The best wildflowers for wild bees
Governmental agri-environment schemes (AES) aim to improve pollinator abundance and diversity on farmland by sowing wildflower seed mixes. These often contain high proportions of Fabaceae, particularly Trifolium (clovers), which are attractive to some bumblebee species, but not to most of the ~ 240 solitary bee species in the UK. Here we identify wildflowers that are attractive to a greater range of wild bee species. Forty-five wildflower species being farmed for commercial seed production on a single farm were surveyed for native bees. Bee walks were conducted through discrete wildflower areas from April until August in 2018. The results indicate that including a range of Apiaceae, Asteraceae, and Geraniaceae in seed mixes would cater for a wide diversity of bee species. A total of 14 wildflower species across nine families attracted 37 out of the 40 bee species recorded on the farm, and accounted for 99.7% of all visitations. Only two of these 14 species are included in current AES pollinator mixes. Unexpectedly, few visits were made by bumblebees to Trifolium spp. (0.5%), despite their being considered an important food source for bumblebees, while Anthyllis vulneraria and Geranium pratense were highly attractive. For solitary bees, Crepis capillaris, Sinapsis arvensis, Convolvulus arvensis and Chaerophyllum temulum were amongst the best performing species, none of which are usually included in sown flower mixes. We suggest that the standard ‘pollinator’ mixes used in AES might be updated to include some of these wildflower species, and trialled as seed mixes on farmland.
KeywordsAgri-environment scheme Wildflowers Solitary bees Bumblebees Pollinators Seed mix
Traditionally, honey bees have been the main or only managed crop pollinator, though there are instances of bumblebees and solitary bees (encompassing all non-corbiculate, non-Bombus wild bee species) being managed for enhancing pollination of specific crops (Gruber et al. 2011; Sheffield 2014; Zhang et al. 2015). However, recent studies have revealed that wild bees play a substantial role in crop pollination. In the UK, it is estimated that honey bees contribute at best 30% of crop pollination, the remainder being delivered by wild bees (Breeze et al. 2011). Crop yields improve with increased pollinator functional diversity (Hoehn et al. 2008), fruit and seed set improve when wild bees are present (Garibaldi et al. 2013; Campbell et al. 2017), and due to the loose pollen held on body hairs, individual visits by solitary bees often transfer more pollen than visits by honey bees (Woodcock et al. 2013). Additionally, wild bees are important for the pollination of wildflowers (Forup and Memmott 2005; Biesmeijer et al. 2006; Rollin et al. 2016), with some rarer wildflower species relying on specific native bees to ensure their survival (Gibson et al. 2006), and there is evidence that wildflowers might not be adequately pollinated with decreased pollinator abundance (Jacobs et al. 2009). It is therefore vital we maintain our wild bee populations to ensure the continued pollination of our crops and wildflowers.
Insects have been declining at alarming rates over the past century. The biomass of flying insects declined by 76% on nature reserves in Germany over the past 27 years (Hallmann et al. 2017), and although annual surveys of cereal crops in an area of southern UK reported an overall decline in insect abundance of 35% over 42 years, there was considerable variation between taxa, with some showing increases or no decline (Ewald et al. 2015, 2016). Specifically, the extinction rate of pollinating aculeates has increased significantly since the late nineteenth Century (Ollerton et al. 2014), with wild bees decreasing across 52% of areas within Britain (Biesmeijer et al. 2006). The Red List for wild bees in Europe (Nieto et al. 2014) estimates that 9.2% of wild bee species are ‘threatened’, increasing to over 60% of species when taking Data Deficient species into consideration, showing just how little data is available for the majority of wild bee species. Of the 77 European species given ‘threatened’ status, six of these species are native to the UK (Nieto et al. 2014). It is important to understand what is causing these declines so that we can prevent further loss of wild pollinators.
The majority of publications link pollinator and bee declines to various aspects of agricultural intensification, such as loss of flower-rich natural and semi-natural habitat (Biesmeijer et al. 2006), loss of safe nesting locations in close proximity to floral resources (Richards 2001; Goulson 2003), and increased frequency of application of pesticides over the last 80 years (Johansen 1977; Brittain et al. 2010; Goulson et al. 2015, 2018). Farmland makes up a large area of land in the UK (~ 70%), and therefore it needs to be managed in a way to ensure no further loss of pollinator diversity.
