Advertisement

Journal of Materials Science

, Volume 54, Issue 7, pp 5682–5694 | Cite as

Sedimentation of lithium–iron–phosphate and carbon black particles in opaque suspensions used for lithium-ion-battery electrodes

  • R. BalbiererEmail author
  • R. Gordon
  • S. Schuhmann
  • N. Willenbacher
  • H. Nirschl
  • G. Guthausen
Energy materials
  • 86 Downloads

Abstract

Sedimentation of opaque suspensions of carbon black and lithium–iron–phosphate was investigated by spin-echo-based magnetic resonance imaging. Optical methods are usually applied to determine settling velocities, but are limited with respect to high concentrations and optical transparency. The presented method uses intensity data from the noninvasively measured magnetic resonance signal of the sample. The settling velocity is obtained from the evolution of the signal intensity profiles based on the contrast in 1H magnetic resonance imaging between particles and liquid. New insights into the sedimentation in opaque suspensions are provided, since the 1H images uncover the spatial distribution of the particles and its agglomerates, as well as the shape of the settling front. Additionally, the sedimentation was experimentally studied using a sedimentation balance, which gravimetrically measures the increase in mass fraction over time due to the settling of particles. By parallel usage of these two methods, the sedimentation processes of opaque suspensions of lithium-ion-battery electrode materials were investigated. The sedimentation balance covers high, technically relevant concentrations. Limiting factors of the methods are discussed, which are mainly signal intensity in the magnetic resonance imaging and the increasing viscosity of highly concentrated suspensions.

Notes

Acknowledgements

The authors would like to thank the German Research Foundation (DFG) for financial support of the instrumental facility Pro2NMR. Furthermore, the authors thank the DFG for funding and the cooperative support within GRK 2218 SiMET—Simulation of mechano-electro-thermal processes in lithium-ion-batteries, project number: 281041241). R. Gordon gratefully acknowledges financial support by the 100 prozent erneuerbar Stiftung.

Compliance with ethical standards

Conflict of interest

The authors declare no conflicts of interest.

