Advertisement

Journal of Materials Science

, Volume 43, Issue 15, pp 5325–5330 | Cite as

Improvement of dispersion stability and characterization of upconversion nanophosphors covalently modified with PEG as a fluorescence bioimaging probe

  • Tamotsu ZakoEmail author
  • Hiroyasu Nagata
  • Naofumi Terada
  • Masafumi Sakono
  • Kohei SogaEmail author
  • Mizuo Maeda
Article

Abstract

Upconverting (UC) phosphors (UCPs) are ceramic materials doped with rare earth ions. These materials can absorb and upconvert infrared (IR) radiation to emit visible light by the stepwise excitation among discrete energy levels of the rare earth ions. UCPs are potentially useful reagents for use in bioimaging since the use of low energy photons avoids photo-toxicity. The use of UCP nanoparticles as bioimaging probes requires surface modifications in an effort to improve dispersion stability in aqueous milieu. In this study, we covalently attached poly(ethylene glycol) (PEG) to the surface of Er-doped Y2O3 nanoparticles and firstly demonstrated that PEG covalently bound to the Y2O3 surface markedly improved dispersion stability in water. UC emission of PEG-modified Er–Y2O3 nanoparticles excited with IR light was successfully observed. We also showed that PEG-modified Er–Y2O3 nanoparticles exhibit no cell-toxicity. These observations lend strong support to the potential use of PEG-modified UCP nanoparticles as bioimaging tools.

Keywords

Y2O3 Dispersion Stability Yttrium Oxide Upconversion Emission Discrete Energy Level 

Notes

Acknowledgements

The authors thank Prof. Y. Nagasaki (Univ. of Tsukuba, Ibaraki, Japan) for his advice and discussion on the PEG modification of the particles. This work is financially supported by RIKEN and the Ministry of Education, Science, Sports, Culture, and Technology (MEXT) of Japan. K.S. was financially supported by “Development of upconversion nano-particles for bio-nano-photonics” from New Energy and Industrial Technology Development Organization (NEDO) of Japan.

Open Access

This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.