To counteract the loss of pollinators on farmland, member states of the European Union (EU) have committed to take nationwide action to address pollinator declines (Underwood et al. 2017) and the UK released its National Pollinator Strategy in 2014 (DEFRA 2014). These are predominantly achieved through agri-environment schemes (AES) as part of the Common Agricultural Policy (CAP). In the UK, the Environmental Stewardship Scheme established in 2005 included ‘Nectar flower mixture’ (EF4/HF4) and ‘Legume rich sward’ (EK21/HK21) options. These required a minimum of four and three Fabaceae species to be sown, respectively, forming 80–100% of the species found in the ‘Nectar flower mixture’ option, and covering a minimum of 20% of the sown area in ‘Legume rich sward’ option (DEFRA 2013a, b). These could be sown in rotating plots or along field margins in exchange for monetary returns. Under the new Countryside Stewardship (CS) scheme which first opened for applications in 2015, the ‘wild pollinator and farm wildlife package’ again includes a list of four suggested Fabaceae species in the ‘Nectar flower mix’ (AB1) to sow alongside two additional perennial species (DEFRA 2018). These plants chiefly target long-tongued bumblebees (Corbet 2006), and the sowing of these seed mixtures on farms has led to an increase in the abundance of a few common bumblebee species (Wood et al. 2015b). In contrast the commercial wildflower mixes used in Germany, although containing multiple Fabaceae species, are overall more diverse than the typical pollinator mixes used in the UK (Grass et al. 2016; Warzecha et al. 2018).
Fabaceae heavy mixtures, often containing a high proportion of Trifolium spp., are suggested to have been chosen based on an “educated guess” (Williams and Lonsdorf 2018) after typical grazing meadow wildflowers declined. However, these mixes do not cater for the needs of most of the wider native bee species, particularly the ~ 240 species of solitary bees. In the UK, only 32% of solitary bees present on farms visit the wildflowers sown in these mixtures (Wood et al. 2015a), with most visits by solitary bees to Centaurea nigra, Daucus carota, and Leucantheum vulgare, with very few visits to Trifolium spp. (Wood et al. 2017). Seventy three percent of foraging visits by solitary bees were to Asteraceae and Apiaceae found naturally on farmland and which were not part of sown mixes (Wood et al. 2015a). Additional research shows no visits were made by cavity-nesting bees in the UK to flowers sown as part of an AES seed mix (Gresty et al. 2018). This demonstrates that a large proportion of UK bee species are not benefitting directly from ‘pollinator’ seed mixes, and that there is scope to develop new mixes that cater for the needs of a greater diversity of wild bee species.
Many wildflower seed companies produce seeds of plant species that are not usually included in farmland seed mixes, and for which we do not have robust data on solitary bee visitation. By working with Emorsgate Seeds© on one of their commercial wildflower farms, we were able to gain access to large stands of wildflower species. Wild bees have been shown to focus their foraging on floral strips of lower species richness (Warzecha et al. 2018) but high floral density (Balzan et al. 2014). Therefore the wildflower stands essentially provided a choice experiment for natural wild bee populations. The majority of previous studies of wild bee visits to wildflowers have recorded bumblebee species but not solitary bees to species level (but see Wood et al. 2015a, 2017; Warzecha et al. 2018; Ouvrard et al. 2018). Here, we identified all bees to species (excluding the Bombus terrestris/lucorum complex). The aim of this project was to determine in an environment where each plant species was very plentiful (i) which cultivated wildflowers attract the greatest number of native bee species; (ii) which wildflower species attract which wild bee species, and therefore (iii) what wildflowers should be considered for inclusion in an improved seed mix intended to cater for a broader suite of bee species.