References

  1. 1.
    Chikkannanavar SB, Bernardi DM, Liu L (2014) A review of blended cathode materials for use in Li-ion batteries. J Power Sour 248:91.  https://doi.org/10.1016/j.jpowsour.2013.09.052 CrossRefGoogle Scholar
  2. 2.
    Wu H, Cui Y (2012) Designing nanostructured Si anodes for high energy lithium ion batteries. Nano Today 7:414.  https://doi.org/10.1016/j.nantod.2012.08.004 CrossRefGoogle Scholar
  3. 3.
    Berla LA, Lee SW, Ryu I, Cui Y, Nix WD (2014) Robustness of amorphous silicon during the initial lithiation/delithiation cycle. J Power Sourc 258:253.  https://doi.org/10.1016/j.jpowsour.2014.02.032 CrossRefGoogle Scholar
  4. 4.
    Zeng Z, Liu N, Zeng Q, Ding Y, Qu S, Cui Y, Mao WL (2013) Elastic moduli of polycrystalline Li15Si4 produced in lithium ion batteries. J Power Sourc 242:732.  https://doi.org/10.1016/j.jpowsour.2013.05.121 CrossRefGoogle Scholar
  5. 5.
    Bogart TD, Chockla AM, Korgel BA (2013) High capacity lithium ion battery anodes of silicon and germanium. Curr Opin Chem Eng 2:286.  https://doi.org/10.1016/j.coche.2013.07.001 CrossRefGoogle Scholar
  6. 6.
    Zuo X, Zhu J, Müller-Buschbaum P, Cheng Y-J (2017) Silicon based lithium-ion battery anodes: a chronicle perspective review. Nano Energy 31:113.  https://doi.org/10.1016/j.nanoen.2016.11.013 CrossRefGoogle Scholar
  7. 7.
    Chen T, Wu J, Zhang Q, Su X (2017) Recent advancement of SiOx based anodes for lithium-ion batteries. J Power Sour 363:126.  https://doi.org/10.1016/j.jpowsour.2017.07.073 CrossRefGoogle Scholar
  8. 8.
    Goriparti S, Miele E, De Angelis F, Di Fabrizio E, Proietti Zaccaria R, Capiglia C (2014) Review on recent progress of nanostructured anode materials for Li-ion batteries. J Power Sour 257:421.  https://doi.org/10.1016/j.jpowsour.2013.11.103 CrossRefGoogle Scholar
  9. 9.
    Xu J, Dou S, Liu H, Dai L (2013) Cathode materials for next generation lithium ion batteries. Nano Energy 2:439.  https://doi.org/10.1016/j.nanoen.2013.05.013 CrossRefGoogle Scholar
  10. 10.
    Scrosati B, Garche J (2010) Lithium batteries: status, prospects and future. J Power Sour 195:2419.  https://doi.org/10.1016/j.jpowsour.2009.11.048 CrossRefGoogle Scholar
  11. 11.
    Prosini PP, Lisi M, Zane D, Pasquali M (2002) Determination of the chemical diffusion coefficient of lithium in LiFePO4. Solid State Ion 148:45.  https://doi.org/10.1016/S0167-2738(02)00134-0 CrossRefGoogle Scholar
  12. 12.
    Andersson AS, Kalska B, Häggström L, Thomas JO (2000) Lithium extraction/insertion in LiFePO4: an X-ray diffraction and Mössbauer spectroscopy study. Solid State Ion 130:41.  https://doi.org/10.1016/S0167-2738(00)00311-8 CrossRefGoogle Scholar
  13. 13.
    Kenney B, Darcovich K, MacNeil DD, Davidson IJ (2012) Modelling the impact of variations in electrode manufacturing on lithium-ion battery modules. J Power Sour 213:391.  https://doi.org/10.1016/j.jpowsour.2012.03.065 CrossRefGoogle Scholar
  14. 14.
    Li J, Armstrong BL, Daniel C, Kiggans J, Wood DL (2013) Optimization of multicomponent aqueous suspensions of lithium iron phosphate (LiFePO4) nanoparticles and carbon black for lithium-ion battery cathodes. J Colloid Interface Sci 405:118.  https://doi.org/10.1016/j.jcis.2013.05.030 CrossRefGoogle Scholar
  15. 15.
    Zăbavă B, Ungureanu N, Vlădut V, Dincă M, Voicu G, Ionescu M (2016) Experimental study of the sedimentation of solid particles in wastewater. In: Annals of the University of Craiova-Agriculture, Montanology, Cadastre Series, vol 46, p 611Google Scholar
  16. 16.
    Lu W-M, Tung K-L, Pan C-H, Hwang K-J (1998) The effect of particle sedimentation on gravity filtration. Sep Sci Technol 33:1723.  https://doi.org/10.1080/01496399808545902 CrossRefGoogle Scholar
  17. 17.
    Turney MA, Cheung MK, Powell RL, McCarthy MJ (1995) Hindered settling of rod-like particles measured with magnetic resonance imaging. AIChE J 41:251.  https://doi.org/10.1002/aic.690410207 CrossRefGoogle Scholar
  18. 18.
    Morozov EV, Shabanova OV, Falaleev OV (2013) MRI comparative study of container geometry impact on the PMMA spheres sedimentation. Appl Magn Reson 44:619.  https://doi.org/10.1007/s00723-012-0432-8 CrossRefGoogle Scholar
  19. 19.
    Acosta-Cabronero J, Hall LD (2009) Measurements by MRI of the settling and packing of solid particles from aqueous suspensions. AIChE J 55:1426.  https://doi.org/10.1002/aic.11754 CrossRefGoogle Scholar
  20. 20.
    Bürger R, Wendland WL, Concha F (2000) Model equations for gravitational sedimentation-consolidation processes. ZAMM J Appl Math Mech 80:79.  https://doi.org/10.1002/(SICI)1521-4001(200002)80:2%3c79:AID-ZAMM79%3e3.0.CO;2-Y CrossRefGoogle Scholar
  21. 21.
    Lehtimäki M, Keskinen J, Janka K (1990) Sedimentation method in calibrating optical particle counters. Aerosol Sci Technol 12:711.  https://doi.org/10.1080/02786829008959386 CrossRefGoogle Scholar
  22. 22.
    Azema N (2006) Sedimentation behaviour study by three optical methods—granulometric and electrophoresis measurements, dispersion optical analyser. Powder Technol 165:133.  https://doi.org/10.1016/j.powtec.2005.10.015 CrossRefGoogle Scholar
  23. 23.
    Lerche D (2002) Dispersion stability and particle characterization by sedimentation kinetics in a centrifugal field. J Dispers Sci Technol 23:699.  https://doi.org/10.1081/DIS-120015373 CrossRefGoogle Scholar
