Advertisement

Journal of Materials Science

, Volume 42, Issue 18, pp 7657–7666 | Cite as

Cracking in the stir zones of Mg-alloy friction stir spot welds

  • Motomichi YamamotoEmail author
  • Adrian Gerlich
  • Thomas H. North
  • Kenji Shinozaki
Article

Abstract

Liquid penetration induced (LPI) cracking is investigated during friction stir spot weld of AZ91, AZ31 and AM60 magnesium alloys. A combination of stir zone temperature measurement and detailed metallography has revealed differences in the cracking tendencies of different magnesium alloys when the dwell time during spot welding is varied. LPI cracking in AZ91 spot welds involves the following sequence of events: the formation of \(\alpha-\hbox{Mg}\,+\,\hbox{Mg}_{17}\hbox{Al}_{12}\) eutectic films in the thermo-mechanically affected zone (TMAZ) region immediately adjacent to the stir zone extremity, engulfment of melted eutectic films as the stir zone width increases during the dwell period, penetration of α−Mg grain boundaries and crack propagation when torque is applied by the rotating tool. Cracking occurs early in the dwell period during AZ91 spot welding and almost the entire stir zone is removed when the rotating tool is withdrawn. However, crack-free AZ31 and AM60 spot welds are produced when a dwell time of 4 s is used since the stir zone temperatures are much higher than the α-Mg + Mg17Al12 eutectic temperature (437 °C) and melted eutectic films dissolve rapidly following their engulfment by the growing stir zone. In contrast, the temperature during the dwell period in AZ91 spot welding is close to 437 °C and melted eutectic films are not completely dissolved so that spot welds produced using a dwell time of 4 s exhibit LPI cracking.

Keywords

Dwell Time Spot Welding Spot Weld Friction Stir Spot Welding Friction Stir Spot Weld 

Notes

Acknowledgements

The authors wish to acknowledge financial support from the Natural Sciences and Engineering Research Council of Canada during this project.

References

  1. 1.
    Gerlich A, Su P, North TH, In: Neelameggham NR, Kaplan HI, Powell BR (TMS, 2005) Magnesium Technology 2005. pp 383–388Google Scholar
  2. 2.
    Su P, Gerlich A, North TH, SAE Technical Series, 2005-01-1255Google Scholar
  3. 3.
    Aritoshi M, Tomita T, Ikeuchi K, Takahashi M, Tani K, M. Ueda and Sakurai T, Preprints of the National Meeting of Jpn Weld Soc (2006.9) 123 (in Japanese)Google Scholar
  4. 4.
    Ikegami H, Tsumura T, Ueda M, Nakata K, Preprints of the National Meeting of Jpn Weld Soc (2006.9) 141 (in Japanese)Google Scholar
  5. 5.
    Yamamoto M, Su P, Gerlich A, North TH, Shinozaki K (2007) J Jpn Weld Soc 25(1):208 (in Japanese)CrossRefGoogle Scholar
  6. 6.
    Yamamoto M, Su P, A. Gerlich and North TH, SAE Technical Series, (2007), #2007-01-1700Google Scholar
  7. 7.
    Yamamoto M, Gerlich A, North TH, Shinozaki K (2007) accepted in Proc IWJC-Korea Int Weld./Joining Conf, Seoul, Korea, May 2007Google Scholar
  8. 8.
    Yamamoto M, Gerlich A, North TH, Shinozaki K (2007) Sci Tech Weld Joining 12(3):208CrossRefGoogle Scholar
  9. 9.
    SU P, Gerlich A, Yamamoto M, North TH (2006) In: Pekguleryuz MO, Mackenzie LWF (eds) Proc Int Symp on ‘Magnesium technology in the global age’, Montreal, Canada, October 2006, CIM, pp 479–492Google Scholar
  10. 10.
    Japan Magnesium Association (2000) In: Handbook of advanced magnesium technology. Kallos Publishing, Japan, p 90Google Scholar
  11. 11.
    Bassani P, Gariboldi E, Tuissi A (2005) J Thermal Anal Calorimet 80:739CrossRefGoogle Scholar
  12. 12.
    Gerlich A, Cingara GA, North TH (2006) Metall Trans 37A:2773CrossRefGoogle Scholar
  13. 13.
    Gerlich A, Su P, North TH (2005) Sci Tech Weld Joining 10(6):647CrossRefGoogle Scholar
  14. 14.
    Fernandes PJL, Jones DRH (1997) Int Mat Rev 42(6):251CrossRefGoogle Scholar
  15. 15.
    Ludwig W, Pereiro-lopez E, Bellet D (2005) Acta Mater 53:151CrossRefGoogle Scholar
  16. 16.
    Su P, Gerlich A, North TH, Bendzsak GJ (2007) Metall Trans 38A:584CrossRefGoogle Scholar
  17. 17.
    Whelan MJ (1969) Met Sci J 3:95CrossRefGoogle Scholar
  18. 18.
    Reiso O, Overlie H-G, Ryum N (1990) Metall Trans 21A:1689CrossRefGoogle Scholar
  19. 19.
    Lathabai S, Barton KJ, Harris D, Lloyd PG, Viano DM, Mclean A (2003) In: Magnesium Technology 2003. Kaplan HI (TMS, 2003), pp 157–162Google Scholar
  20. 20.
    Japan Magnesium Association (2000) In: Handbook of advanced magnesium technology. Kallos Publishing, Japan, p 132Google Scholar

Copyright information

© Springer Science+Business Media, LLC 2007

Authors and Affiliations

  • Motomichi Yamamoto
    • 1
    Email author
  • Adrian Gerlich
    • 2
  • Thomas H. North
    • 2
  • Kenji Shinozaki
    • 1
  1. 1.Department of Mechanical System Engineering, Graduate School of EngineeringHiroshima UniversityHigashi-HiroshimaJapan
  2. 2.Department of Materials Science and EngineeringUniversity of TorontoTorontoCanada

Personalised recommendations