Advertisement

Journal of Materials Science

, Volume 46, Issue 20, pp 6744–6750 | Cite as

Synthesis and morphology of new functional polyimide/titania nano hybrid materials

  • Hojjat Seyedjamali
  • Azadeh Pirisedigh
Article

Abstract

The synthesis and full characterization of 3,5-diamino-N-(1-oxo-3-phenyl-1-(phenylamino)propan-2-yl)benzamide (5), as a new diamine monomer containing l-phenylalanine fractions in the structure of pendant group is presented. The stated diamine is employed as a key monomer for the in situ sol–gel fabrication of polyimide/titania nano hybrid thin films containing different titania contents. It is shown that titania particles are created in the size range of 20–80 nm, well-dispersed and enjoy the favorable spherical shapes supposing the constructive organic–inorganic interactions. The superior thermal stabilities of resulted nanocomposite films are confirmed using thermal analysis techniques. Moreover, the UV–Vis spectroscopy has shown the growing up in blocking efficiency along with the increase in titania contents. Predictably, the produced titania nanoparticles have amorphous structures.

Keywords

Thermal Gravimetric Analysis Titania Content Titania Particle Titania Nanoparticles Amic Acid 

Notes

Acknowledgements

Financial support for this study from Research Affairs Division Islamic Azad University, Kazerun Branch, Iran, and Iran nanotechnology Initiative Council and National Elite Foundation (NEF) is greatly acknowledged.

References

  1. 1.
    Chau JLH, Liu HW, Su WF (2009) J Phys Chem Solid 70:1385CrossRefGoogle Scholar
  2. 2.
    Karim MR, Lim KT, Lee MS, Kim K, Yeum JH (2009) Synth Met 159:209CrossRefGoogle Scholar
  3. 3.
    Xu L, Xia Yang, Guo Y, Ma F, Guo Y, Yuan X, Huo M (2010) J Hazard Mater 178:1070CrossRefGoogle Scholar
  4. 4.
    Mi O, Ru B, Yi X, Cheng Z, Chune-an M, Mag W, Hong-zheng C (2009) Trans Nonferrous Met Soc China 19:1572CrossRefGoogle Scholar
  5. 5.
    Shah J, Yuan Q, Misra RDK (2009) Mat Sci Eng A 523:199CrossRefGoogle Scholar
  6. 6.
    Xie Y, Huang C, Zhou L, Liu Y, Huang H (2009) Compos Sci Technol 69:2108CrossRefGoogle Scholar
  7. 7.
    Ngo VG, Bressy C, Leroux C, Margaillan A (2009) Polymer 50:3095CrossRefGoogle Scholar
  8. 8.
    Sun L, Gibson RF, Gordaninejad F, Suhr J (2009) Compos Sci Technol 69:2392CrossRefGoogle Scholar
  9. 9.
    Takahashi S, Paul DR (2006) Polymer 47:7519CrossRefGoogle Scholar
  10. 10.
    Gutierrez-Tauste D, Domenech X, Casan-Pastor N, Ayllon JA (2007) J Photochem Photobiol A 187:45CrossRefGoogle Scholar
  11. 11.
    Amjadi M, Rowshanzamir S, Peighambardoust SJ, Hosseini MG, Eikani MH (2010) Int J Hydrogen Energy 35:9252CrossRefGoogle Scholar
  12. 12.
    Skorb EV, Ustinovich EA, Kulak AI, Sviridov DV (2008) J Photochem Photobiol A 193:97CrossRefGoogle Scholar
  13. 13.
    Li J, Yang X, Yu X, Xu L, Kang W, Yan W, Gao H, Liu Z, Guo Y (2009) Appl Surf Sci 255:3731CrossRefGoogle Scholar
  14. 14.
    Bellachioma G, Ciancaleoni G, Zuccaccia C, Zuccaccia D, Macchioni A (2008) Coord Chem Rev 252:2224CrossRefGoogle Scholar
  15. 15.
    Mandzy N, Grulke E, Druffel T (2005) Powder Technol 160:121CrossRefGoogle Scholar
  16. 16.
    Hojati B, Sui R, Charpentier PA (2007) Polymer 48:5850CrossRefGoogle Scholar
  17. 17.
    Hu Q, Marand E (1999) Polymer 40:4833CrossRefGoogle Scholar
  18. 18.
    Lee CH, Tenhaeff W, Gleason KK (2009) Thin Solid Films 517:3619CrossRefGoogle Scholar
  19. 19.
    Huang SH, Chen DH (2009) J Hazard Mater 163:174CrossRefGoogle Scholar
  20. 20.
    Tsai MH, Whang WT (2001) Polymer 42:4197CrossRefGoogle Scholar
  21. 21.
    Yudin VE, Otaigbe JU, Gladchenko S, Olson BG, Nazarenko S, Korytkova EN, Gusarov VV (2007) Polymer 48:1306CrossRefGoogle Scholar
  22. 22.
    Wang H, Zhong W, Xu P, Du Q (2005) Composites A 36:909CrossRefGoogle Scholar
  23. 23.
    Kim YJ, Chung IS, In I, Kim SY (2005) Polymer 46:3992CrossRefGoogle Scholar
  24. 24.
    Spiliopoulos IK, Mikroyannidis JA (1998) Macromolecules 31:515CrossRefGoogle Scholar
  25. 25.
    Yang CP, Su YY, Hsu MY (2006) Colloid Polym Sci 284:990CrossRefGoogle Scholar
  26. 26.
    Murugan R, Ramakrishna S (2004) Biomaterials 25:3829CrossRefGoogle Scholar
  27. 27.
    Chow D, Nunalee ML, Lim DW, Simnick AJ, Chilkoti A (2008) Mat Sci Eng R 62:125CrossRefGoogle Scholar
  28. 28.
    Angiolini L, Benelli T, Giorgini L, Mauriello F, Salatelli E, Bozio R, Dauru A, Pedron D (2007) Eur Polym J 43:3550CrossRefGoogle Scholar
  29. 29.
    Katsarava R (2003) Macromol Symp 199:419CrossRefGoogle Scholar
  30. 30.
    Art-Haddou H, Leeder SM, Gagne MR (2004) Inorg Chim Acta 357:3854CrossRefGoogle Scholar
  31. 31.
    Sanda F, Endo T (1999) Macromol Chem Phys 200:2651CrossRefGoogle Scholar
  32. 32.
    Zhao R, Torley P, Halley PJ (2008) J Mater Sci 43:3058. doi: https://doi.org/10.1007/s10853-007-2434-8 CrossRefGoogle Scholar
  33. 33.
    Kumar P, Sandeep KP, Alavi S, Truong VD, Gorga RE (2010) J Food Eng 100:480CrossRefGoogle Scholar
  34. 34.
    Broedling NC, Hartmaier A, Buehler MJ, Gao H (2008) J Mech Phys Solids 56:1086CrossRefGoogle Scholar
  35. 35.
    Seyedjamali H, Pirisedigh A (2011) Colloid Polym Sci 289:15–20CrossRefGoogle Scholar
  36. 36.
    Liaw WC, Chen KP (2007) Eur Polym J 43:2265CrossRefGoogle Scholar
  37. 37.
    Tsai MH, Chang CJ, Chen PJ, Ko CJ (2008) Thin Solid Films 516:5654–5658CrossRefGoogle Scholar
  38. 38.
    Chiang PC, Whang WT (2003) Polymer 44:2249CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2011

Authors and Affiliations

  1. 1.Department of ChemistryIslamic Azad UniversityKazerunIran

Personalised recommendations