Advertisement

Journal of Materials Science

, Volume 41, Issue 21, pp 6949–6955 | Cite as

The development of an affordable Kgalagadi Sand building block (KSBB)—a position paper

  • Esau U. Masuku
  • Botshelo H. Maedza
Article
  • 90 Downloads

Abstract

About ¾ of Botswana is covered by Kgalagadi Sands (KS). KS are invariably closely graded, consist of medium to fine sub-rounded particles and contain insignificant amounts of silty and clayey fractions. As a result of these physical and chemical properties, KS lack packing and therefore compactibility, have very high voids ratios and are cohesionless. Consequently, the wet and dry strengths (compressive, shear and flexural), dimensional stability, durability and aesthetics of building blocks moulded with KS alone, in the very rare cases where they occur with silts and clays of the right quantities and quality, are well below acceptable values.

This position paper describes the extensive experimental work currently underway at Botswana’s major multi-disciplinary Research and Development (R&D) Centre—Botswana Technology Centre. The work seeks to render this immensely abundant and widely available, but hitherto unusable resource, utilizable in construction. The affordability of the resultant KSBB shall derive from the local availability of KS as a raw material, usage of locally manufactured manually operated equipment and exploitation of local, largely unskilled labour force under supervision by semi-skilled artisans.

Keywords

Ordinary Portland Cement Pozzolanic Reaction Tricalcium Silicate Particle Size Distribution Curve Dicalcium Silicate 

References

  1. 1.
    Allen WJ (Ove Arup & Partners, London); Spence RJS (Cambridge University, Department of Architecture). A study of the activity of volcanic pozzolan in Northern TanzaniaGoogle Scholar
  2. 2.
    Botswana Power Corporation (BPC) (2001) A Report on the properties of Morupule Fly AshGoogle Scholar
  3. 3.
    Chhabra Mona et al. (1999) Hydraform Building Manual. Hydraform Group, Development Alternatives, South Africa, p 4Google Scholar
  4. 4.
    Houben H, Guilland H (1994) Earth construction. A comprehensive guide. Intermediate Technology Publications, London, UK, pp 74Google Scholar
  5. 5.
    Kudo TA Report on the Properties of Morupule Fly AshGoogle Scholar
  6. 6.
    Mockett LD, Barton ME (Southampton University) (1992) Woodbridge ME, Newill D (Transport Research Laboratory). Collapsing sand from the Kalahari region of Botswana, Transport Research Laboratory, p 16Google Scholar
  7. 7.
    New Zealand Standards. NZS4298:1998 (A Draft). Earth building not requiring specific designGoogle Scholar
  8. 8.
    Ragassi, V. (CRATerre—EAG). Compressed Earth Blocks (CEBs), vol 1. Manual ProductionGoogle Scholar
  9. 9.
    Sahu BK (1999) Unconfined compressive strength of fly-ash-stabilised soil. In Proceedings of the Kgalagadi Sand Building Block Workshop, 18–19 March, Gaborone, BotswanaGoogle Scholar
  10. 10.
    Scientific and Industrial Research and Development Centre (SIDRC), date taken from History amd properties of South African Flyash and Portland flyash cements. The South African Coal Ash Association (SACAA)Google Scholar

Copyright information

© Springer Science+Business Media, LLC 2006

Authors and Affiliations

  1. 1.Botswana Technology CentreMachel Drive GaboroneBotswana

Personalised recommendations