Advertisement

Journal of Materials Science

, Volume 54, Issue 13, pp 9507–9522 | Cite as

Effects of glycine on mechanical properties and microstructure of diamond-reinforced Ni nanocomposite coatings

  • Yanheng Zhang
  • Lu FengEmail author
  • Wei QiuEmail author
Composites
  • 31 Downloads

Abstract

The diamond-reinforced Ni nanocomposite coatings were fabricated by a co-electrodeposition technique from a modified Watts-type bath in the presence of the organic additive glycine. Then, the effects of glycine on the morphology, microstructure, and mechanical properties of composite coatings were investigated based on scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffraction analysis, hardness testing, and wear testing. By optimizing the glycine concentration, the incorporation of diamond particles was increased from 8.07 to 15.53% at%, while the size of nickel crystallites decreased with increasing glycine content to a smallest size of 15 nm. The relationship between the glycine concentration, microstructure, and mechanical properties including microhardness and wear resistance of the composite coatings was examined. The coatings hardness increased from 280 to 580 HV as the glycine concentration increased from 0 to 10 g L−1. These increases in hardness were attributed to an increase in the content of embedded diamond particles in the coatings and the decrease in the nickel grain size. The friction and wear properties were evaluated as the concentration of glycine was optimized, showing a decrease in the wear volume from 37.8 × 10−3 to 17.9 × 10−3 mm3. The wear resistance of the composite coatings increased as the glycine content was increased to an optimum value of 10 g L−1, beyond which wear resistance decreased. Finally, a potential mechanism was proposed for explaining the effects of glycine on the microstructure and mechanical properties of the Ni–diamond nanocomposite coatings.

Notes

Acknowledgements

This work is financially supported by the National Natural Science Foundation of China (Grant Nos. 11772223, 11890682 and 61727810). We thank Andrew Jackson, PhD, from Liwen Bianji, Edanz Group China (www.liwenbianji.cn/ac), for editing the English text of a draft of this manuscript.