The study was conducted in 2018 at Emorsgate Seeds©, Manor Farm, a wildflower crop farm near Bath, UK (51°25′46.0″N 2°22′27.7″W). Wildflower crops were established as segregated wildflower strips of varying width in the clay-based soil from as early as 1999, with the most recent in 2017. These wildflower crops and weed areas of varying floral diversity were managed in a way to ensure maximum seed harvests without requiring ‘clean’ crops or using excessive amounts of agrochemicals. Some crops were inter-row sprayed with minimal amounts of industry-standard herbicides and a fungicide to minimise crop losses. Crops, weed strips, field margins and verges were monitored for flowering plant species from April to August, and distinct wildflower patches identified. A total of 31 wildflower transects were selected over the season, each surveyed whilst at their floral peak (at least 60–70% of plants in flower). Transects were 50 m in length and walked on two consecutive days (survey round). There were a total of eight survey rounds spread equally from April to August, and these were combined into four survey periods: 20th–21st Apr & 6th–7th May (Apr–May), 21st–22nd May & 10th–11th Jun (May–Jun), 22nd–23rd Jun & 8th–9th Jul (Jun–Jul), and 22nd–23rd Jul & 8th–9th Aug (Jul–Aug). Some patches were smaller, in which case the transect size was noted. Ideally we would have had replicated equal-sized patches of each plant species, but as this is a commercial operation this was not possible. Surveys were conducted between 08:30 and 17:00 when weather met the UK Butterfly Monitoring Scheme conditions: temperature above 13 °C with at least 60% clear sky, or 17 °C in any sky conditions, and not raining (Pollard and Yates 1993).
Wild bee surveys
Wild bees were recorded while walking along the 50 m transect, using standard bee walk protocols as in Carvell et al. (2006). Bees seen foraging on the target plant species within 2 m of the observer were recorded. Each was identified to species level either in the field or later in the laboratory after netting. Bombus terrestris, B. lucorum, B. cryptarum and B. magnus are impossible to reliably distinguish in the field, and were recorded as Bombus terrestris agg. No distinction was made between individuals foraging for pollen or nectar; and males, workers and queens were pooled together for data analysis.
Three random 10 × 2 m quadrats of each transect were selected, and number of flowers of each species present were counted within the following ranges as used in Heard et al. (2007): 1–5; 6–25; 26–200; 201–1000; 1001–4999; and 5000+ flower units (defined as a single flower or an umbel, spike or capitulum on multi-flowered stems). The median flower number of the range was then used to calculate the mean number of flowers for the quadrats and extrapolated for the transect (Heard et al. 2007).
All data analysis was handled in R (R Core Team 2018). Consecutive survey days were summed together to maximise the number of insects analysed in any one round for analysis, and modelled using the lme4 package (Bates et al. 2015). Survey rounds were summed together creating survey periods to better visualise the data. A scatter plot was constructed using gplots (Warnes et al. 2016) and heatmaps created using ggplot2 (Wickham 2016).
Wild bee richness and wild bee abundance were analysed separately. Richness was N + 1 transformed to deal with zero counts causing under-dispersion, and abundance was log (N + 1) transformed. Generalised Linear Models were built with the response variable ‘bee richness’ or ‘abundance’ and explanatory variables: wildflower species; survey round; wildflower species density per m2; transect floral richness; and transect size (no interactions). Stepwise removal of non-significant explanatory variables was conducted, AIC values were compared, and plot diagnostics of residuals of the final model were checked. For both bee richness and bee abundance, only ‘wildflower species’ and ‘survey period’ as explanatory variables were included in the final model. Poisson distribution with log link was used for both models. An ANOVA Chi squared test of each model was conducted to determine significance of explanatory variables.
Visitation records for each wildflower species were pooled by bee group (bumblebee or solitary bee), and bee richness against bee abundance was plotted. We built a Linear Model of ‘bee richness’ explained by ‘bee abundance (log N + 1)’ and ‘bee group’ to assess the fit of the plot. Solitary bees and bumblebees were then modelled separately to get the regression line statistics for each group. Plot diagnostics of residuals were checked for each model.
Surveys were conducted on 31 different wildflower transects, incorporating a total of 45 plant species that were specifically observed for wild bee visits. The wildflower transects were across seven adjoining fields and two roadside verges (Supplementary Information—S1). During wildflower surveys, 1691 wild bees were recorded foraging, encompassing 40 different species. Of these, solitary bees comprised 202 visits by 32 different species, and bumblebees comprised 1489 visits by six true social bumblebee species and two parasitic Psithyrus spp. (Supplementary Information—S2).
