Advertisement

Journal of Materials Science

, Volume 41, Issue 17, pp 5793–5796 | Cite as

Nano-sized PDP phosphors prepared by solution combustion method

  • Zhe Chen
  • Youwei Yan
Letter

Recently, color plasma display panels (PDPs) have attracted considerable interest as a high-definition wall-attached TVs due to its obvious merits, such as a fast response, a wide viewing angle, large screen, low energy consumption, and high scalability [1, 2, 3, 4]. However, much improvement is needed concerning luminous efficiency, lifetime and color purity. In particular, superior display performance requires improvement in phosphors particle characteristics such as morphology and particle size on the luminescent intensity, efficiency, and resolution. BaMgAl10O17:Eu2+ (BAM) as a component of the blue-emitting phosphor used in the PDPs, shows a high emission efficiency and ideal chromaticity under vacuum ultraviolet (VUV) irradiation [5, 6, 7, 8].Thus far, commercialized BAM phosphors have been prepared by conventional solid-state synthesis route. However, the solid-state method has some disadvantages, such as (1) process complexity and energy-consuming (firing at high temperature,...

Keywords

Combustion Method Magnesium Aluminate Solution Combustion Synthesis Plasma Display Panel Solution Combustion Method 

Notes

Acknowledgment

This work was supported by the Natural Science Foundation of China (No. 50276023; No. 50574042).

References

  1. 1.
    Xing D-S, Cheah K-W, Cheng P-Y, Xu J, Shi J-X, Liang H-B, Gong M-L (2005) Solid State Commun 134:809CrossRefGoogle Scholar
  2. 2.
    Bizarri G, Moine B (2005) J Lumin 113:199CrossRefGoogle Scholar
  3. 3.
    Deng C, Zhuang W, He D, Wang Y, Kang K, Huang X (2004) Physica B 344:470CrossRefGoogle Scholar
  4. 4.
    Lu H-C, Chen H-K, Tseng T-Y, Kuo W-L, Alam MS, Cheng B-M (2005) J Electron Spectrosc Relat Phenom 144–147:983CrossRefGoogle Scholar
  5. 5.
    Zhang S, Kono T, Ito A, Yasaka T, Uchiike H (2004) J Lumin 106:39CrossRefGoogle Scholar
  6. 6.
    Jung KY, Lee DY, Kang YC, Park HD (2003) J Lumin 105:127CrossRefGoogle Scholar
  7. 7.
    Oshio S, Kitamura K, Shigeta T, Horii S, Matsuoka T, Tanaka S, Kobayashi H (1999) J Electrochem Soc 146:392CrossRefGoogle Scholar
  8. 8.
    Kima D-K, Hwang S-H, Kim I-G, Park J-C, Byeon S-H (2005) J Solid State Chem 178:1414CrossRefGoogle Scholar
  9. 9.
    Yang P, Yao G-Q (2004) Jian-Hua Lin Inorg Chem Commun 7:389CrossRefGoogle Scholar
  10. 10.
    Shikao S, Jiye W (2001) J Alloy Comp 327:82CrossRefGoogle Scholar
  11. 11.
    Gu F, Wang SF, Lu MK, Zou WG, Zhou GJ, Xu D, Yuan DR (2004) J Cryst Growth 260:507CrossRefGoogle Scholar
  12. 12.
    Jeon BS, Hong GY, Yoo YK, Yoo JS (2001) J Electrochem Soc 148:H128CrossRefGoogle Scholar
  13. 13.
    Lu C-H, Hsu W-T, Huang C-H, Godbole SV, Cheng B-M (2005) Mater Chem Phys 90:62CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2006

Authors and Affiliations

  1. 1.State Key Lab of Die & Mould TechnologyHuazhong University of Science and Technology Wuhan People’s Republic of China

Personalised recommendations