References

  1. 1.
    Holmes KL, Lantz LM (2001) Methods Cell Biol 63:185CrossRefGoogle Scholar
  2. 2.
    Choy G, Choyke P, Libutti SK (2003) Mol Imaging 2:303. doi: https://doi.org/10.1162/153535003322750646 CrossRefGoogle Scholar
  3. 3.
    Jaiswal JK, Mattoussi H, Mauro JM, Simon SM (2003) Nat Biotechnol 21:47. doi: https://doi.org/10.1038/nbt767 CrossRefGoogle Scholar
  4. 4.
    Wang F, Tan WB, Zhang Y, Fan X, Wang M (2006) Nanotechnology 17:R1. doi: https://doi.org/10.1088/0957-4484/17/1/R01 CrossRefGoogle Scholar
  5. 5.
    Chen X, Conti PS, Moats RA (2004) Cancer Res 64:8009. doi: https://doi.org/10.1158/0008-5472.CAN-04-1956 CrossRefGoogle Scholar
  6. 6.
    Cai W, Shin DW, Chen K, Gheysens O, Cao Q, Wang SX et al (2006) Nano Lett 6:669. doi: https://doi.org/10.1021/nl052405t CrossRefGoogle Scholar
  7. 7.
    Zijlmans HJ, Bonnet J, Burton J, Kardos K, Vail T, Niedbala RS et al (1999) Anal Biochem 267:30. doi: https://doi.org/10.1006/abio.1998.2965 CrossRefGoogle Scholar
  8. 8.
    Prasad PN (2004) Mol Cryst Liquid Cryst 415:1. doi: https://doi.org/10.1080/15421400490482943 CrossRefGoogle Scholar
  9. 9.
    Lim SF, Riehn R, Ryu WS, Khanarian N, Tung CK, Tank D et al (2006) Nano Lett 6:169. doi: https://doi.org/10.1021/nl0519175 CrossRefGoogle Scholar
  10. 10.
    Sivakumar S, Diamente PR, Van Veggel FC (2006) Chem Eur J 12:5878. doi: https://doi.org/10.1002/chem.200600224 CrossRefGoogle Scholar
  11. 11.
    Auzel F (2004) Chem Rev 104:139. doi: https://doi.org/10.1021/cr020357g CrossRefGoogle Scholar
  12. 12.
    Matsuura D (2002) Appl Phys Lett 81:4526. doi: https://doi.org/10.1063/1.1527976 CrossRefGoogle Scholar
  13. 13.
    Capobianco JA, Vetrone F, Boyer JC, Speghini A, Bettinelli M (2002) J Phys Chem B 106:1181. doi: https://doi.org/10.1021/jp0129582 CrossRefGoogle Scholar
  14. 14.
    Wuelfing W, Gross S, Miles D, Murray R (1998) J Am Chem Soc 120:12696. doi: https://doi.org/10.1021/ja983183m CrossRefGoogle Scholar
  15. 15.
    Otsuka H, Akiyama Y, Nagasaki Y, Kataoka K (2001) J Am Chem Soc 123:8226. doi: https://doi.org/10.1021/ja010437m CrossRefGoogle Scholar
  16. 16.
    Araki J, Wada M, Kuga S (2001) Langmuir 17:21. doi: https://doi.org/10.1021/la001070m CrossRefGoogle Scholar
  17. 17.
    Konishi T, Yamada M, Soga K, Matsuura D, Nagasaki Y (2006) J Photopolym Sci Technol 19:145. doi: https://doi.org/10.2494/photopolymer.19.145 CrossRefGoogle Scholar
  18. 18.
    Soga K, Koizumi R, Yamada M, Nagasaki Y (2005) J Photopolym Sci Technol 18:73. doi: https://doi.org/10.2494/photopolymer.18.73 CrossRefGoogle Scholar
  19. 19.
    Mosmann T (1983) J Immunol Methods 65:55. doi: https://doi.org/10.1016/0022-1759(83)90303-4 CrossRefGoogle Scholar
  20. 20.
    De Palma R, Peeters S, Van Bael MJ, Van Den Rul H, Bonroy K, Laureyn W et al (2007) Chem Mater 19:1821. doi: https://doi.org/10.1021/cm0628000 CrossRefGoogle Scholar
  21. 21.
    Heggli M, Tirelli N, Zisch A, Hubbell JA (2003) Bioconjug Chem 14:967. doi: https://doi.org/10.1021/bc0340621 CrossRefGoogle Scholar
  22. 22.
    Schubert D, Dargusch R, Raitano J, Chan SW (2006) Biochem Biophys Res Commun 342:86. doi: https://doi.org/10.1016/j.bbrc.2006.01.129 CrossRefGoogle Scholar
  23. 23.
    Palmer RJ, Butenhoff JL, Stevens JB (1987) Environ Res 43:142. doi: https://doi.org/10.1016/S0013-9351(87)80066-X CrossRefGoogle Scholar
  24. 24.
    Gharibyan AL, Zamotin V, Yanamandra K, Moskaleva OS, Margulis BA, Kostanyan IA et al (2007) J Mol Biol 365:1337. doi: https://doi.org/10.1016/j.jmb.2006.10.101 CrossRefGoogle Scholar
  25. 25.
    Sayes CM, Fortner JD, Guo W, Lyon D, Boyd AM, Ausman KD et al (2004) Nano Lett 4:1881. doi: https://doi.org/10.1021/nl0489586 CrossRefGoogle Scholar

Copyright information

© The Author(s) 2008

Open AccessThis is an open access article distributed under the terms of the Creative Commons Attribution Noncommercial License (https://doi.org/creativecommons.org/licenses/by-nc/2.0), which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.

Authors and Affiliations

  1. 1.Bioengineering LaboratoryRIKEN InstituteWakoJapan
  2. 2.Department of Materials Science and TechnologyTokyo University of ScienceNodaJapan

Personalised recommendations