  24. 24.
    Detloff T, Sobisch T, Lerche D (2007) Particle size distribution by space or time dependent extinction profiles obtained by analytical centrifugation (concentrated systems). Powder Technol 174:50.  https://doi.org/10.1016/j.powtec.2006.10.021 CrossRefGoogle Scholar
  25. 25.
    Rwei S-P, Ku F-H, Cheng K-C (2002) Dispersion of carbon black in a continuous phase: electrical, rheological, and morphological studies. Colloid Polym Sci 280:1110.  https://doi.org/10.1007/s00396-002-0718-8 CrossRefGoogle Scholar
  26. 26.
    Kawaguchi M, Okuno M, Kato T (2001) Rheological properties of carbon black suspensions in a silicone oil. Langmuir 17:6041.  https://doi.org/10.1021/la010560r CrossRefGoogle Scholar
  27. 27.
    Bobroff S, Phillips RJ (1998) Nuclear magnetic resonance imaging investigation of sedimentation of concentrated suspensions in non-Newtonian fluids. J Rheol 42:1419.  https://doi.org/10.1122/1.550895 CrossRefGoogle Scholar
  28. 28.
    Cheung MK, Powell RL, McCarthy MJ (1996) Sedimentation of noncolloidal bidisperse suspensions. AIChE J 42:271.  https://doi.org/10.1002/aic.690420125 CrossRefGoogle Scholar
  29. 29.
    Turney MA, Cheung MK, McCarthy MJ, Powell RL (1995) Magnetic resonance imaging study of sedimenting suspensions of noncolloidal spheres. Phys Fluids 7:904.  https://doi.org/10.1063/1.868566 CrossRefGoogle Scholar
  30. 30.
    Tucker MC, Doeff MM, Richardson TJ, Fiñones R, Reimer JA, Cairns EJ (2002) 7Li and 31 P magic angle spinning nuclear magnetic resonance of LiFePO4-type materials. Electrochem Solid State Lett 5:A95.  https://doi.org/10.1149/1.1464505 CrossRefGoogle Scholar
  31. 31.
    Grey CP, Dupré N (2004) NMR studies of cathode materials for lithium-ion rechargeable batteries. Chem Rev 104:4493.  https://doi.org/10.1021/cr020734p CrossRefGoogle Scholar
  32. 32.
    Tucker MC, Doeff MM, Richardson TJ, Fiñones R, Cairns EJ, Reimer JA (2002) Hyperfine fields at the Li site in LiFePO4-type olivine materials for lithium rechargeable batteries: a 7Li MAS NMR and SQUID study. J Am Chem Soc 124:3832.  https://doi.org/10.1021/ja017838m CrossRefGoogle Scholar
  33. 33.
    Wilcke SL, Lee Y-J, Cairns EJ, Reimer JA (2007) Covalency measurements via NMR in lithium metal phosphates. Appl Magn Reson 32:547.  https://doi.org/10.1007/s00723-007-0032-1 CrossRefGoogle Scholar
  34. 34.
    Buzlukov A, Gerbaud G, Bourbon C, Hediger S, De Paëpe G, Patoux S, Bardet M (2013) Application of 7Li NMR to characterize the evolution of intercalated and non-intercalated lithium in LiFePO4-based materials for Li-ion batteries. J Solid State Electr 17:1421.  https://doi.org/10.1007/s10008-013-2011-9 CrossRefGoogle Scholar
  35. 35.
    Dupré N, Oliveri J, Degryse J, Martin J-F, Guyomard D (2008) Characterization of the surface of positive electrodes for Li-ion batteries using 7Li MAS NMR. Ionics 14:203.  https://doi.org/10.1007/s11581-007-0189-5 CrossRefGoogle Scholar
  36. 36.
    Satyavani TVSL, Ramya Kiran B, Rajesh Kumar V, Srinivas Kumar A, Naidu SV (2016) Effect of particle size on dc conductivity, activation energy and diffusion coefficient of lithium iron phosphate in Li-ion cells. Eng Sci Technol Int J 19:40.  https://doi.org/10.1016/j.jestch.2015.05.011 CrossRefGoogle Scholar
  37. 37.
    Krieger IM (1959) A mechanism for non-newtonian flow in suspension of rigid spheres. Trans Soc Rheol 3:137–152.  https://doi.org/10.1122/1.548848 CrossRefGoogle Scholar
  38. 38.
    Quemada D (1977) Rheology of concentrated disperse systems and minimum energy dissipation principle. Rheol Acta 16:82.  https://doi.org/10.1007/BF01516932 CrossRefGoogle Scholar
  39. 39.
    Meeker SP, Poon WCK, Pusey PN (1997) Concentration dependence of the low-shear viscosity of suspensions of hard-sphere colloids. Phys Rev E 55:5718.  https://doi.org/10.1103/PhysRevE.55.5718 CrossRefGoogle Scholar
  40. 40.
    Tsai F-Y, Jhang J-H, Hsieh H-W, Li C-C (2016) Dispersion, agglomeration, and gelation of LiFePO4 in water-based slurry. J Power Sour 310:47.  https://doi.org/10.1016/j.jpowsour.2016.02.003 CrossRefGoogle Scholar
  41. 41.
    Lee J-H, Kim J-S, Kim YC, Zang DS, Paik U (2008) Dispersion properties of aqueous-based LiFePO4 pastes and their electrochemical performance for lithium batteries. Ultramicroscopy 108:1256.  https://doi.org/10.1016/j.ultramic.2008.04.027 CrossRefGoogle Scholar
  42. 42.
    Li C-C, Peng X-W, Lee J-T, Wang F-M (2010) Using poly(4-styrene sulfonic acid) to improve the dispersion homogeneity of aqueous-processed LiFePO4 cathodes. J Electrochem Soc 157:A517.  https://doi.org/10.1149/1.3308595 CrossRefGoogle Scholar
  43. 43.
    Guerfi A, Kaneko M, Petitclerc M, Mori M, Zaghib K (2007) LiFePO4 water-soluble binder electrode for Li-ion batteries. J Power Sour 163:1047.  https://doi.org/10.1016/j.jpowsour.2006.09.067 CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2019

Authors and Affiliations

  1. 1.Institute of Mechanical Process Engineering and MechanicsKarlsruhe Institute of Technology (KIT)KarlsruheGermany
  2. 2.Chair of Water Chemistry and Water TechnologyKarlsruhe Institute of Technology (KIT)KarlsruheGermany

Personalised recommendations