Some bee species were seen more regularly than others (Supplementary Information—S3). Bombus lapidarius was highly abundant and made up 54.8% of total wild bee visitation and 62.3% of bumblebee visitations, with the next most abundant bumblebee (B. terrestris agg.) comprising only 12.4% of Bombus visits. Of the ten genera of solitary bees seen, Andrena spp. had the highest abundance, comprising 59.4% of all solitary bee visits. Lasioglossum spp. were the next most abundant, making up 23.8% of all solitary bee visits. Multiple genera were represented by a single species, included Anthophora plumipes (6.9% of solitary bee visits) and Halictus tumulorum (5.0% of visits). Eleven species in total were recorded only once.
Wildflowers attracting greatest diversity of bees
Of the 45 wildflowers surveyed, solitary bees were found on 30 species across 14 families, and bumblebees found on 27 species across 13 families. Five wildflowers, Silene vulgaris, Geranium lucidium, Veronica chamaedrys, Ranunculus acris, and Viola arvensis, were not visited by any bees during the surveys.
Highest ranking wildflower species for wild bee richness over the season
Wild bee richness
Wild bee abundance
2, 3, 4
1, 2, 4
2, 3, 4
Comparing highest ranking wildflowers over the season for solitary bees and bumblebees
Although the species lists are of similar length for each bee group, only Crepis capillaris, Taraxacum agg., and Geranium pyrenaicum are seen in both, and the family diversity of wildflowers varies between both lists.
This list of 16 wildflowers again encompasses 37 out of 40 wild bee species, but only 78.8% of all visitations, the same species unaccounted for as before. Eleven bee species were recorded only once, and nine wildflowers were visited only once. To cater for the widest range of wild bees these scarcer bees would need to be taken into account. Inclusion of Campanula rotundifolia and Tripleurospermum inodorum in either wildflower list (Tables 1, 2) would result in maximum wild bee richness.
Species-specific attraction to different wildflowers
Bombus lapidarius and B. terrestris agg. visited a great range of wildflower species, 18 and 17 respectively, with most visits to Centaurea scabiosa (38.3% and 26.6% of visits respectively). Bombus lapidarius and B. terrestris agg. were the only bees recorded on Centaurea nigra, which received only 6.0% of all Bombus visits in comparison to 28.4% of Bombus visits to C. scabiosa. Bombus terrestris agg. were also observed in high numbers on Origanum vulgare (26.1% of visits). In strong contrast, B. hortorum showed reduced variability, as 98.5% of its visits were to Anthyllus vulneraria. Likewise, B. pascuorum favoured A. vulneraria, with 42.6% of visits. Bombus pascuorum was also the only bumblebee to visit at least four out of the five Fabaceae species surveyed. Anthyllus vulneraria received 13.6% of total Bombus visits, and Lotus corniculatus received 7.1%. Trifolium pratense and T. repens received only 0.5% of Bombus visits combined. Bombus pratorum and B. hypnorum were seen most regularly on Geranium pratense (87.3% and 48.3% of visits respectively). Therefore the list of wildflowers important to bumblebees (Table 2) encompasses the most significant wildflower for each of the bumblebees we recorded during surveys.
The majority of Andrena spp. visits (69.2%) fell within just two families, the Apiaceae and Asteraceae (51.7% and 15.5% respectively). Only Andrena wilkella was not seen on either family, foraging solely on Fabaceae (Anthyllus vulneraria and Lotus corniculatus). Andrena haemorrhoa and A. bicolor had the most diverse foraging ranges, recorded on eight and seven different wildflower species respectively, and across six flower families, recorded in high numbers on Primula vulgaris (21.7% and 37.5% respectively). Although Daucus carota received higher Andrena spp. richness (6/13) than Chaerophyllum temulum (4/13), the latter had more Andrena spp. visits overall (14.5% and 51.6% respectively). Taraxacum agg. were the key Asteraceae species for Andrena spp., attracting 47.6% of Andrena visits to this plant family.
