Wave propagation in a thermo-magneto-mechanical phononic crystal nanobeam with surface effects
Plane wave expansion method was applied to investigate the band gap properties of a proposed thermo-magneto-mechanical phononic crystal nanobeam with surface effects. Numerical results and further analysis demonstrate that band structure was indirectly affected by the influence of operating temperature on Young’s modulus of epoxy. Magnetic field had more effects on the band gaps of higher orders than lower orders. The influence rules of pre-stress were similar to magnetic field, but singular pre-stress appeared, which was bad for the opening of band gaps. With the increase in operating temperature or magnetic field, the value of singular pre-stress increased. In addition, the influences of surface effect and geometric parameters on band gaps were also studied in detail. Collectively, our results are expected to be helpful for the design of thermo-magneto-mechanical nanobeam-based devices.
This work was supported by the National Natural Science Foundation of China through Grant No. 11847009.
Compliance with ethical standards
Conflict of interest
The authors declare that they have no conflict of interest.
- 1.Sigalas M, Kushwaha MS, Economou EN et al (2005) Classical vibrational modes in phononic lattices: theory and experiment Z für Kristallogr-Cryst Mater 220(9):765–809Google Scholar
- 23.Yue Y, Xu K, Zhang X et al (2018) Effect of surface stress and surface-induced stress on behavior of piezoelectric nanobeam. Appl Math Mech (Engl Ed) 39(7):1–14Google Scholar
- 30.Zhang S, Shi Y, Gao Y (2015) A mechanical-magneto-thermal model for the tunability of band gaps of epoxy/Terfenol-D phononic crystals. J Appl Phys 118(3):065601-328Google Scholar
- 35.Liu Y, Xu A, Ning R (1999) Study of temperature and mechanical properties and constitutive equation for modified BMI/DPA and CTBN toughened epoxy. J Aeronaut Mater 3(1):44–51Google Scholar