefGoogle Scholar
  20. 20.
    Suh D, Moon CM, Kim D, Baik S (2016) Ultrahigh thermal conductivity of interface materials by silver-functionalized carbon nanotube phonon conduits. Adv Mater 28(33):7220–7227CrossRefGoogle Scholar
  21. 21.
    Yuan W, Feng J, Judeh Z, Dai J, Chan-Park MB (2010) Use of polyimide-graft-bisphenol a diglyceryl acrylate as a reactive noncovalent dispersant of single-walled carbon nanotubes for reinforcement of cyanate ester/epoxy composite. Chem Mater 22(24):6542–6554CrossRefGoogle Scholar
  22. 22.
    Pulikkathara MX, Kuznetsov OV, Khabashesku VN (2008) Sidewall covalent functionalization of single wall carbon nanotubes through reactions of fluoronanotubes with urea, guanidine, and thiourea. Chem Mater 20(8):2685–2695CrossRefGoogle Scholar
  23. 23.
    Kang NG, Lu X, Hiremath N, Hong K, Evora M, Ranson V, Naskar A, Bhat G, Mays J (2017) Improving mechanical properties of carbon nanotube fibers through simultaneous solid-state cycloaddition and crosslinking. Nanotechnology 28(14):145603–145612CrossRefGoogle Scholar
  24. 24.
    Menezes BRCD, Ferreira FV, Silva BC, Simonetti EAN, Bastos TM, Cividanes LS, Thim GP (2018) Effects of octadecylamine functionalization of carbon nanotubes on dispersion, polarity, and mechanical properties of CNT/HDPE nanocomposites. J Mater Sci 53(9):1–17.  https://doi.org/10.1007/s10853-018-2627-3 Google Scholar
  25. 25.
    Li Y, Li R, Fu X, Yu W, Zhong WH (2018) A bio-surfactant for defect control: multifunctional gelatin coated MWCNTs for conductive epoxy nanocomposites. Compos Sci Technol 159:216–224CrossRefGoogle Scholar
  26. 26.
    Sabet SM, Mahfuz H, Terentis AC, Nezakat M, Hashemi J (2018) Effects of POSS functionalization of carbon nanotubes on microstructure and thermomechanical behavior of carbon nanotube/polymer nanocomposites. J Mater Sci 53(12):8963–8977.  https://doi.org/10.1007/s10853-018-2182-y CrossRefGoogle Scholar
  27. 27.
    Li Y, Huang X, Zeng L, Li R, Tian H, Fu X, Wang Y, Zhong WH (2019) A review of the electrical and mechanical properties of carbon nanofiller-reinforced polymer composites. J Mater Sci 54(2):1036–1076.  https://doi.org/10.1007/s10853-018-3006-9 CrossRefGoogle Scholar
  28. 28.
    Wang D, Zhang J, Quan L, Fu L, Zhang H, Bai Y (2003) Lanthanide complex/polymer composite optical resin with intense narrow band emission, high transparency and good mechanical performance. J Mater Chem 13(9):2279–2284CrossRefGoogle Scholar
  29. 29.
    Pan L, Huang X, Li J (2000) Novel single- and double-layer and three-dimensional structures of rare-earth metal coordination polymers: the effect of lanthanide contraction and acidity control in crystal structure formation. Angew Chem Int Ed 39(3):527–530CrossRefGoogle Scholar
  30. 30.
    Datsyuk V, Kalyva M, Papagelis K, Parthenios J, Tasis D, Siokou A, Kallitsis I, Galiotis C (2008) Chemical oxidation of multiwalled carbon nanotubes. Carbon 46(6):833–840CrossRefGoogle Scholar
  31. 31.
    Lebedkin S, Arnold K, Hennrich F, Krupke R, Renker B, Kappes MM (2003) FTIR-luminescence mapping of dispersed single-walled carbon nanotubes. New J Phys 5(1):140CrossRefGoogle Scholar
  32. 32.
    Stobinski L, Lesiak B, Kövér L, Tóth J, Biniak S, Trykowski G, Judek J (2015) Multiwall carbon nanotubes purification and oxidation by nitric acid studied by the FTIR and electron spectroscopy methods. J Alloys Compd 501(1):77–84CrossRefGoogle Scholar
  33. 33.
    Muilenberg GE (1979) Handbook of X-ray photoelectron spectroscopy. Perkin-Elmer Corporation, Waltham, p 64Google Scholar
  34. 34.
    Lee TH, Rabalais JW (1977) X-ray photoelectron spectra and electronic structure of some diamine compounds. J Electron Spectrosc Relat Phenom 11(1):123–127CrossRefGoogle Scholar
  35. 35.
    Novosselov A, Talik E, Pajaczkowska A (2003) An X-ray photoelectron spectroscopy study on electron structure of some Ln-containing (Ln = La, Pr, Nd and Gd) oxide crystals. J Alloys Compd 351(1):50–53CrossRefGoogle Scholar
  36. 36.
    Sun Z, Cheng X (2015) Investigation of carbon nanotube-containing film on silicon substrates and its tribological behavior. Appl Surf Sci 355(1):272–278CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.School of Mechanical EngineeringShanghai Jiao Tong UniversityShanghaiPeople’s Republic of China
  2. 2.College of Information, Mechanical and Electronic EngineeringShanghai Normal UniversityShanghaiPeople’s Republic of China
  3. 3.State Key Laboratory of TribologyTsinghua UniversityBeijingPeople’s Republic of China

Personalised recommendations