Fabrication of cellular and microcellular ceramics with controllable open-cell content from polysiloxane-LDPE blends: I. Compounding and Foaming
- 237 Downloads
A novel processing route for fabricating cellular and microcellular ceramics with controllable open-cell content has been developed. The proposed strategy for producing cellular and microcellular ceramics involves: (i) development of desired foamable polysiloxane–polyolefin blends by using a compounder element, in which the polyolefin phase is uniformly dispersed in the polysiloxane matrix, (ii) foaming the obtained blends by implementing the thermodynamic instability principle to produce a cellular or microcellular ceramic precursor structure, and (iii) completing the organic–inorganic transition without sacrificing the obtained cellular or microcellular structure and inducing open-channels in the cell walls by burning out the sacrificial dispersed polyolefin phase at elevated temperatures. By controlling the viscosity of the dispersed polyolefin phase, the polyolefin concentration and compounding parameters, the polysiloxane–polyolefin blend morphology can be varied. Furthermore, plus a deliberate control of foaming and pyrolyzing parameters, the foam morphology and open-cell content of produced cellular and microcellular ceramics can be adjusted. In this paper, the technique to get a desired cellular and microcellular ceramic precursor structure is demonstrated. The deliberate pyrolysis technique to complete the organic–inorganic transition and the mechanical properties of the obtained microcellular ceramics will be discussed in another paper.
KeywordsFoam LDPE Polysiloxane Viscosity Ratio Ceramic Foam
The work at the University of Seoul was supported by the Center for Advanced Materials Processing (21C Frontier R&D Program of the Ministry of Commerce, Industry, and Energy, Republic of Korea).
- 1.Saggio-Woyansky J, Scott CE, Minnear WP (1992) Am Ceram Soc Bull 71:1674Google Scholar
- 4.Zhang GJ, Yang JF, Ohji T (2001) ibid 84:1395Google Scholar
- 8.Sepulveda P (1997) Am Ceram Soc Bull 76:61Google Scholar
- 12.Sherman AJ, Tuffias RH, Kaplan RB (1990) Am Ceram Soc Bull 70:1025Google Scholar
- 14.Aoki Y, Mcenaney B (1995) Br Ceram Trans 94:133Google Scholar
- 23.FAVIS BD (2000) In: Paul DR, Bucknall CB (eds) Polymer blends. John Wiley & Sons, New York, p 501, FormulationGoogle Scholar