Unlike Andrena spp., Lasioglossum spp. had greatest number of visits to Convolvulus arvensis (31.3%), Asteraceae (22.9%), and Geraniaceae (18.8%). Sonchus arvensis received the greatest percentage (55.6%) of Lasioglossum visits to Asteraceae. Lasioglossum calcaetum was observed to be the most diverse in its foraging, both within Lasioglossum and all solitary bees, recorded on ten different wildflower species, across seven different families. Finally, Sinapsis arvensis is also important to note, as it received 10.4% of Lasioglossum visits.
Halictus tumulorum was the sole Halictus spp. to be recorded, and visited six different wildflower species, with the majority of visits to Taraxacum agg. and Origanum vulgare. Anthophora plumipes was one of the earliest flying solitary bees, and ideally requires Primulaceae (57.1% of visits) or Lamium purpureum (28.6% of visits) to meet its foraging requirements. Additional solitary bees were not recorded regularly, and it would be difficult to make generalisations about their foraging habits based on these low numbers, however, overall they were found to be foraging predominantly on Asteraceae (66.7% of visits).
Optimal wildflower seed mixture
Comparison of recommended wildflowers
Wildflowers for maximum wild bee diversity (our study)
AB1: nectar flower mix
AB8: flower-rich margins and plots
Anthyllis vulneraria (Kidney vetch)
Campanula rotundifolia (Harebell)
Centaurea scabiosa (Greater knapweed)
Chaerophyllum temulum (Rough chervil)
Conopodium majus (Pignut)
Convolvulus arvensis (Bindweed)
Crepis capillaris (Smooth hawksbeard)
Daucus carota(Wild carrot)
Geranium pratense (Meadow cranesbill)
Geranium pyrenaicum (Hedgerow cranesbill)
Malva moschata(Musk mallow)
Origanum vulgare (Wild marjoram)
Papaver rhoeas (Poppy)
Primula vulgaris (Primrose)
Sinapsis arvensis (Charlock)
Sonchus arvensis (Perennial sow-thistle)
Taraxacum agg. (Dandelion)
Tripleurospermum inodorum (Scentless mayweed)
This study differs somewhat from traditional seed mix trials which contain plots of diverse mixes (Carvell et al. 2007; Uyttenbroeck et al. 2017; Warzecha et al. 2018), or farmland transect walks around field margins (Wood et al. 2015a, 2017). The majority of transects in this study had very low levels of plant diversity, and relatively high floral density due to the crop-like manner in which the plant species were established and managed. This essentially provided a choice experiment as wild bees were able to select their “preferred” species to forage from, given a wide choice of high density blocks.
Out of the 40 different wildflower species visited by wild bees, only 14 species from nine families attracted 99.7% of visits, and 92.5% of bee species (Table 1). The final list of 18 recommended wildflowers (Table 3) was sufficient to provide forage for 100.0% bee species observed. This finding is similar to Warzecha et al. (2018), who found a minimum of 14 wildflower species across seven families could achieve maximum wild pollinator diversity in Germany. Both studies agree that a range of Asteraceae species were vital for wild bee diversity, however, only Daucus carota appeared in both top 14 plant species lists. This shows that not all regional plant species are required in a seed mix, but just 14–18 key species could create a suitable mix that supports the full diversity of local wild bee populations. Of course there are many other species of pollinator beyond bees, and further research is needed to investigate how best to cater for all of their needs.
Bumblebee targeting seed mixes have historically composed of Fabaceae in the UK (particularly Trifolium spp. and Lotus corniculatus). However, our findings raise questions as to whether these are the best species for bumblebees. Not only were Asteraceae and Geraniaceae species the highest ranking for bumblebee richness and abundance, but only one Fabaceae, Anthyllis vulneraria, was in our top-ranking lists, a species not typically found in recommended mixes. Previous work found bumblebee richness and abundance to be highest in sown Fabaceae patches (Carvell et al. 2007). Trifolium species are not particularly rewarding in terms of nectar sugar content, but the pollen of Fabaceae is relatively rich in protein (Hanley et al. 2008), and it has been argued that this explains why they are popular with many bumblebees (Goulson et al. 2008). However, our findings suggest that, when other wildflower species are available in suitable densities, bumblebees would rather forage from these.
