The influences of multiscale second-phase particles on strength and ductility of cast Mg alloys
- 50 Downloads
Commercially cast Mg alloys generally contain two kinds of second-phase particles with different length scales, i.e. nanoscale precipitates and microscale particles. Both have substantial effect on the strength and ductility of Mg alloys, which, however, is still insufficiently understood up to now. Here in present work, a strengthening model and micromechanics model were, respectively, developed to quantitatively describe the individual influence and coupling effect of the two second-phase particles on yield strength and ductility. The relationships between the second-phase particles (size, volume fraction, aspect ratio and orientation) and strength or ductility, were ad hoc and experimentally validated in three Mg alloys with different precipitate orientations, i.e. Mg–3Gd alloy with prismatic plate precipitates, Mg–3.5Zn alloy with α rod precipitates and Mg–1Gd–0.4Zn–0.2Zr alloy with basal plate precipitates. Comparisons indicate that the calculations are in quite good agreement with the experimental data. It was commonly revealed that the precipitate strengthening (Orowan) makes a major contribution to the strength, which is highly dependent on the precipitate shape and orientation. On the other hand, the ductility is predominantly controlled by the microscale particles, which, serving as the microvoid initiators, have a detrimental effect on ductility much greater than the nanoscale precipitates.
This work was supported by the National Natural Science Foundation of China (Grant Nos. 51621063, 51625103, 51790482, 51761135031, 51722104, 51790484 and 51571157), the 111 Project of China (B06025) and the National Key Research and Development Program of China (2017YFB0702301). This work is also supported by the International Joint Laboratory for Micro/Nano Manufacturing and Measurement Technologies. JYZ is grateful for the Fok Ying-Tong Education Foundation (161096), China Postdoctoral Science Foundation (2016M590940, 2017T100744) and Shaanxi Province Postdoctoral Scientific Research Projects for part of financial support (2016BSHEDZZ09). KW thanks the support from the China Postdoctoral Science Foundation (2016M602811). We thank Prof. S. W. Guo (Xi’an Jiaotong University) for her help in TEM technique.
Compliance with ethical standards
Conflict of interest
The authors declare that they have no conflict of interest.
- 2.Kainer KU, Huang YD, Dieringa H, Hort N (2010) Status of the development of creep resistant magnesium materials for automotive applications. Mater Sci Forum 638–642:73–80. https://doi.org/10.4028/www.scientific.net/MSF.638-642.73 CrossRefGoogle Scholar
- 22.Yang C, Zhang P, Shao D, Wang RH, Cao LF, Zhang JY, Liu G, Chen BA, Sun J (2016) The influence of Sc solute partitioning on the microalloying effect and mechanical properties of Al–Cu alloys with minor Sc addition. Acta Mater 119:68–79. https://doi.org/10.1016/j.actamat.2016.08.013 CrossRefGoogle Scholar
- 33.Petch NJ (1953) The cleavage strength of polycrystals. J Iron Steel Inst 174:25–28Google Scholar
- 52.Scudino S, Liu G, Sakaliyska M, Surreddi KB, Eckert J (2009) Powder metallurgy of Al-based metal matrix composites reinforced with β-Al3Mg2 intermetallic particles: analysis and modeling of mechanical properties. Acta Mater 57:4529–4538. https://doi.org/10.1016/j.actamat.2009.06.017 CrossRefGoogle Scholar
- 71.Muránsky O, Barnett MR, Carr DG, Vogel SC, Oliver EC (2010) Investigation of deformation twinning in a fine-grained and coarse-grained ZM20 Mg alloy: combined in situ neutron diffraction and acoustic emission. Acta Mater 58:1503–1517. https://doi.org/10.1016/j.actamat.2009.10.057 CrossRefGoogle Scholar