Advertisement

Journal of Materials Science

, Volume 41, Issue 19, pp 6353–6361 | Cite as

Brazing of 422 stainless steel using the AWS classification BNi-2 Braze alloy

  • C. L. Ou
  • D. W. Liaw
  • Y. C. Du
  • R. K. Shiue
Article

Abstract

The study of brazing 422 stainless steel (422SS) using the AWS classification BNi-2 braze alloy as the filler metal is evaluated in the study. The BNi-2 braze alloy demonstrates excellent wettability on the 422SS substrate for temperatures exceeding 1025 °C. The brazed joint is primarily comprised of the Ni-rich matrix and chromium boride. Additionally, the B–Cr–Fe precipitates are formed at the interface between the braze and 422SS. Some Kirkendall porosity is also observed in the braze close to the interface, due to nonsymmetrical interdiffusion between the braze and 422SS substrate. Shear strengths of brazed joints are varied from 306 to 481 MPa. The infrared brazed specimen shows the highest shear strength among all brazed specimens. Increasing brazing temperature and/or time result in decreased shear strength of the brazed joint.

Keywords

Braze Alloy Braze Temperature Average Shear Strength 422SS Substrate Chromium Boride 

Notes

Acknowledgements

The authors gratefully acknowledge the financial support of this research by the National Science Council (NSC), Republic of China under grant numbers, NSC 90-2216-E-259-003 and NSC 91-2216-E-259-002. EPMA analysis by Ms. Shu-Yueh Tsai in NSC Instrument Center, National Tsing Hua University, Hsinchu, Taiwan, is also gratefully appreciated.

References

  1. 1.
    Balmforth MC, Lippold JC (1998) Welding J 77:1sGoogle Scholar
  2. 2.
    Corbit RB, French SM (1997) Welding J 76:51Google Scholar
  3. 3.
    Armstrong D (1993) Welding World 31:426Google Scholar
  4. 4.
    Lee MK (1998) J Nucl Mater 254:42CrossRefGoogle Scholar
  5. 5.
    Chandler H (1995) Heat Treater’s Guide: practices and procedures for irons and steels. ASM International, Metals Park, Ohio, p 763Google Scholar
  6. 6.
    Davis JR (1994). ASM specialty handbook: stainless steels. ASM International, Metals Park, OhioGoogle Scholar
  7. 7.
    Han HY, Sun Z (1994) Inter J Pressure Vessels Piping 60:59CrossRefGoogle Scholar
  8. 8.
    Ginn BJ, Gooch TG (1998) Welding J 77:341sGoogle Scholar
  9. 9.
    Olson DL, Siewert TA, Liu S, Edwards GR (1993) ASM handbook Volume 6 welding, brazing, and soldering”. ASM International, Metals Park, OhioGoogle Scholar
  10. 10.
    Schwartz M (1995) Brazing: for the engineering technologist”. Chapman & Hall, New YorkGoogle Scholar
  11. 11.
    Humpston G, Jacobson DM (1993) Principles of soldering and brazing”. ASM International, Metals Park, Ohio, p 71Google Scholar
  12. 12.
    Shiue RK, Wu SK, Hung CM (2002) Metall Mater Trans 33A:1765CrossRefGoogle Scholar
  13. 13.
    Ou CL, Shiue RK (2003) J Mater Sci 38:2337CrossRefGoogle Scholar
  14. 14.
    Shiue RK, Wu SK, Chen SY (2003) Acta Meter 51:1991CrossRefGoogle Scholar
  15. 15.
    Yang TY, Wu SK, Shiue RK (2001) Intermetallics 9:341CrossRefGoogle Scholar
  16. 16.
    Lee YL, Shiue RK, Wu SK (2003) Intermetallics 11:187CrossRefGoogle Scholar
  17. 17.
    Shiue RK, Wu SK, O JM, Wang JY (2000) Metall Mater Trans 31A:2527CrossRefGoogle Scholar
  18. 18.
    Liu CC, Ou CL, Shiue RK (2002) J Mater Sci 37:2225CrossRefGoogle Scholar
  19. 19.
    Lee RE (1993) Scanning electron microscopy and X-ray microanalysis. Prentice Hall, New York, p 130Google Scholar
  20. 20.
    Villars P, Prince A, Okamoto H (1995) Handbook of ternary alloy phase diagrams. ASM International, Metals Park, Ohio, p 5508Google Scholar

Copyright information

© Springer Science+Business Media, LLC 2006

Authors and Affiliations

  • C. L. Ou
    • 1
  • D. W. Liaw
    • 1
  • Y. C. Du
    • 1
  • R. K. Shiue
    • 2
  1. 1.Department of Materials Science and EngineeringNational Dong Hwa UniversityHualienTaiwan
  2. 2.Department of Materials Science and EngineeringNational Taiwan UniversityTaipeiTaiwan

Personalised recommendations