Advertisement

Journal of Materials Science

, Volume 42, Issue 11, pp 3745–3753 | Cite as

A novel technology for powder dispersion and surface modification

  • Chu-jiang Cai
  • Zhi-gang ShenEmail author
  • Yan-hong Zheng
  • Yu-shan Xing
  • Shu-lin Ma
Article

Abstract

A novel technology for powder dispersion and surface modification was studied by experiment in this paper. In the process, powders are dispersed by the nozzle and the atomized modifying agent is sprayed into the dispersed particles and coated on the surface at the same time. Silica, mica and talc powders were dispersed and modified by this technology, the performance of powder dispersion is evaluated by the scanning electron microscope (SEM), and the performance of surface modification is evaluated in advance by the viscosity of powder-paraffin suspension. In experiment, the modified silica was filled in the polypropylene (PP), the impact fractographs, notched impact and tensile properties of the PP composites were studied, the results indicate that the developed technology is effective for powders dispersion and surface modification.

Keywords

Surface Modification Interface Adhesion Dispersion Force Modify Silica Develop Technology 

Notes

Acknowledgements

The authors acknowledge with gratitude the financial support of the National Nature Science Foundation of China (50474001), and the Joint Building Project of Beijing Education Committee.

References

  1. 1.
    Endo Y, Hasebe S, Kousaka Y (1997) Powder Technol 91:25CrossRefGoogle Scholar
  2. 2.
    Ren J, Lu SC, Shen J, Yu CH (2001) Mater Chem Phys 69:204CrossRefGoogle Scholar
  3. 3.
    Zhou T, Li HZ (2000) Powder Technol 111:60CrossRefGoogle Scholar
  4. 4.
    Kousaka Y, Okuyama K, Shimizu A, Yoshida T (1979) J Chem Eng Jpn 12:152CrossRefGoogle Scholar
  5. 5.
    Zahradnicek A, Loffler F (1979) Int Chem Eng 19:40Google Scholar
  6. 6.
    Krysztafkiewicz A, Grodzka J, Jesionowski T (2001) Pigm Resin Technol 30:348CrossRefGoogle Scholar
  7. 7.
    Jesionowski T, Zurawska J, Krysztafkiewicz A (2002) J Mater Sci 37:1621CrossRefGoogle Scholar
  8. 8.
    Krysztafkiewicz A, Rager B, Jesionowski T (1997) J Mater Sci 32:1333CrossRefGoogle Scholar
  9. 9.
    Slavov SV, Chuang KT, Sanger AR (1996) J Phys Chem 100:16285CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2007

Authors and Affiliations

  • Chu-jiang Cai
    • 1
  • Zhi-gang Shen
    • 1
    Email author
  • Yan-hong Zheng
    • 1
  • Yu-shan Xing
    • 1
  • Shu-lin Ma
    • 1
  1. 1.Beijing Key Laboratory for Powder Technology Research and DevelopmentBeijing University of Aeronautics and AstronauticsBeijingP.R. China

Personalised recommendations