Study on the flash pyrolysis of polyacrylamide: accelerator of Al–H2O-based propellants
- 190 Downloads
The flash pyrolysis of polyacrylamide (PAM) in Ar atmosphere was carried out in a tube-type pyrolyzer at 700 °C for 5 min. The volatile products were detected and identified by gas chromatography combined with mass spectrometry (GC/MS). Twenty four kinds of pyrolysis products were identified. In particular, some products, such as acetaldazine and 4-hydroxy-4-methyl-2-pentanone, were the first reported existing in the PAM pyrolysis products, which should play an important role in improving the igniting and combustion performance of Al–H2O-based propellants. Moreover, the flash pyrolysis residues were analyzed by FTIR. The experimental results show that the pyrolysis products of PAM can be roughly divided into five types. The products of five types promote the igniting and combustion performance of Al–H2O-based propellants, and the mechanisms of formation of every type are discussed.
KeywordsPyrolysis Pyrolysis Product Combustion Performance Aliphatic Ketone Propellant Combustion
The authors would like to acknowledge the financial support provided by the National Natural Science Foundation of China (No. 50806001.), and the Education Department Foundation of Anhui Province (KJ2008B184).
- 1.Bruno C, Ingenito A, Cuoco F (2002) In: Proceedings of the 18th international workshop on rocket propulsion: present and future, PozzulliGoogle Scholar
- 3.Miller TF, Herr JD (2004) In: 40th AIAA/ASME/SAE/ASEE joint propulsion conference and exhibit, Fort Lauderdale, FloridaGoogle Scholar
- 4.Foote JP, Thompson BR, Lineberry JT (2002) In: Roy G (ed) Advances in chemical propulsion. CRC Press, Boca RatonGoogle Scholar
- 5.Daughlon CG (1988) Quantitation of acrylamide (and polyacrylamide). The California public health foundationGoogle Scholar
- 7.Hoogers G (2003) Fuel cell technology handbook. CRC Press, Boca RatonGoogle Scholar
- 8.Risha GA, Ulas A, Kuo KK, Koch DE, Ludwig CP, Glick R (1999) Combustion behavior of TAL-1308 composite solid propellant for airbag applications. AIAA-1999-2632Google Scholar
- 10.O’Hayre RP, Cha SW, Colella W, Prinz FB (2006) Fuel cell fundamentals. Wiley, New YorkGoogle Scholar
- 11.Vasilev AV (1974) The effect of certain additives on critical diameter and combustion rates of mixtures of aluminum with gelled water. AD-A000210Google Scholar
- 17.Material Safety Data Sheet (2007) Mallin ckrodt Baker, Inc. Phillipsburg. https://doi.org/www.jtbaker.com/msds/englishhtml/H6549.htm. Accessed 15 Sept 2009