Advertisement

Journal of Materials Science

, Volume 43, Issue 17, pp 6024–6028 | Cite as

TEM analysis of Cr–Mo–W–B phase in a DS nickel based superalloy

  • H. R. Zhang
  • O. A. OjoEmail author
Letter

Rene 80 is a precipitation hardened nickel-based superalloy, which is widely used to manufacture components of gas turbine engines for aerospace and power generation applications. It is designed to withstand service temperatures of up to 980 °C [1] and possesses remarkable hot corrosion resistance, long-term microstructural stability, and high-temperature strength produced primarily by precipitation hardening by ordered intermetallic Ni3(Al,Ti) γ′ precipitates. Directional solidification (DS) processing of the alloy results in further improvement of its elevated temperature properties and permits the use of a higher service temperature, which improves the thermal efficiency of gas turbines [2, 3, 4, 5]. It has been reported that in DS Rene 80, the tensile strength is increased by about 10–15% and the creep rupture life is extended by 2–4 times relative to conventionally cast material [5]. Boron is an essential minor elemental addition to these heat resistant materials primarily to...

Keywords

Boride Electron Diffraction Pattern Directional Solidification Diffraction Spot Boride Particle 

Notes

Acknowledgement

The authors would like to thank NSERC of Canada for financial support.

References

  1. 1.
    Reed RC (2006) The superalloys—fundamentals and applications, 1st edn. Cambridge University Press, Cambridge, UK, pp 1–29Google Scholar
  2. 2.
    Nakagawa YG, Ohtomo A, Saiga Y (1976) Trans Jpn Inst Met 17:323CrossRefGoogle Scholar
  3. 3.
    Allen RE, Sidenstick JE (1980) Proceedings of ASME Century 2 Aerospace Conference (Paper No. 80-C2/AERO-10), San Francisco, California, 13–15 Aug 1980, p 1Google Scholar
  4. 4.
    Neidel A, Riesenbeck S, Ulrich T, Volker J, Yao C (2005) Materialpruefung Mater Test 47(10):553CrossRefGoogle Scholar
  5. 5.
    Raguet M, Antolovich SD, Payne RK (1984) In: Gell M et al (eds) Proceedings of superalloys conference. TMS, Seven Springs, PA, p 231Google Scholar
  6. 6.
    Garosshen TG, Tillman TD, McCarthy GP (1987) Metall Trans 18A:69CrossRefGoogle Scholar
  7. 7.
    Jena AK, Chaturvedi MC (1984) J Mater Sci 19:3121. doi: https://doi.org/10.1007/BF00549796 CrossRefGoogle Scholar
  8. 8.
    Tancret F, Bhadeshia HKDH (2003) Mater Sci Tech 19:291. doi: https://doi.org/10.1179/026708303225009797 CrossRefGoogle Scholar
  9. 9.
    Zhang HR, Ojo OA, Chaturvedi MC (2008) Scr Mater 58:167. doi: https://doi.org/10.1016/j.scriptamat.2007.09.049 CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2008

Authors and Affiliations

  1. 1.Department of Mechanical and Manufacturing EngineeringUniversity of ManitobaWinnipegCanada

Personalised recommendations