Advertisement

Journal of Materials Science

, Volume 43, Issue 10, pp 3486–3490 | Cite as

Adsorption of polyanions on nanostructured polypyrrole submonolayer grafted on semiconducting transparent support

  • D. MartelEmail author
  • H. Nguyen CongEmail author
  • M. Molinari
  • J. Ebothé
  • I. V. Kityk
NanoSmat 2007 - International Conference on Surfaces, Coatings and Nanostructured Materials

Abstract

Polypyrrole submonolayers are formed on three different supports: indium oxide (In2O3), indium tin oxide (ITO) and tin oxide (SnO2). It is seen that this formation is a function of the nature of the substrates. Nanometric film scale has been checked by AFM measurements. These polypyrrole submonolayers allowed self-assembling with polyoxometalate \( {\text{SiMo}}_{{{\text{12}}}} {\text{O}}^{{{\text{4}} - }}_{{{\text{40}}}} \) and played a determining role in the adsorption characteristics.

Keywords

Atomic Force Microscopy SnO2 In2O3 Polypyrrole Hydrochloric Acid Solution 

References

  1. 1.
    Nalwa HS (Ed) (1997) Handbook of organic conductive molecules and polymers, vol 4. John Wiley and Sons LtdGoogle Scholar
  2. 2.
    Skoteim TA (Ed) (1986) Handbook of conducting polymer, vol 1. Marcel Decker, New YorkGoogle Scholar
  3. 3.
    Sadakane M, Steckhan E (1998) Chem Rev 98:219CrossRefGoogle Scholar
  4. 4.
    Yamase T (1998) Chem Rev 98:307CrossRefGoogle Scholar
  5. 5.
    Martel D, Gross M (2007) J Solid State Electrochem 11:421CrossRefGoogle Scholar
  6. 6.
    Bidan G, Genis EM, Lapkowski M (1988) J Electroanal Chem 251:297CrossRefGoogle Scholar
  7. 7.
    Otero TF, Cheng SA, Huerta F (2000) J Phys Chem B 107:10522CrossRefGoogle Scholar
  8. 8.
    Otero TF, Cheng SA, Alonso D, Huerta F (2000) J Phys Chem B 104:10528CrossRefGoogle Scholar
  9. 9.
    Cheng SA, Otero TF (2002) Synth Metals 129:53CrossRefGoogle Scholar
  10. 10.
    Tao W, Li Z, Pan D, Nie L, Yao S (2005) J Phys Chem B 109:2666CrossRefGoogle Scholar
  11. 11.
    Onoda M, Tada K, Shinkuma A (2006) Thin Solid Films 499:61CrossRefGoogle Scholar
  12. 12.
    Lan Y, Wang E, Song Y, Song Y, Kang Z, Xu L, Li Z (2006) Polymer 47:1480CrossRefGoogle Scholar
  13. 13.
    Hwang BJ, Santhanam R, Lin YL (2006) J Electrochem Soc 6:2252Google Scholar
  14. 14.
    Saidman SB, Bessone JB (2002) J Electroanal Chem 521:87CrossRefGoogle Scholar
  15. 15.
    Diaz AF, Crowley J, Bargon J, Gardini GP, Torrance JB (1981) J Electroanal Chem 121:355CrossRefGoogle Scholar
  16. 16.
    Gautier JL, Marco JF, Gracia M, Gancedo JR, de la Garza Guadarrama V, Nguyen-Cong H, Chartier P (2002) Electrochem Acta 48:119CrossRefGoogle Scholar
  17. 17.
    Martel D, Nguyen-Cong H, Ebothé J, Molinari M, Kityk IV, Science and Engineering of composite materials (submitted)Google Scholar

Copyright information

© Springer Science+Business Media, LLC 2008

Authors and Affiliations

  1. 1.Laboratoire d’Electrochimie et de Chimie Physique du Corps Solide, Institut de ChimieUMR 7177, CNRS-Université Louis PasteurStrasbourgFrance
  2. 2.Laboratoire de Microscopies & d’Etude de nanostructures, E.A. 3799, UFR Sciences ExactesUniversité de ReimsReims cedex 02France
  3. 3.Department of Solid State, Institute of PhysicsJ. Dlugosz University of CzestochowaCzestochowaPoland

Personalised recommendations