Characterization of electrical behaviour of Si modified BaSnO3 electroceramics using impedance analysis
- 176 Downloads
- 13 Citations
Abstract
The compounds BaSn1−x Si x O3 (x = 0–15 mol%) have been prepared by high temperature solid-state reaction route. Powder X-ray diffraction pattern of the samples reveal the formation of a single phase solid solution. It was found that single phase compositions have a cubic crystal structure similar to that of pure barium stannate at room temperature. The a.c. impedance analysis has been carried out in the frequency range 100 Hz–1 MHz for temperature ranging from 300 K to 750 K. Analysis of a.c. impedance data using the complex impedance plane gives the a.c. and d.c. resistance of negative temperature resistance of coefficient (NTCR) electroceramics. Complex impedance plane and complex electric modulus formalism are employed to determine the inhomogeneous nature of the electroceramics. This reveals the presence of single elements in the equivalent circuit at elevated temperature. Grain effects are more prominent than that of grain boundary effect at elevated temperature in the material matrix. The electrical conductivity increases sharply with rise in temperature at elevated temperature due to the thermally activated cations. Master modulus analysis provided an evidence of non-exponential type conductivity relaxation occurring in the materials at higher temperatures.
Keywords
Modulus Formalism Equivalent Electrical Circuit High Frequency Side Complex Impedance Plane Single Phase Solid SolutionReferences
- 1.Claessen R, Smith MG, Goodenough JB (1993) Phys Rev B 47(4):1788CrossRefGoogle Scholar
- 2.Udawatte CP, Kakihana M, Yoshimura M (2000) Solid State Ionics 128:217CrossRefGoogle Scholar
- 3.Young LM (1979) J Mater Sci 14:1579CrossRefGoogle Scholar
- 4.Lu W, Jiang S, Zhou D, Gong S (2000) Sensors Actuat A: Phys 80(1):35CrossRefGoogle Scholar
- 5.Licheron M, Jouan G, Husson E (1997) J Eur Ceramic Soc 17:1453CrossRefGoogle Scholar
- 6.Azad AM, Shyam LLW, Yen PT (1999) J Alloys Comp 282:109CrossRefGoogle Scholar
- 7.Jayaraman V, Mangamma G, Gnasekaram T, Periaswami G (1996) Solid State Ionics 86:1111CrossRefGoogle Scholar
- 8.Rai RS, Sharama S, Choudhary RNP (2002) Ferroelectric 275:11CrossRefGoogle Scholar
- 9.Singh NK, Choudhary RNP, (2000) Ferroelectrics 242(1–4):89Google Scholar
- 10.Ginlely DS, Bright C (2000) Mater Res Soc Bull 25:15Google Scholar
- 11.Cerda J, Arbiol J, Dezanneau G, Diaz R, Morante JR (2002) Sensors Actuat B4:1Google Scholar
- 12.Ostrick B, Fleischer M, Lampe U, Meixner H (1997) Sensors Actuat B44:601CrossRefGoogle Scholar
- 13.Shimizu Y, Narikiyo T, Arai H, Seiyama T (1985) Chem Lett 377Google Scholar
- 14.Keppel A, Meixner H, Mock R (November 1998) (Siemens AG, Germany) US Patent 5840255, 24Google Scholar
- 15.Ku JK (June 1994) (Sam Hwa Capacitor, Korea), KR Patent 9405 993, 30Google Scholar
- 16.Kutty TRN, Vivekanandan R (1987) Mater Res Bull 11:1457CrossRefGoogle Scholar
- 17.Parida SC, Banerjee A, Das S, Prasad R, Singh Z, Venugopal V (2002) J Chem Thermodyn 34:527CrossRefGoogle Scholar
- 18.Tao S, Gao F, Liu X, Sorensen OT (2000) Sensors Actuat B 71:223CrossRefGoogle Scholar
- 19.Lampe U, Gerbling J, Meixner H (1995) Sensors Actuat B 24:657CrossRefGoogle Scholar
- 20.JCPDS File No: 15-780Google Scholar
- 21.POWDMULT: An Interactive Powder Diffraction Data Interpretation and Indexing ProgramVersion 2.1, E.Wu, School of Physical Sciences, Flinder University of South Australia, Bradford Park, SA 5042, AustraliaGoogle Scholar
- 22.Patel HK, Martin SW (1992) Phys Rev B 45:18CrossRefGoogle Scholar
- 23.Sinclair DC, West AR (1989) J Appl Phys 66(8):15CrossRefGoogle Scholar
- 24.James AR, Priya S, Uchino K, Srinivas K (2001) J Appl Phys 90:3504CrossRefGoogle Scholar
- 25.Bahuguna Saradhi V, Srinivas K, Prasad G, Suryanarayana SV, Bhimasankaram T (2003) Mater Sci Eng B 98:10CrossRefGoogle Scholar
- 26.Selvasekarapandian S, Vijaykumar M (2003) Mater Chem Phys 80:30Google Scholar