Advertisement

Journal of Materials Science

, Volume 54, Issue 13, pp 9553–9564 | Cite as

One-pot sonocatalyzed synthesis of sol–gel graphite electrodes containing gold nanoparticles for application in amperometric sensing

  • Maria Laura Ligabue
  • Fabio Terzi
  • Chiara ZanardiEmail author
  • Gigliola LusvardiEmail author
Electronic materials
  • 18 Downloads

Abstract

We propose here a one-pot synthetic approach to prepare sol–gel graphite electrodes containing gold nanoparticles (AuNPs). At variance with the traditional synthesis, in which AuNPs are prepared in advance with respect to the silica matrix, they were here obtained directly inside the sol–gel, during its formation. Two reduction methods, namely chemical and thermal reduction, were used to achieve AuNPs starting from a suitable gold precursor, either consisting of NaAuCl4 or HAuCl4. Different experimental parameters were tested in order to direct the synthesis of the material to the characteristics sought, namely Si/Au molar ratio, graphite (g): silane precursor (mL) ratio, chemical nature of the gold precursor and of the reductant, duration and temperature of thermal treatment. Sol–gel was prepared by means of sonocatalysis, in order to reduce the amount of solvent and time necessary for the hydrolysis step. Composition of the material, as well as shape, size and distribution of AuNPs inside the silica matrix was evaluated by spectroscopic and microscopic techniques. Furthermore, electrochemical tests allowed us to ascertain the good conductivity of the composite material and the electrocatalytic activity of AuNPs with respect to glucose and ascorbic acid oxidation. These tests demonstrated that the electrodes obtained by thermal reduction show the best performance in terms of sensitivity for the detection of these analytes, suggesting the possible application of this composite in the field of amperometric sensing.

Notes

Acknowledgements

This research was financed with funds from the University of Modena e Reggio Emilia, (Project FAR 2015, “Sviluppo Di Materiali A Base Silicatica Per Applicazioni Sensoristiche” Decreto rettorale n. 267/2016 Prot. n. 81676 del 28/06/2016). Authors also thank the “Centro Interdipartimentale Grandi Strumenti” (CIGS) of the University of Modena e Reggio Emilia for instrument availability and assistance.

Supplementary material

10853_2019_3580_MOESM1_ESM.docx (2.3 mb)
Supplementary material 1 (DOCX 2351 kb)

