Advertisement

Journal of Materials Science

, Volume 54, Issue 13, pp 9995–10008 | Cite as

Fabrication of chitosan/alginate porous sponges as adsorbents for the removal of acid dyes from aqueous solution

  • Mengxiang Zeng
  • Wei Wu
  • Jianjun FangEmail author
  • Sufang LiEmail author
  • Zhihua ZhouEmail author
Polymers
  • 16 Downloads

Abstract

Effective wastewater remediation requires the development of suitable adsorbents. In this study, a strategy based on electrostatic interactions between the amino groups of chitosan and the anionic groups of acid dyes was developed for the removal of acid dyes from aqueous solution. By adjusting the fabrication parameters, chitosan/alginate porous sponges with controlled specific areas and pore structures were obtained. To enlarge the adsorption area, the adsorbents were processed via a freezing and lyophilization method to form three-dimensional porous sponges. Acid dyes in aqueous solution were adsorbed by the porous sponges, mainly through an electrostatic interaction mechanism. When the molar ratio of chitosan to alginate was fixed at 1.5:1, the porous sponges showed a maximum adsorption removal capacity of 1468.9 ± 16.3 mg g−1 for acid red B14 at a dye concentration of 150 mg L−1 and pH of 2. The adsorption capacity of this system was significantly enhanced compared with those of control groups such as chitosan powder. Thus, chitosan porous scaffolds provide a novel method for improving the removal capacities of chitosan-based materials for cleanup of acid–dye-contaminated water.

Notes

Acknowledgements

The work was supported by the National Natural Science Foundation of China (Grant nos. 81701844, 51773057 and 81701837), the Natural Science Foundation of Fujian Province (2017J05029) and Department of Education of Fujian Province (JAT160343), the National Experimental Teaching Demonstration Center of Chemical Engineering and Materials (2016 [7]), IUC Program of Hunan Provincial Education Department (No. 15CY004) and the Open-end Funds of Fujian Engineering, and Research Center of Rural Sewage Treatment and Water Safety (EBL2018006). We would also like to thank Editage [www.editage.cn] for English language editing.