References

  1. 1.
    Huang W, Zhao Y, Wang X (2013) Preparing a high-particle-content Ni/diamond composite coating with strong abrasive ability. Surf Coat Technol 235:489–494CrossRefGoogle Scholar
  2. 2.
    Wang HT, Sheu HH, Hou KH, Ger MD (2014) Preparation and wear resistance of electrodeposited Ni–W/diamond composite coatings. Appl Surf Sci 308:372–379CrossRefGoogle Scholar
  3. 3.
    Ataie SA, Zakeri A (2016) Improving tribological properties of (Zn-Ni)/nano Al2O3composite coatings produced by ultrasonic assisted pulse plating. J Alloys Compd 674:315–322CrossRefGoogle Scholar
  4. 4.
    Zhou X, Shen Y (2014) A comparative study of pure nickel and the Ni-CeO2 nanocrystalline coatings: microstructural evolution, oxidation behavior, and thermodynamic stability. J Mater Sci 49:3755–3774.  https://doi.org/10.1007/s10853-014-8087-5 CrossRefGoogle Scholar
  5. 5.
    Gyawali G, Kim HS, Tripathi K, Kim TH, Lee SW (2014) Fabrication and characterization of electrodeposited Ni-SiC-h/BN composite coatings. J Mater Sci Technol 30:796–802CrossRefGoogle Scholar
  6. 6.
    Sajjadnejad M, Omidvar H, Javanbakht M, Mozafari A (2017) Textural and structural evolution of pulse electrodeposited Ni/diamond nanocomposite coatings. J Alloys Compd 704:809–817CrossRefGoogle Scholar
  7. 7.
    Ger MD (2004) Electrochemical deposition of nickel/SiC composites in the presence of surfactants. Mater Chem Phys 87:67–74CrossRefGoogle Scholar
  8. 8.
    Bełtowska-Lehman E, Góral A, Indyka P (2011) Electrodeposition and characterization of Ni/Al2O3 nanocomposite coatings. Arch Metall Mater 56:919–931Google Scholar
  9. 9.
    Das MK, Li R, Qin J et al (2017) Effect of electrodeposition conditions on structure and mechanical properties of Ni-W/diamond composite coatings. Surf Coat Technol 309:337–343CrossRefGoogle Scholar
  10. 10.
    Hsue AWJ, Chang YF (2016) Toward synchronous hybrid micro-EDM grinding of micro-holes using helical taper tools formed by Ni-Co/diamond Co-deposition. J Mater Process Technol 234:368–382CrossRefGoogle Scholar
  11. 11.
    Zhang X, Qin J, Das MK et al (2016) Co-electrodeposition of hard Ni-W/diamond nanocomposite coatings. Sci Rep 6:1–11CrossRefGoogle Scholar
  12. 12.
    Jiang SW, Pang JN, Yang L, Lin H, Wang ZQ (2016) Electrodeposition of Ni-Al2O3 composite coatings with combined addition of SDS and HPB surfactants. Surf Coat Technol 286:197–205CrossRefGoogle Scholar
  13. 13.
    Chen L, Wang L, Zeng Z, Zhang J (2006) Effect of surfactant on the electrodeposition and wear resistance of Ni-Al2O3 composite coatings. Mater Sci Eng A 434:319–325CrossRefGoogle Scholar
  14. 14.
    Sabri M, Sarabi AA, Naseri Kondelo SM (2012) The effect of sodium dodecyl sulfate surfactant on the electrodeposition of Ni-alumina composite coatings. Mater Chem Phys 136:566–569CrossRefGoogle Scholar
  15. 15.
    Vaezi MR, Sadrnezhaad SK, Nikzad L (2008) Electrodeposition of Ni-SiC nano-composite coatings and evaluation of wear and corrosion resistance and electroplating characteristics. Coll Surf A Physicochem Eng Asp 315:176–182CrossRefGoogle Scholar
  16. 16.
    Zhou Y, Xie FQ, Wu XQ, Zhao WD, Chen X (2017) A novel plating apparatus for electrodeposition of Ni-SiC composite coatings using circulating-solution co-deposition technique. J Alloys Compd 699:366–377CrossRefGoogle Scholar
  17. 17.
    Choi Y, Kim D, Son K, Lee S, Chung W (2015) Effect of added dispersants on diamond particles in Ni-diamond composites fabricated with electrodeposition. Met Mater Int 21:977–984CrossRefGoogle Scholar
  18. 18.
    Wang J, Zhang FL, Zhang T, Liu WG, Li WX, Zhou YM (2018) Preparation of Ni-P-diamond coatings with dry friction characteristics and abrasive wear resistance. Int J Refract Met Hard Mater 70:32–38CrossRefGoogle Scholar
  19. 19.
    Aruna ST, Bindu CN, Ezhil Selvi V, William Grips VK, Rajam KS (2006) Synthesis and properties of electrodeposited Ni/ceria nanocomposite coatings. Surf Coat Technol 200:6871–6880CrossRefGoogle Scholar
  20. 20.
    Cioatera N, Samide A, Maxut A, Vannier R, Traisnel M (2011) Electrodeposition of ni-ceria nanocomposite coatings and their corrosion behavior. Rev Roum Chim 56:1003–1009Google Scholar
  21. 21.
    Sen R, Sharma A, Bhattacharya S, Das S, Das K (2010) Synthesis and characterization of pulse co-electrodeposited nickel/ceria nanocomposites. J Nanosci Nanotechnol 10:4998–5003CrossRefGoogle Scholar
  22. 22.
    Fan LS, Constantin L, Li DW et al (2018) Ultraviolet laser photolysis of hydrocarbons for nondiamond carbon suppression in chemical vapor deposition of diamond films. Light Sci Appl 7:17177–17179CrossRefGoogle Scholar
  23. 23.
    Fan LS, Zhou YS, Wang MX, Gao Y, Liu L, Silvain JF, Lu YF (2014) Resonant vibrational excitation of ethylene molecules in laser-assisted diamond deposition. Laser Phys Lett 11:076002CrossRefGoogle Scholar
  24. 24.
    Lee EC, Choi JW (2001) A study on the mechanism of formation of electrocodeposited Ni-diamond coatings. Surf Coat Technol 148:234–240CrossRefGoogle Scholar