References

  1. 1.
    Tsionsky M, Gun M, Glezer M, Lev O (1994) Sol-gel-derived ceramic-carbon composite electrodes: introduction and scope of applications. Anal Chem 66:1747–1753CrossRefGoogle Scholar
  2. 2.
    Lev O, Tsionsky M, Rabinovich L, Glezer V, Sampath S, Pankratov I, Gun J (1995) Organically modified sol-gel sensors. Anal Chem 67:22A–30ACrossRefGoogle Scholar
  3. 3.
    Collinson MM, Howells AR (2000) Sol–gels and electrochemistry: research at the intersection. Anal Chem 72:702A–709AGoogle Scholar
  4. 4.
    Rabinovich L, Lev O (2001) Sol–gel derived composite ceramic carbon electrodes. Electroanal Int J Devoted Fundam Pract Asp Electroanal 13:265–275Google Scholar
  5. 5.
    Walcarius A, Mandler D, Cox JA, Collinson M, Lev O (2005) Exiting new directions in the intersection of functionalized sol–gel materials with electrochemistry. J Mater Chem 15:3663–3689CrossRefGoogle Scholar
  6. 6.
    Walcarius A (2001) Electroanalysis with pure, chemically modified, and sol–gel-derived silica-based materials. Electroanal Int J Devoted Fundam Pract Asp Electroanal 13:701–718Google Scholar
  7. 7.
    Walcarius A (2018) Silica-based electrochemical sensors and biosensors: recent trends. Curr Opin Electrochem 10:88–97CrossRefGoogle Scholar
  8. 8.
    Seeber R, Terzi F, Zanardi C (2014) Functional materials in amperometric sensing: polymeric, inorganic, and nanocomposite materials for modified electrodes. Springer, HeidelbergCrossRefGoogle Scholar
  9. 9.
    Juan-Díaz MJ, Martínez-Ibánez M, Hernández-Escolano M, Cabedo L, Izquierdo R, Suay J, Gurruchaga J, Goni I (2014) Study of the degradation of hybrid sol–gel coatings in aqueous medium. Prog Org Coat 77:1799–1806CrossRefGoogle Scholar
  10. 10.
    Brinker CJ, Scherer GW (1990) Sol gel science: the physic and chemistry of sol–gel processing. Academic Press Inc., New YorkGoogle Scholar
  11. 11.
    Cordero-Rando MM, Hidalgo-Hidalgo de Cisneros JL, Blanco E, Narajo-Rodriguez I (2002) The sonogel-carbon electrode as a sol–gel graphite-based electrode. Anal Chem 74:2423–2427CrossRefGoogle Scholar
  12. 12.
    Ballarin B, Zanardi C, Schenetti L, Seeber R, Hidalgo-Hidalgo de Cisneros JL (2003) Synthesis and electrochemical characterisation of novel sonogel-carbon-polythiophene microstructured electrodes. Synth Metals 139:29–33CrossRefGoogle Scholar
  13. 13.
    Abdelrahim MYM, Benjamin SR, Cubillana-Aguilera LM et al (2013) Study of electrocatalytic activity of cerium oxide and gold-studded cerium oxide nanoparticles using a sono-gel-carbon material as supporting electrode: electroanalytical study in apple juice for babies. Sensors 13:4979–5007CrossRefGoogle Scholar
  14. 14.
    Crespo-Rosa JR, Zanardi C, ElKaouitit M, Terzi F, Seeber R, Naranjo-Rodriguez I (2014) Electroanalytical applications of a graphite-Au nanoparticles composite included in a sonogel matrix. Electrochim Acta 122:310–315CrossRefGoogle Scholar
  15. 15.
    Daniel M-C, Astruc D (2014) Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology. Chem Rev 104:293–346CrossRefGoogle Scholar
  16. 16.
    Wang J, Pamidi PVA (1997) Sol–gel-derived gold composite electrodes. Anal Chem 69:4490–4494CrossRefGoogle Scholar
  17. 17.
    Jena BR, Raj CR (2006) Enzyme-free amperometric sensing of glucose by using gold nanoparticles. Chem Eur J 12:2702–2708CrossRefGoogle Scholar
  18. 18.
    Maduraiveeran G, Ramaraj R (1951) Gold nanoparticles embedded in silica sol-gel matrix as amperometric sensor for hydrogen peroxide. J Electroanal Chem 608:52–58CrossRefGoogle Scholar
  19. 19.
    Turkevich J, Stevenson PC, Hillier J (1951) A study of the nucleation and growth processes in the synthesis of colloidal gold. Discuss Faraday Soc 11:55–75CrossRefGoogle Scholar
  20. 20.
    McFarland AD, Haynes CL, Mirkin CA, Van Duyne RP, Godwin HA (2004) Color my nanoworld. J Chem Educ 81:544A–544BCrossRefGoogle Scholar
  21. 21.
    Lusvardi G, Malavasi G, Menabue L, Aina V, Bertinetti L, Cerrato G, Morterra C (2010) Bioactive glasses containing Au nanoparticles. Effect of calcination temperature on structure, morphology, and surface properties. Langmuir 26:10303–10314CrossRefGoogle Scholar
  22. 22.
    Larew LA, Johnson DC (1989) Concentration dependence of the mechanism of glucose oxidation at gold electrodes in alkaline media. J Electroanal Chem 262:167–182CrossRefGoogle Scholar
  23. 23.
    Burke LD, Ryan TG (1992) The role of incipient hydrous oxides in the oxidation of glucose and some of its derivatives in aqueous media. Electrochim Acta 37:1363–1370CrossRefGoogle Scholar
  24. 24.
    Bello A, Giannetto M, Mori G, Seeber R, Terzi F, Zanardi C (2007) Optimization of the DPV potential waveform for determination of ascorbic acid on PEDOT-modified electrodes. Sens Act B 121:430–435CrossRefGoogle Scholar
  25. 25.
    Zhao J, Griederich B (2015) Synthesis of gold nanoparticles via chemical reduction methods. In: 7th Nanocon, Brno, Czech Republic, EUGoogle Scholar
  26. 26.
    Rasband W, ImageJ Version 1.32J, National Institute of Mental Health, Bethesda, Maryland, USAGoogle Scholar
  27. 27.
    Gwyddion Version 2.53. http://gwyddion.net/. Accessed 2 Apr 2019
  28. 28.
    Angerstein-Kozlowska H, Conway BE, Hamelin A, Stoicoviciu L (1987) Filamentary steps of electrochemical oxidation of single crystal planes of Au. Part II: a chemical and structural basis of oxidation of the (111) plane. J Electroanal Chem 228:429–453CrossRefGoogle Scholar
  29. 29.
    PCPFWIN 2.3. JCPDS International center for diffraction data, 637 Swarthmore 2002Google Scholar
  30. 30.
    Toghill KE, Compton RG (2010) Electrochemical non-enzymatic glucose sensors: a perspective and an evaluation. Int J Electrochem Sci 5:1246–1301Google Scholar
  31. 31.
    Rueda M, Aldaz A, Sanchez-Burws F (1978) Oxidation of L-ascorbic acid on a gold electrode. Electrochim Acta 23:419–424CrossRefGoogle Scholar
  32. 32.
    Hu IF, Kuwana T (1986) Oxidative mechanism of ascorbic acid at glassy carbon electrodes. Anal Chem 58:3235–3239CrossRefGoogle Scholar
  33. 33.
    Manzanares MI, Solfs V, de Rossi RH (1986) Effect of cyclodextrins on the electrochemical behaviour of ascorbic acid on gold electrodes. J Electroanal Chem 407:141–147CrossRefGoogle Scholar
  34. 34.
    Zanardi C, Terzi F, Seeber R (2010) Composite electrode coatings in amperometric sensors. Effects of differently encapsulated gold nanoparticles in poly(3,4-ethylendioxythiophene) system. Sens Actuators B 148:277–282CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of Chemical and Geological SciencesUniversity of Modena e Reggio EmiliaModenaItaly

Personalised recommendations