References

  1. 1.
    Ratnamala G, Brajesh K (2013) Biosorption of remazol navy blue dye from an aqueous solution using pseudomonas putida. Int J Environ Sci Te 2(1):80–89Google Scholar
  2. 2.
    Attia AA, Rashwan WE, KhedrS SA (2006) Capacity of activated carbon in the removal of acid dyes subsequent to its thermal treatment. Dyes Pigments 69:128–136CrossRefGoogle Scholar
  3. 3.
    Wang JH, Zhang Z, Zhang Q, Liu JH, Ma JQ (2018) Preparation and adsorption application of carbon nanofibers with large specific surface area. J Mater Sci 53:16466–16475.  https://doi.org/10.1007/s10853-018-2772-8 CrossRefGoogle Scholar
  4. 4.
    Rêgo T, Cadaval T Jr, Dotto G, Pinto L (2013) Statistical optimization, interaction analysis and desorption studies for the azo dyes adsorption onto chitosan films. J Colloid Interfaces Sci 411:27–33CrossRefGoogle Scholar
  5. 5.
    Xing JS, Wang XJ, Xun JJ, Peng J, Xu Q, Zhang WX, Lou T (2018) Preparation of micro-nanofibrous chitosan sponges with ternary solvents for dye adsorption. Carbohyd Polym 198:69–75CrossRefGoogle Scholar
  6. 6.
    Vakili M, Rafatullah M, Salamatiniab B et al (2014) Application of chitosan and its derivatives as adsorbents for dye removal from water and wastewater: a review. Carbohyd Polym 113:115–130CrossRefGoogle Scholar
  7. 7.
    Muxika A, Etxabide A, Uranga J, Guerrero P, de la Caba K (2017) Chitosan as a bioactive polymer: processing, properties and applications. Int J Biol Macromol 105:1358–1368CrossRefGoogle Scholar
  8. 8.
    Dash M, Chiellini F, Ottenbrite RM, Chiellini E (2011) Chitosan—a versatile semisynthetic polymer in biomedical applications. Prog Polym Sci 36:981–1014CrossRefGoogle Scholar
  9. 9.
    Esquerdo VM, Cadaval TRS Jr, Dotto GL, Pinto LAA (2014) Chitosan scaffold as an alternative adsorbent for the removal of hazardous food dyes from aqueous solutions. J Colloid Interfaces Sci 424:7–15CrossRefGoogle Scholar
  10. 10.
    Bekc IZ, Özveri C, Seki Y, Yurdakoc K (2008) Sorption of malachite green on chitosan bead. J Hazard Mater 154(1):254–261CrossRefGoogle Scholar
  11. 11.
    Martinez L, Agnely F, Leclerc B, Siepmann J, Cotte M, Deiger S, Couarraze G (2007) Cross-linking of chitosan and chitosan poly(ethylene oxide) beads: a theoretical treatment. Eur J Pharm Biopharm 67:339–348CrossRefGoogle Scholar
  12. 12.
    Li CG, Wang F, Peng WG, He YH (2013) Preparation of chitosan and epichlorohydrin cross-linked adsorbents and adsorption property of dyes. Appl Mech Mater 423:584–587Google Scholar
  13. 13.
    Chan MY, Husseinsyah S, Sam ST (2013) Chitosan/corn cob biocomposite films by cross-linking with glutaraldehyde. BioResources 8(2):2910–2923CrossRefGoogle Scholar
  14. 14.
    Grégorio C (2005) Recent developments in polysaccharide-based materials used as adsorbents in wastewater treatment. Prog Polym Sci 30:38–70CrossRefGoogle Scholar
  15. 15.
    Guibal E (2005) Heterogeneous catalysis on chitosan-based materials: a review. Prog Polym Sci 30:71–109CrossRefGoogle Scholar
  16. 16.
    Azlan K, Wansaime WN, Lai Ken L (2009) Chitosan and chemically modified chitosan beads for acid dyes sorption. J Environ Sci 21(3):296–302CrossRefGoogle Scholar
  17. 17.
    Chatterjee S, Chatterjee T, Lim SR, Woo SH (2011) Effect of surfactant impregnation into chitosan hydrogel beads formed by sodium dodecyl sulfate gelation for the removal of congo red. Sep Sci Technol 46(13):2022–2031CrossRefGoogle Scholar
  18. 18.
    Li CY, Lou T, Yan X, Long YZ, Cui GP, Wang XJ (2018) Fabrication of pure chitosan nanofibrous membranes as effective absorbent for dye removal. Int J Biol Macromol 106:768–774CrossRefGoogle Scholar
  19. 19.
    Martin RV, Brenda VR, Rodrigo RZ, Daniel ASK, Luis FQO (2015) Chitosan and its potential use as a scaffold for tissue engineering in regenerative medicine. Biomed Res Int 2015:821279Google Scholar
  20. 20.
    Lu GY, Zhu L, Kong LJ, Zhang L, Gong YD, Zhao NM (2006) Porous chitosan MCs for large scale cultivation of cells for tissue engineering: fabrication and evaluation. Tsinghua Sci Technol 11:427–432CrossRefGoogle Scholar
  21. 21.
    Fang JJ, ZhangY Yan SF, Liu ZW, He SM, Cui L, Yin JB (2014) Poly(l-glutamic acid)/chitosan polyelectrolyte complex porous microspheres as cell microcarriers for cartilage regeneration. Acta Biomater 10:276–288CrossRefGoogle Scholar
  22. 22.
    Cui Z, Liu C, Lu T, Xing W (2007) Polyelectrolyte complexes of chitosan and phosphotungstic acid as proton-conducting membranes for direct methanol fuel cells. J Power Sources 167:94–99CrossRefGoogle Scholar
  23. 23.
    Holder KM, Smith RJ, Grunlan JC (2017) A review of flame retardant nanocoatings prepared using layer-by-layer assembly of polyelectrolytes. J Mater Sci 52:12923–12959.  https://doi.org/10.1007/S10853-017-1390-1 CrossRefGoogle Scholar
  24. 24.
    Ilina AV, Varlamov VP (2005) Chitosan-based polyelectrolyte complexes: a review. Appl Biochem Microbiol 41:5–11CrossRefGoogle Scholar
  25. 25.
    Yan SF, Zhang KX, Liu ZW, Xin Zhang, Gan Lu, Cao B, Chen XS (2013) Fabrication of poly(l-glutamic acid)/chitosan polyelectrolyte complex porous scaffolds for tissue engineering. J Mater Chem B 1:1541–1551CrossRefGoogle Scholar
  26. 26.
    Hamano T, Chiba D, Teramoto A, Kondo Y, Abe K (1998) Effect of polyelectrolyte complex (PEC) on human periodontal ligament Fibroblast (HPLF) functions in the presence of glucocorticoids. J Biomater Sci Polym Ed 9:985–1000CrossRefGoogle Scholar