  25. 25.
    Lee WH, Tang SC, Chung KC (1999) Effects of direct current and pulse-plating on the co-deposition of nickel and nanometer diamond powder. Surf Coat Technol 120:607–611CrossRefGoogle Scholar
  26. 26.
    Zhou H, Du N, Zhu L, Shang J, Qian Z, Shen X (2015) Characteristics investigation of Ni-diamond composite electrodeposition. Electrochim Acta 151:157–167CrossRefGoogle Scholar
  27. 27.
    Ogihara H, Safuan M, Saji T (2012) Effect of electrodeposition conditions on hardness of Ni-B/diamond composite films. Surf Coat Technol 212:180–184CrossRefGoogle Scholar
  28. 28.
    Qin J, Zhang X, Xue Y, Kumar Das M, Thueploy A, Limpanar S, Liu R (2015) The high concentration and uniform distribution of diamond particles in Ni-diamond composite coatings by sediment co-deposition. Surf Interface Anal 47:331–339CrossRefGoogle Scholar
  29. 29.
    Wang Y, Yang C, He J, Wang W, Mitsuzake N, Chen Z (2016) Effects of choline chloride on electrodeposited Ni coating from a Watts-type bath. Appl Surf Sci 372:1–6CrossRefGoogle Scholar
  30. 30.
    Chung W, Lee S, Kim D, Son K, Choi Y (2016) Effect of propargyl alcohol on Ni-diamond composite electrodeposition for enhancing cutting performance. Korean J Met Mater 54:304–312CrossRefGoogle Scholar
  31. 31.
    Taranina OA, Evreinova NV, Shoshina IA, Naraev VN, Tikhonov KI (2010) Electrodeposition of nickel from sulfate solutions in the presence of aminoacetic acid. Russ J Appl Chem 83:58–61CrossRefGoogle Scholar
  32. 32.
    Lačnjevac U, Jović BM, Jović VD (2012) Electrodeposition of Ni, Sn and Ni–Sn Alloy coatings from Pyrophosphate-Glycine bath. J Electrochem Soc 159:D310–D318CrossRefGoogle Scholar
  33. 33.
    Sotskaya NV, Dolgikh OV (2008) Nickel electroplating from glycine containing baths with different pH. Prot Met 44:479–486CrossRefGoogle Scholar
  34. 34.
    Yang Y, Pan BS, Zhang YY (2017) Effect of glycine on properties of electroplated nickel coating. Mater Prot 50:69–72Google Scholar
  35. 35.
    Trzaska M, Mazurek A (2016) Properties of nanocomposite Ni/diamond coatings produced by the electrocrystallization method. Compos Theory Pract 16:37–41Google Scholar
  36. 36.
    Li X, Wei C, Yang Y (2005) Full field and microregion deformation measurement of thin films using electronic speckle pattern interferometry and array microindentation marker method. Opt Lasers Eng 43:869–884CrossRefGoogle Scholar
  37. 37.
    Mosavat SH, Bahrololoom ME, Shariat MH (2011) Electrodeposition of nanocrystalline Zn-Ni alloy from alkaline glycinate bath containing saccharin as additive. Appl Surf Sci 257:8311–8316CrossRefGoogle Scholar
  38. 38.
    Wang JS, Hsieh CC, Lai HH, Kuo CW, Wu TY, Wu W (2015) The relationships between residual stress relaxation and texture development in AZ31 Mg alloys via the vibratory stress relief technique. Mater Charact 99:248–253CrossRefGoogle Scholar
  39. 39.
    Van Huis MA, Van Veen A, Schut H et al (2002) Optical and structural properties of Li, Zn, Ag and Au nanoclusters embedded in MgO. Rev Adv Mater Sci 4:60–64Google Scholar
  40. 40.
    Wang L, Gao Y, Liu H, Xue Q, Xu T (2005) Effects of bivalent Co ion on the co-deposition of nickel and nano-diamond particles. Surf Coat Technol 191:1–6CrossRefGoogle Scholar
  41. 41.
    Ibrahim MAM, Al Radadi RM (2015) Role of glycine as a complexing agent in nickel electrodeposition from acidic sulphate bath. Int J Electrochem Sci 10:4946–4971Google Scholar
  42. 42.
    Bachmanna RT, Wiemkenac D, Tengkiatb AB, Wilichowskic M (2010) Feasibility study on the recovery of hexavalent chromium from a simulated electroplating effluent using Alamine 336 and refined palm oil. Sep Purif Technol 75:303–309CrossRefGoogle Scholar
  43. 43.
    Ergeneman O, Sivaraman KM, Pané S et al (2011) Morphology, structure and magnetic properties of cobalt-nickel films obtained from acidic electrolytes containing glycine. Electrochim Acta 56:1399–1408CrossRefGoogle Scholar
  44. 44.
    Guo J, Guo X, Wang S, Zhang Z, Dong J, Peng L, Ding W (2016) Effects of glycine and current density on the mechanism of electrodeposition, composition and properties of Ni-Mn films prepared in ionic liquid. Appl Surf Sci 365:31–37CrossRefGoogle Scholar
  45. 45.
    Hou KH, Ger MD, Wang LM, Ke ST (2002) The wear behaviour of electro-codeposited Ni-SiC composites. Wear 253:994–1003CrossRefGoogle Scholar
  46. 46.
    Mirzamohammadi S, Khorsand H, Aliofkhazraei M (2017) Effect of different organic solvents on electrodeposition and wear behavior of Ni-alumina nanocomposite coatings. Surf Coat Technol 313:202–213CrossRefGoogle Scholar
  47. 47.
    Ibrahim MAM, Al Radadi RM (2015) Noncrystalline cobalt coatings on copper substrates by electrodeposition from complexing acidic glycine baths. Mater Chem Phys 151:222–232CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Department of MechanicsTianjin UniversityTianjinChina
  2. 2.Tianjin Key Laboratory of Modern Engineering MechanicsTianjinChina

Personalised recommendations