Wildflowers noted as being particularly important for bumblebee richness and abundance were Geranium pratense and Centaurea scabiosa. Neither are required in the current AES pollinator mixes (AB1 and AB8) (DEFRA 2018), however, they are occasionally included in other commercial mixes (Supplementary Information—S5). In contrast, Centaurea nigra is often the recommended perennial to add to wildflower mixes to ensure their continued bloom year on year (DEFRA 2018), but it never appeared in any of the top-ranking wildflower lists from our study. Not only is C. scabiosa a very similar Asteraceae, but it was visited by more species and individuals overall, it also has a longer flowering time. It might therefore make sense to consider including C. scabiosa in a pollinator mix, as it may attract additional pollinating species besides just wild bees.
A number of wildflowers we found to be important for bumblebees could easily be sown or added into mixes. Few were regarded as undesirable weeds (Table 2) and at least half are already regularly found in seed mixes provided by varying companies (S5) (Geranium pratense, Centaurea scabiosa, Origanus vulgare, Crepis capillaris, Leontodon hispidus, Taraxacum agg., Anthyllis vulneraria, Geranium pyrenaicum, Malva moschata).
Ten wildflower species across six families were highlighted as being important for optimum solitary bee richness (Table 2), in particular Apiaceae and Asteraceae species. Asteraceae were shown to be vital for multiple genera and species of solitary bees, with a total of 20.8% of solitary bee visitations to Asteraceae species. Although Andrena spp. showed a particular liking for Apiaceae, only Daucus carota has been previously used or recommended as a wildflower sown in seed mixes (Wood et al. 2015a, 2017; DEFRA 2018). Apiaceae such as Anthriscus sylvestris and Chaerophyllum temulum are often naturally found on farmland (Wood et al. 2017), so typically might not be included in a seed mix. However, our study shows that at least two or three different Apiaceae are required to support solitary bees.
Roughly half of the species we have suggested for solitary bees are considered “weeds” and wouldn’t typically be included in seed mixes, despite having some of the highest amounts of pollen and/or nectar in wildflowers (Hicks et al. 2016). For example, we suggest species such as Taraxacum agg., Crepis capillaris, and Tripleurospermum inodorum, all of which are rarely suggested for seed mixes, despite having high levels of pollen (Hicks et al. 2016). Our study reiterates previous research that suggests typical seed mixes rarely support wider bee fauna (Carvell et al. 2007; Balzan et al. 2014), and the importance of weeds and surrounding landscape flora for supporting solitary bees (Scheper et al. 2015; Wood et al. 2017; Sutter et al. 2017).
As with bumblebees, many wildflowers which are widely visited by bees in farmland were not preferred by bees in this study. For example, Wood et al. (2017) found that Leucanthemum vulgare and Heracleum sphondyllium received many solitary bee visits. In contrast, during our study these wildflowers had very few solitary bees observed foraging on them with Leucanthemum vulgare having only one recorded visiting solitary bee throughout the whole summer season. Wood et al. (2017) showed that as the proportion of flowering units of plant species sown as part of pollinator friendly management increased, so did the proportion of pollen visits be solitary bees. This suggests that they make use of whatever is most abundant, even if it is not their “preferred” foraging source.
Finally, the flight seasons of solitary bees should be taken into consideration when formulating a seed mixture. Many species have a relatively short flight season, some with a second generation that utilises an alternative foraging source to the first generation (Falk and Lewington 2015). Therefore, wildflowers must be selected that will flower during different months, with maximum coverage throughout the year. In particular, mixes that specifically contain earlier flower plants have previously been found to be more attractive to wild pollinators (Dicks et al. 2015; Wood et al. 2017).
We identify a relatively small number of wildflower species that are highly attractive to a broad range of bee species when bees are given a wide choice of flowers at high density. Interestingly, most of these species are not currently included in standard “pollinator” mixes, while the wildflowers that are included did not fare particularly well in our study. Overall, this suggests that there is scope for improvement of the seed mixes recommended to farmers and that seed mixes could be better tailored to attract a wider range of pollinators or to serve a more specific purpose. Flowering times should also be taken into consideration so that nectar flower mixes do not detract bees from crop pollination. However, it should be noted that some of the species that performed well in our study are weeds which might create agronomic difficulties. For example, Sinapsis arvensis is a serious weed of oilseed rape crops. It is unknown how well the species which were most attractive to bees in our study would perform when sown in mixtures on farmland.