  27. 27.
    Zhou ZH, Cao DF, Liu LH et al (2013) Fabrication and properties of gelatin/chitosan microspheres loaded with 5-fluorouracil. J Macromol Sci B 52:973–983CrossRefGoogle Scholar
  28. 28.
    Zhou ZH, Liu LH, Liu QQ et al (2012) Study on controlled release of 5-fluorouracil from gelatin/chitosan microspheres. J. Macromol Sci A 49:1030–1034CrossRefGoogle Scholar
  29. 29.
    Reed S, Wu BM (2017) Biological and mechanical characterization of chitosan-alginate scaffolds for growth factor delivery and chondrogenesis. J Biomed Mater Res B Appl Biomater 105(2):272–282CrossRefGoogle Scholar
  30. 30.
    Sneha K (2017) Self-functionalized, oppositely charged chitosan-alginate scaffolds for biomedical applications. Biotechnol Ind J 13(2):1–15Google Scholar
  31. 31.
    Florczyk SJ, Kievit FM, Wang K, Erickson AE, Ellenbogen RG, Zhang MQ (2016) 3D porous chitosan-alginate scaffolds promote proliferation and enrichment of cancer stem-like cells. J Mater Chem B Mater Biol Med 4(38):6326–6334CrossRefGoogle Scholar
  32. 32.
    Zhou ZH, Zhou JN, Liu LH, Yi QF, Liu QQ, Zeng WN, Yang ZM (2012) Fabrication and characterization of gelatin/chitosan microspheres for drug release. J Macromol Sci B 51:777–785CrossRefGoogle Scholar
  33. 33.
    Zeng S, Cui ZX, Yang ZQ et al (2016) Characterization of highly interconnected porous poly(lactic acid) and chitosan-coated poly(lactic acid) scaffold fabricated by vacuum-assisted resin transfer molding and particle leaching. J Mater Sci 51:9958–9970.  https://doi.org/10.1007/s10853-016-0203-2 CrossRefGoogle Scholar
  34. 34.
    He JX, Tan WL, Han QM, Cui SZh, Shao WL, Sang F (2016) Fabrication of silk fibroin/cellulose whiskers–chitosan composite porous scaffolds by layer-by-layer assembly for application in bone tissue engineering. J Mater Sci 51:4399–4410.  https://doi.org/10.1007/s10853-016-9752-7 CrossRefGoogle Scholar
  35. 35.
    Shimizu Y, Taga A, Yamaoka H (2003) Synthesis of novel crosslinked chitosans with a higher fatty diacid diglycidyl and their adsorption abilities towards acid dyes. Adsorpt Sci Technol 21(5):439–449CrossRefGoogle Scholar
  36. 36.
    Azlan K, Wansaime WN, Lai Ken L (2009) Chitosan and chemically modified chitosan beads for acid dyes sorption. J Environ Sci-China 21(3):296–302CrossRefGoogle Scholar
  37. 37.
    Ong ST, Seou CK (2013) Removal of reactive black 5 from aqueous solution using chitosan beads: optimization by Plackett–Burman design and response surface analysis. Desalin Water Treat 52:7673–7684CrossRefGoogle Scholar
  38. 38.
    Phung YP, Ong ST, Keng PS (2013) Determination of important parameters in affecting the uptake of reactive black 5 by chitosan beads through statistical approach. J Chemny 2013:1–7CrossRefGoogle Scholar
  39. 39.
    Sugimoto M, Morimoto M, Sashiwa H, Saimoto H, Shigemasa Y (1998) Preparation and characterization of water-soluble chitin and chitosan derivatives. Carbohydr Polym 36(1):49–59CrossRefGoogle Scholar
  40. 40.
    Sankalia MG, Mashru RC, Sankalia JM, Sutariya VB (2007) Reversed chitosan–alginate polyelectrolyte complex for stability improvement of alpha-amylase: optimization and physicochemical characterization. Eur J Pharm Biopharm 65:215–232CrossRefGoogle Scholar
  41. 41.
    Gümüsoglu T, Arı GA, Deligöz H (2011) Investigation of salt addition and acid treatment effects on the transport properties of ionically cross-linked polyelectrolyte complex membranes based on chitosan and polyacrylic acid. J Membr Sci 376:25–34CrossRefGoogle Scholar
  42. 42.
    Crini G, Gimbert F, Robert C et al (2008) The removal of basic blue 3 from aqueous solutions by chitosan-based adsorbent: batch studies. J Hazard Mater 153(1–2):96–106CrossRefGoogle Scholar
  43. 43.
    Kyzas GZ, Kostoglou M, Vassiliou AA, Lazaridis NK (2011) Treatment of real effluents from dyeing reactor: experimental and modeling approach by adsorption onto chitosan. Chem Eng J 168(2):577–585CrossRefGoogle Scholar
  44. 44.
    Tajizadegan H, Torabi O, Heidary A, Golabgir MH, Jamshidi A (2015) Study of methyl orange adsorption properties on ZnO–Al2O3 nanocomposite adsorbent particles. Desalinat Water Treat 57:12324–12334CrossRefGoogle Scholar
  45. 45.
    Xin S, Zeng Z, Zhou X et al (2017) Recyclable Saccharomyces cerevisiae loaded nanofibrous mats with sandwich structure constructing via bio-electrospraying for heavy metal removal. J Hazard Mater 324:365–372CrossRefGoogle Scholar
  46. 46.
    Madihally SV, Matthew HW (1999) Porous chitosan scaffolds for tissue engineering. Biomaterials 20:1133–1142CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Fujian Engineering and Research Center of Rural Sewage Treatment and Water Safety, School of Environmental Science and EngineeringXiamen University of TechnologyXiamenPeople’s Republic of China
  2. 2.School of Chemistry and Chemical EngineeringHunan University of Science and TechnologyXiangtanPeople’s Republic of China
  3. 3.Hunan Provincial Key Laboratory of Controllable Preparation and Functional Application of Fine PolymersHunan University of Science and TechnologyXiangtanPeople’s Republic of China
  4. 4.Key Laboratory of Theoretical Organic Chemistry and Function Molecule of Ministry of EducationHunan University of Science and TechnologyXiangtanPeople’s Republic of China
  5. 5.College of Chemistry and Chemical EngineeringHunan UniversityChangshaPeople’s Republic of China

Personalised recommendations