We suggest that there is a need to trial mixtures containing these species alongside the current recommended wildflower mixes. This would show us how well the seed mixes establish in comparison to the current mixes, how well they provided forage throughout the year and over the years, whether any of these plant species would cause significant agronomic problems for farmers, and if any species are particularly dominant and out-compete the others.
We focus here on bees, but there are many other flower-visiting insects, such as Syrphidae, Lepidoptera, various wasps, beetles and many others which we should not forget. We are currently trialling wildflower mixes based on this study, aiming to fill some of these knowledge gaps, and determine the attractiveness of these mixes to other wild pollinators as well as native bees.
The author would like to thank Donald Macintyre and Jane Lipington (Emorsgate Seeds©) for their hospitality at Manor Farm, and Steven Falk for verifying identification of bee specimens.
R.N.N was funded by a NERC CASE studentship (NE/P009972/1) with additional support from The Game and Wildlife Conservation Trust.
Compliance with ethical standards
Conflict of interest
The authors declare no competing interests. Emorsgate Seeds© had no role in the study design, data collection and analysis, or writing of the paper.
This study received ethical approval from the University of Sussex Animal Welfare and Ethical Review Body (ARG/11/01).
- Corbet SA (2006) A typology of pollination systems: implications for crop management and the conservation of wild plants. In: Waser NM, Ollerton J (eds) Plant–pollinator interactions: from specialization to generalization. University of Chicago Press, ChicagoGoogle Scholar
- DEFRA (2013a) Entry level stewardship environmental stewardship handbook. www.naturalengland.org.uk. Accessed 25 Oct 2018
- DEFRA (2013b) Higher level stewardship environmental stewardship handbook. www.naturalengland.org.uk. Accessed 25 Oct 2018
- DEFRA (2014) The National Pollinator Strategy: for bees and other pollinators in England. Defra Publ. PB14221. https://www.gov.uk/government/publications/national-pollinator-strategy-for-bees-and-other-pollinators-in-england. Accessed 28 Jan 2019
- DEFRA (2018) Countryside stewardship: mid tier and new CS offers for wildlife manual. www.gov.uk/countrysidestewardship. Accessed 25 Oct 2018
- Ewald JA, Wheatley CJ, Aebischer NJ et al (2016) Investigation of the impact of changes in pesticide use on invertebrate populations. Natural England, YorkGoogle Scholar
- Falk SJ, Lewington R (2015) Field guide to the bees of Great Britain and Ireland. Bloomsbury Publishing Plc, London, FirstGoogle Scholar
- Goulson D (2003) Conserving wild bees for crop pollination. Food Agric Environ 1:142–144Google Scholar
- Nieto A, Roberts SP, Kemp J et al (2014) European red list of bees. Publication Office of the European Union, LuxembourgGoogle Scholar
- Pollard E, Yates TJ (1993) Monitoring butterflies for ecology and conservation: the British butterfly monitoring scheme. Chapman & Hall, LondonGoogle Scholar
- R Core Team (2018) R: a language and environment for statistical computing. R Core Team, ViennaGoogle Scholar
- Sheffield CS (2014) Pollination, seed set and fruit quality in apple: studies with Osmia lignaria (Hymenoptera: Megachilidae) in the Annapolis Valley, Nova Scotia, Canada. J Pollinat Ecol 12:120–128Google Scholar
- Sutter L, Jeanneret P, Bartual AM et al (2017) Enhancing plant diversity in agricultural landscapes promotes both rare bees and dominant crop-pollinating bees through complementary increase in key floral resources. J Appl Ecol 54:1856–1864. https://doi.org/10.1111/1365-2664.12907 CrossRefGoogle Scholar
- Underwood E, Darwin G, Gerritsen E (2017) Pollinator initiatives in EU Member States: success factors and gaps. Report for European Commission under contract for provision of technical support related to Target 2 of the EU Biodiversity Strategy to 2020—maintaining and restoring ecosystems and their services ENV.B.2/SER/2016/0018. BrusselsGoogle Scholar
- Warnes GR, Bolker B, Bonebakker L, et al (2016) gplots: various R programming tools for plotting data. R Packag. version 3.0.1Google Scholar
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.